The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Loofa egyptiaca as a novel adsorbent for removal of direct blue dye from aqueous solution

In this paper, Loofa egyptiaca (LE), an agricultural plant cultivated in Egypt, was used to prepare low-cost activated carbon (LE_C1 and LE_C2) adsorbents. The adsorbents (LE, LE_C1 and LE_C2) were evaluated for their ability to remove direct blue 106 dye from aqueous solutions. Batch mode experiments were conducted using various parameters such as pH, contact time, dye concentration and adsorbent concentration. The surface chemistry of LE, LE_C1 and LE_C2 was analyzed by scanning electron microscopy (SEM). The experimental data were examined using Langmuir, Freundlich, Temkin and Harkins–Jura isotherms. The results showed that the adsorption of direct blue 106 was maximal at the lowest value of pH (pH = 2). Removal efficiency was increased with an increase in dye concentration and a decrease in amount of adsorbent. Maximum adsorption capacity was found to be 57.14, 63.3 and 73.53 mg/g for LE, LE_C1 and LE_C2 respectively. Kinetics were also investigated using pseudo-first-order, pseudo-second-order and intra-particle diffusion models. The experimental data fitted very well with the pseudo-first-order and pseudo-second-order kinetic models. The results indicate that LE, LE_C1 and LE_C2 could be employed as adsorbents for the removal of direct blue dye from aqueous solutions.     

Using air quality modeling to study source–receptor relationships between nitrogen oxides emissions and ozone exposures over the United States

Human exposure to ambient ozone (O₃) has been linked to a variety of adverse health effects. The ozone level at a location is contributed by local production, regional transport, and background ozone. This study combines detailed emission inventory, air quality modeling, and census data to investigate the source–receptor relationships between nitrogen oxides (NO_x) emissions and population exposure to ambient O₃ in 48 states over the continental United States. By removing NO_x emissions from each state one at a time, we calculate the change in O₃ exposures by examining the difference between the base and the sensitivity simulations. Based on the 49 simulations, we construct state-level and census region-level source–receptor matrices describing the relationships among these states/regions. We find that, for 43 receptor states, cumulative NO_x emissions from upwind states contribute more to O₃ exposures than the state's own emissions. In-state emissions are responsible for less than 15% of O₃ exposures in 90% of U.S. states. A state's NO_x emissions can influence 2 to 40 downwind states by at least a 0.1 ppbv change in population-averaged O₃ exposure. The results suggest that the U.S. generally needs a regional strategy to effectively reduce O₃ exposures. But the current regional emission control program in the U.S. is a cap-and-trade program that assumes the marginal damage of every ton of NO_x is equal. In this study, the average O₃ exposures caused by one ton of NO_x emissions ranges from ? 2.0 to 2.3 ppm-people-hours depending on the state. The actual damage caused by one ton of NO_x emissions varies considerably over space.     

Use and knowledge of fuelwood in three rural caatinga (dryland) communities in NE Brazil

The woody species known, used, and preferred as fuelwood were examined in three rural communities within the county of Soledade, Paraíba State, NE Brazil. Ethnobotanical information was collected using semi-structured interviews with more than 90% of the local households (55 adult residents; 31 women, and 24 males). The interviewees cited 36 plant species as fuelwoods, distributed among 30 genera and 15 families, in addition to two unidentified plants. The plant families represented by the largest numbers of species were Euphorbiaceae, Anacardiaceae, Mimosaceae, Caesalpiniaceae, Sapotaceae, and Fabaceae. The species Caesalpinia pyramidalis Tul. (“catingueira”) was cited with the greatest frequency in all three communities. Within the communities we found significant differences on the number of plants cited and actually used (p < 0.05), indicating that the residents knew more fuelwood species than they effectively harvest. The different distances from the communities to the urban centers were not related to differences on the use or the size of the stocks of fuelwood. Additionally, the study revealed that the communities examined still maintain a significant knowledge of the use of energy-providing plants in spite of the widespread use of liquefied petroleum gas (LPG). Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Pyrolysis of permethrin and formation of precursors of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) under non-oxidative conditions

This article reports the computational and experimental results of the thermal decomposition of permethrin, a potential source of dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF). We have performed a quantum chemical analysis by applying density functional theory to obtain the decomposition pathways of permethrin and the formation mechanism of dibenzofuran. We have conducted the pyrolysis experiments in a tubular reactor and identified the pyrolysis products to demonstrate the agreement between the experimental measurements and quantum chemical calculations. The initiation of the decomposition of permethrin involves principally the aromatisation of permethrin into 3-phenoxyphenylacetic acid, 2-methylphenyl ester (J) and concomitant loss of 2HCl. This rearrangement is followed by the rupture of the O–CH₂ linkage in J, with a rate constant derived from the quantum chemical results of 1 × 10¹⁵ exp(−68 kcal/mol/RT) s⁻¹ for temperatures between 700 and 1300 K. This is confirmed by finding that the rate constant for unimolecular rearrangement of permethrin into J is 1.2 × 10¹² exp(−53 kcal/mol/RT) s⁻¹ over the same range of temperatures and exceeds the direct fission rate constant at all temperatures up to 850 ± 120 °C as well as by the experimental detection of J prior to the detection of the initial products incorporating diphenyl ether, 1-methyl-3-phenoxybenzene, 3-phenoxybenzaldehyde and 1-chloromethyl-3-phenoxybenzene. As the temperature increases, we observe a rise in secondary products formed directly or indirectly (via phenol/phenoxy) including aromatics (naphthalene), biphenyls (biphenyl, 4-methyl-1,1′-biphenyl) and dibenzofuran (DF). In particular, we discover by means of quantum chemistry a direct route from 2-phenoxyphenoxy to naphthalene. We detect no polychlorinated dibenzo-p-dioxins and dibenzofurans. Unlike the case of oxidative pyrolysis [Tame, N.W., Dlugogorski, B.Z., Kennedy, E.M., 2007b. Formation of dioxins in fires of arsenic-free treated wood: Role of organic preservatives. Environ. Sci. Technol. 41, 6425–6432] where significant yields of both PCDD and PCDF were obtained, under non-oxidative conditions the thermal decomposition of permethrin does not form appreciable amounts of PCDD or PCDF and the presence of oxygen (and/or a sizable radical pool) appears necessary for the formation of dibenzo-p-dioxin itself or PCDD/F from phenol/phenoxy.     

Renewable energy sources: conflicts and opportunities in a changing landscape

Regional Environmental Change - Replacement of conventional energy sources with renewables such as solar panels and wind turbines requires adequate land. Impact assessments should be conducted to...     

Atrazine contamination in agricultural soils from the Yangtze River Delta of China and associated health risks

Atrazine is one of the most widely applied and persistent herbicides in the world. In view of limited information on the regional contamination of atrazine in soils in China, this study investigated the spatial distribution and environmental impacts of atrazine in agricultural soils collected from the Yangtze River Delta (YRD) as an illustrative analysis of rapidly developing regions in the country. The results showed that the concentrations of atrazine in the YRD agricultural soils ranged from <1.0 to 113 ng/g dry weight, with a mean of 5.7 ng/g, and a detection rate of 57.7 % in soils. Pesticide factory might be a major source for the elevated levels of atrazine in Zhejiang Province. The contamination of atrazine was closely associated with land use types. The concentrations and detection rates of atrazine were higher in corn fields and mulberry fields than in rice paddy fields. There was no significant difference in compositions of soil microbial phospholipids fatty acids among the areas with different atrazine levels. Positive relationship (R = 0.417, p < 0.05, n = 30) was observed between atrazine and total microbial biomass. However, other factors, such as soil type and land management practice, might have stronger influences on soil microbial communities. Human health risks via exposure to atrazine in soils were estimated according to the methods recommended by the US EPA. Atrazine by itself in all the soil samples imposed very low carcinogenic risks (<10^?6) and minimal non-cancer risks (hazard index <1) to adults and children.     

Evaluation of existing equations for temporal scour depth around circular bridge piers

Scour is defined as the processes of removal of sediment particles from water stream bed by the erosive action of activated water, and also carries sediment away from the hydraulic structures. Scour is the main cause of pier failure. Numerous equations are available for estimating temporal and equilibrium scour depth. The present study describes the phenomenon of temporal scour depth variation at bridge piers and deals with the methods for its estimation. The accuracy of six temporal scour depth equations are also checked in this study. After graphical and statistical analysis, it was found that the relationship proposed by Oliveto and Hager (J Hydraul Eng (ASCE) 128(9):811–520, 2002) predicts temporal scour depth better than other equations. Three equations of equilibrium time of scour are also used for computing equilibrium time. Equilibrium time equation proposed by Choi and Choi (Water Environ J 30(1–2):14–21, 2016) gives better agreements with observed values.     

Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Gas-phase and semivolatile organic emissions from a modern nonroad diesel engine equipped with advanced aftertreatment

ABSTRACT

U.S. Tier 4 Final and Euro Stage IV and V regulations for nonroad compression-ignition engines have led to the development of exhaust aftertreatment technologies optimized for nonroad engines and duty cycles. In this study, several aftertreatment configurations consisting of state-of-the-art diesel oxidation catalysts (DOCs), diesel particulate filters (DPFs), copper (Cu) zeolite– and vanadium-based selective catalytic reduction (SCR) catalysts, and ammonia oxidation (AMOX) catalysts are evaluated using both nonroad transient (NRTC) and steady (8-mode NRSC) cycles in order to understand both component- and system-level effects of diesel aftertreatment on gas-phase, semivolatile, and particle-phase and particle-bound unregulated organic emissions. Organic emissions reported in this work include total hydrocarbon (THC), n-alkanes, branched alkanes, saturated cycloalkanes, aromatics, aldehydes, ketones, hopanes, steranes, and soluble organic fraction (SOF). Brake-specific emissions are reported for four configurations, including engine-out, DOC+CuZ-SCR+AMOX, V-SCR+AMOX, and DOC+DPF+CuZ-SCR+AMOX, and conversion of engine-out emissions is reported for the three aftertreatment configurations. Mechanisms responsible for the reduction of organic species are discussed in detail. This summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s Motor Vehicle Emissions Simulator (MOVES2014a) model.

Implications: Anthropogenic emissions are a source of significant human health and environmental risk. This study, focused on the treatment of exhaust emissions from a modern nonroad diesel engine with a variety of aftertreatment configurations, examines the impact that human industrial activity can have on air pollution. In particular, we focus on the remediation of gas-phase and semivolatile organic emissions by emission reduction technologies. This detailed summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s MOVES2014a model.