絮团粘性分维数的概念及其分析模型

水处理中的絮团具有复杂的形态结构,分维数是描述这种结构的有力工具。通过分析固液体系的粘度与絮团分维数之间的关系,提出了絮团粘性分维数的新概念及粘性分维数测定的数学物理模型,并进行了实验验证。与常用的质量分维数、边界分维数、面积分维数、体积分维数、表面积分维数等相比,絮团的粘性分维数及其测定模型具有易于测量、可同时表征不同类型絮团、可定量分析絮凝产品组成等特点,从而为絮团形态结构的定性及定量研究开辟了新的途径。     

Estimation of building-related construction and demolition waste in Shanghai

One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.     

Manganese concentrations in maternal–infant blood and birth weight

Manganese (Mn) is an essential mineral nutrient in mammals. The physiological role of Mn in animal models is well documented, but little is known about the adverse effects of Mn deficiency or overexposure in humans, including pregnancy outcomes such as birth weight. We examined the relationship of the maternal and cord blood Mn levels with birth weight in a cohort of 172 mother–infant pairs born in Shanghai, China. Non-linear spline and quadratic regression models were used to test the hypothesis of an inverted U-shaped association between the Mn levels and birth weight. The median (range) levels of Mn in the maternal and cord blood were 5.38 (2.34–30.37) μg/dL and 7.66 (2.57–34.23) μg/dL, respectively. An inverted U-shaped relationship was observed between maternal Mn and birth weight after adjusting for potential confounders. The birth weight increased with Mn levels up to 4.18 μg/dL, and a slight reduction in weight was observed at higher levels. The cord blood Mn levels were not found to be associated with birth weight. Both lower and higher Mn exposures are associated with lower birth weight, which may influence important developmental parameters; the association of higher Mn levels with lower weight was weak and imprecise.     

生物滴滤塔处理氯苯废气的工艺性能

将活性污泥培养及驯化后接种于生物滴滤塔中,挂膜启动后处理模拟氯苯废气（简称氯苯废气）,考察了生物滴滤塔在挂膜启动阶段及稳定运行阶段的性能。实验结果表明：接种41 d后生物滴滤塔成功挂膜,此时氯苯去除率稳定在90%以上;生物滴滤塔稳定运行阶段,随着进气中氯苯质量浓度由303.82 mg/m³逐渐增至1 489.05 mg/m³,氯苯去除率从85.1%降至70.1%。处理氯苯废气适宜的工艺条件为：空塔停留时间超过45 s,喷淋液流量31.8 mL/min,氯苯负荷23.97~128.01 g/（m³·h）。生物滴滤塔对喷淋液的酸性环境有较好的适应性,喷淋液pH的变化对氯苯去除率无显著影响。     

石化行业的VOCs排放控制管理

概述了我国挥发性有机化合物（VOCs）的排放情况。介绍了国内外VOCs的管理现状。分析了国内石化行业VOCs排放控制管理中存在的主要问题以及污染物排放过程的类别。提出了明确定义、制定相关标准、完善分类管理体系、研究最佳的可行性控制技术等加强VOCs排放控制管理的对策和建议。     

G2京津塘高速公路万辆车流的交通事故灾害与气象综合指数的关系

通过整理G2京津塘高速公路3年(2007年3月至2010年2月)逐日逐时万辆车流的交通事故灾害和交通流量及气象要素资料,并将万辆车流的交通事故灾害(交通事故灾害与交通流量之商)与同步气象综合指数进行日变化相关分析;结果表明:平均万辆车流的交通事故灾害的日变化最高峰出现在05时,年平均高峰值高达2.34起·辆-1·10-4;年度、春季、夏季、秋季和冬季的平均万辆车流的交通事故灾害与同步气象综合指数均呈正抛物线的偏右侧相关,即万辆车流的交通事故灾害随气象综合指数的加大而增多;统计学检验(R＞Rα=0.01和F＞Fa=0.01)效果很好.四个季节的万辆车流的交通事故灾害与气象综合指数相关的系数高达0.7781～0.8537.为了更好地将自动气象监测信息服务于高速公路交通安全,在分析成果的基础上设计出了高速公路万辆车流的交通事故灾害的气象综合指数风险等级指标,以期为高速公路交通安全提供客观的科学依据.     

基于相对资源承载力的青岛市主体功能区区划

本文根据相对资源承载力研究方法,以全国作为参照区域计算了2005～2008年青岛市主要辖区相对自然资源承载力、相对经济资源承载力和综合承载力.分析结果表明:①对于相对自然资源承载力而言,平度市处于富余状态;莱西市处于临界状态;胶州市、即墨市、胶南市处于超载状态:青岛市市区则处于严重超载状态.相对自然资源承载力序列(由富余到超载):平度市>莱西市>胶州市>胶南市>即墨市>市区.②青岛市各辖区相对经济资源承载力全部处于富余状态,其中市区的相对经济资源承载能力最大.相对经济资源承载力序列(由富余到超载):市区>胶州市>胶南市>即墨市>藁西市>平度市.③青岛市各主要辖区综合承载力全部处于富余状态,且基本保持稳定.综合承载力序列(由大到小):市区>平度市>即墨市>胶州市>胶南市>莱西市.在此基础上.本文对青岛市2005-2008期间主要辖区的主体功能区进行了区划,结果显示青岛市所辖6市区均属于优化开发区,在"十二五"期间.产业调整与优化仍是区域可持续发展的重中之重.     

Effect of lipids on sorption/desorption hysteresis in natural organic matter

The chemical composition and physical conformation of natural organic matter (NOM) play a major role in regulating its capacity to retain hydrophobic organic compounds. Naphthalene and phenanthrene were used to study the correlations between sorption/desorption isotherm nonlinearity and compositional data obtained from quantitative ¹³C solid-state DPMAS NMR spectroscopy for soil and peat organic matter with or without lipids. Sorption experiments were conducted using a batch equilibration method. Desorption experiments were carried out immediately following the sorption experiments by three successive decant-refill cycles. Hysteresis was observed in all samples. Nonlinear sorption behavior was increased by removal of lipids from the NOM. The hysteresis index, obtained from the ratio of the Freundlich exponents (N values) for the desorption and sorption isotherms, was lower in the lipid-extracted NOM samples than in the same samples without lipid extraction. The relationship between the extent of hysteresis and the characteristics of the ¹³C DPMAS NMR spectra indicates that altering NOM composition through lipid extraction not only increased the proportion of aromatic-C content, but also increased sorption/desorption hysteresis. Our data also suggest that the hysteresis index is negatively related to aromaticity.     

ZnO/LixNi1-xO光催化降解甲基橙的研究

采用溶胶凝胶法制备LixNi1-xO和ZnO粉体,利用球磨法制备ZnO/LixNi1-xO复合粉体,以紫外光为光源,通过降解甲基橙,研究了锂掺杂及n-p复合对氧化镍的光催化性能影响。结果表明：当投放量为0.1 g/L,x≤0.075（摩尔分数）的锂掺杂氧化镍均比未掺杂氧化镍的光催化活性高。当锂掺杂摩尔分数为0.025,投放量为0.4 g/L时锂掺杂氧化镍的光催化活性最佳,甲基橙最高降解率达到93.1%。当ZnO/Li0.025Ni0.975O在质量比为1∶1,投放量为0.2 g/L时光催化活性最佳,甲基橙最高降解率达到98.1%。     

Experimental thermal storage research of organic binary phase change materials in building environment

This paper aims to reveal the heat transfer mechanism of low-temperature phase change material (PCM) and design PCM heat storage device in building heating environment. Firstly, low-temperature binary PCMs of lauric acid and stearic acid are prepared, and their thermal properties are investigated by DSC. Then, shell and tube latent heat thermal energy storage units are conducted, and heat transfer experiments are carried out to analyze the heat transfer mechanism of PCM. The results demonstrate that natural convection plays an important role in heat transfer process, and the heat storage efficiency of PCMs can be significantly enhanced by increasing the fin width and improving the inlet heat transfer fluid (HTF) temperature. Furthermore, some proposals are put forward to guide the design of PCM storage device in building heating environment.