Ammonia in the atmosphere: a review on emission sources, atmospheric chemistry and deposition on terrestrial bodies

Gaseous ammonia (NH₃) is the most abundant alkaline gas in the atmosphere. In addition, it is a major component of total reactive nitrogen. The largest source of NH₃ emissions is agriculture, including animal husbandry and NH₃-based fertilizer applications. Other sources of NH₃ include industrial processes, vehicular emissions and volatilization from soils and oceans. Recent studies have indicated that NH₃ emissions have been increasing over the last few decades on a global scale. This is a concern because NH₃ plays a significant role in the formation of atmospheric particulate matter, visibility degradation and atmospheric deposition of nitrogen to sensitive ecosystems. Thus, the increase in NH₃ emissions negatively influences environmental and public health as well as climate change. For these reasons, it is important to have a clear understanding of the sources, deposition and atmospheric behaviour of NH₃. Over the last two decades, a number of research papers have addressed pertinent issues related to NH₃ emissions into the atmosphere at global, regional and local scales. This review article integrates the knowledge available on atmospheric NH₃ from the literature in a systematic manner, describes the environmental implications of unabated NH₃ emissions and provides a scientific basis for developing effective control strategies for NH₃.     

Organ-wise accumulation of fluoride in Prosopis juliflora and its potential for phytoremediation of fluoride contaminated soil

Fluoride (F) contamination is a global environmental problem, as there is no cure of fluorosis available yet. Prosopis juliflora is a leguminous perennial, phreatophyte tree, widely distributed in arid and semi-arid regions of world. It extensively grows in F endemic areas of Rajasthan (India) and has been known as a “green” solution to decontaminate cadmium, chromium and copper contaminated soils. This study aims to check the tolerance potential of P. juliflora to accumulate fluoride. For this work, P. juliflora seedlings were grown for 75 d on soilrite under five different concentrations of F viz., control, 25, 50, 75 and 100 mg NaF kg⁻¹. Organ-wise accumulation of F, bioaccumulation factor (BF), translocation factor (TF), growth ratio (GR) and F tolerance index (TI) were examined. Plant accumulated high amounts of F in roots. The organ-wise distribution showed an accumulation 4.41 mg kg⁻¹dw, 12.97 mg kg⁻¹dw and 16.75 mg kg⁻¹dw F, in stem, leaves and roots respectively. The results indicated significant translocation of F from root into aerial parts. The bioaccumulation and translocation factor values (>1.0) showed high accumulation efficiency and tolerance of P. juliflora to F. It is concluded that P. juliflora is a suitable candidate for phytoremediation purpose and can be explored further for the decontamination of F polluted soils.     

Kinetics of the oxidation of sucralose and related carbohydrates by ferrate(VI)

The kinetics of the oxidation of sucralose, an emerging contaminant, and related monosaccharides and disaccharides by ferrate(VI) (Fe(VI)) were studied as a function of pH (6.5-10.1) at 25°C. Reducing sugars (glucose, fructose, and maltose) reacted faster with Fe(VI) than did the non-reducing sugar sucrose or its chlorinated derivative, sucralose. Second-order rate constants of the reactions of Fe(VI) with sucralose and disaccharides decreased with an increase in pH. The pH dependence was modeled by considering the reactivity of species of Fe(VI), (HFeO(4)(-) and FeO(4)(2-)) with the studied substrates. Second-order rate constants for the reaction of Fe(VI) with monosaccharides displayed an unusual variation with pH and were explained by considering the involvement of hydroxide in catalyzing the ring opening of the cyclic form of the carbohydrate at increased pH. The rate constants for the reactions of carbohydrates with Fe(VI) were compared with those for other oxidant species used in water treatment and were briefly discussed.     

Social sustainability in supply chain decisions: Indian manufacturers

The purpose of the paper is to assess the inclusion of social sustainability in the decisions of supply chain in multinational manufacturing organisations in India. Indian organisations are resorting to sustainability-based reporting for greater transparency and for creation of brand value for their organisations. There are tremendous economic upheavals and changes across the complete value chain, and thus, responsible business practices are becoming a necessity for the long-term survival of organisations. Sustainability, as a strategy, is responsible utilisation of resources and is reported through social, economic and environmental factors in an organisation. For sustainability as a strategy, there has to be a complete organisational inclusion and employee engagement through decision making at operational levels along the value chain. The research paper is an empirical study done through a survey using a structured questionnaire to collect information to evaluate decision criteria particularly for social sustainability, from the middle and top level executives in Indian manufacturing organisations. Multinational manufacturing organisations in India are trying to be more responsible because of mandated CSR policy, and thus, sustainability through social factors is getting more prominence. A multiple linear regression analysis is used to explain the correlation and inclusion of social factors on the decision-making process in the supply chain of multinational manufacturing organisations in India. This study reveals that decision making in the supply chain of multinational manufacturing organisations in India specifically in manufacturing industry is incorporating social sustainability. The study highlights that decision making involving social sustainability needs larger frameworks for organisational preference. While the study provides evidence of social sustainability-based practices in multinational manufacturing organisations in India, it does not deal with social sustainability practices. The study also has limitation as has been limited to organisations which follow sustainability practices and make disclosures through GRI framework.     

Dynamics of pesticide residues in nectar and pollen of mustard (Brassica juncea (L.) Czern.) grown in Himachal Pradesh (India)

Residues dynamics of Endosulfan (525.00 g a.i. ha(-1)), Imidacloprid seed treatment (21 g a.i. kg(-1)), Lambdacyhalothrin (75.00 g a.i. ha(-1)) and Spiromesifen (225.00 g a.i. ha(-1)) in nectar and pollen of mustard, Brassica juncea (L.) Czern. grown in Himachal Pradesh (India) were determined through bioassay (using Drosophila melanogaster Meig. as test organism) and GC (Gas chromatographic) and HPLC (High performance liquid chromatographic) methods. In general chromatographic methods were more sensitive for the determination of above given pesticides compared to bioassay method. Average recoveries in nectar samples varied between 82.85 and 88.90% by bioassay and 91.20 and 93.55% by chromatographic techniques. In pollen samples, recoveries varied between 81.44 and 86.44% by bioassay and 88.50 and 91.30% by chromatographic methods. Imidacloprid residues were neither found in nectar nor in pollen samples at the time of sampling i.e. 50% of flowering. The order of average half life of residues was: Lambdacyhalothrin (12.45 h) < Spiromesifen (19.99 h) < Endosulfan (27.49 h) for nectar and Spiromesifen (9.69 h) < Lambdacyhalothrin (12.44 h) < Endosulfan (17.84 h) for pollen samples. It was found that Imidcloprid seed treatment was practically harmless to honey bees, whereas a waiting period of 5 days must be observed on crops sprayed with these chemicals during blooms to avoid any accidental hazards to honey bees.     

Plant invasions along roads: a case study from central highlands, India

Road sides provide suitable conditions for the establishment and growth of non-native species. The phenomenon of non-native species spread through roads has further increased due to rapid anthropogenic developments. Here we intend to investigate the status of native and non-native species and how the species richness and diversity change in a perpendicular road transect across the three different road use types in the central highlands of India. Presence of 55 non-native species was recorded, of the total 71 species along the road sides. Non-native species richness significantly increased with increasing road use type. Although, the species diversity significantly decreased from road verges to the forest interior in all the road use types. Indicating the role of non-native propagule spread through the roads into the interior forest landscapes. The study gives a management implication, to restrict the non-native species spread from the road sides to the forest interior, irrespective of road use types.     

Evaluation of leaching behavior of pendimethalin in sandy loam soil

The mobility of pendimethalin in sandy loam soil was studied in soil columns under laboratory conditions at two application rates, 1.0 and 2.0 kg a.i. ha^???1, with simulated rainfall of 300 mm. The maximum concentration of the herbicide was found in the top 10 cm layer, though it was found distributed in soil at all the depths at both the doses.     

Coal fly ash utilization: low temperature sintering of wall tiles

We present here a study of the sintering of fly ash and its mixture with low alkali pyrophyllite in the presence of sodium hexa meta phosphate (SHMP), a complex activator of sintering, for the purpose of wall tile manufacturing. The sintering of fly ash with SHMP in the temperature range 925-1050 degrees C produces tiles with low impact strength; however, the incremental addition of low alkali pyrophyllite improves impact strength. The impact strength of composites with 40% (w/w) pyrophyllite in the fly ash-pyrophyllite mix satisfies the acceptable limit (19.6J/m) set by the Indian Standards Institute for wall tiles. Increasing the pyrophyllite content results in an increase in the apparent density of tiles, while shrinkage and water absorption decrease. The strength of fly ash tiles is attributed to the formation of a silicophosphate phase; in pyrophyllite rich tiles, it is attributed to the formation of a tridymite-structured T-AlPO(4) phase. Scanning electron micrographs show that the reinforcing rod shaped T-AlPO(4) crystals become more prominent as the pyrophyllite content increases in the sintered tiles.     

Decadal emission estimates of carbon dioxide,sulfur dioxide,and nitric oxide emissions from coal burning in electric power generation plants in India

This study aims to estimate the emissions of carbon dioxide (CO₂), sulfur dioxide (SO₂), and nitric oxide (NO) for coal combustion in thermal power plants in India using plant-specific emission factors during the period of 2001/02 to 2009/10. The mass emission factors have been theoretically calculated using the basic principles of combustion under representative prevailing operating conditions in the plants and fuel composition. The results show that from 2001/02 to 2009/10 period, total CO₂ emissions have increased from 324 to 499 Mt/year; SO₂ emissions have increased from 2,519 to 3,840 kt/year; and NO emissions have increased from 948 to 1,539 kt/year from the Indian coal-fired power plants. National average emissions per unit of electricity from the power plants do not show a noticeable improvement during this period. Emission efficiencies for new plants that use improved technology are found to be better than those of old plants. As per these estimates, the national average of CO₂ emissions per unit of electricity varies between 0.91 and 0.95 kg/kWh while SO₂ and NO emissions vary in the range of 6.9 to 7.3 and 2.8 to 2.9 g/kWh, respectively. Yamunagar plant in Haryana state showed the highest emission efficiencies with CO₂ emissions as 0.58 kg/kWh, SO₂ emissions as 3.87 g/kWh, and NO emissions as 1.78 g/kWh, while the Faridabad plant has the lowest emission efficiencies with CO₂ emissions as 1.5 kg/kWh, SO₂ emissions as 10.56 g/kWh, and NO emissions as 4.85 g/kWh. Emission values at other plants vary between the values of these two plants.     

Atmospheric aerosols at a regional background Himalayan site—Mukteshwar, India

Continuous aerosol measurements were made at a regional background station (Mukteshwar) located in a rural Himalayan mountain terrain from December 2005 to December 2008 for a period of 3 years. The average concentrations of particulate matter less than or equal to 10 μm (PM₁₀), particulate matter less than or equal to 2.5 μm (PM_2.5) and black carbon (BC) are 46.0, 26.6 and 0.85 μg/m³ during the study period. Majority of the PM₁₀ values lie below 100 μg/m³ while majority of the PM_2.5 values lie below 30 μg/m³. It is further seen that during the monsoon months, especially July and August, the average values are comparatively low. It is also noted that the PM_2.5/PM₁₀ ratios between 0.50 and 0.75 have the maximum frequency distribution in the data set. Furthermore, the monthly mean ratio of BC to PM_2.5 mass lies between 3.0 and 7.5 % during the study period. Though the average PM₁₀ and PM_2.5 concentrations during the study period are less than the respective Indian ambient air quality standards, however, they are still above the WHO guidelines and would have adverse health impacts. This shows that even in rural/background regions that are far away from major pollution sources or urban areas, the aerosol concentrations are significant and require long-term monitoring, source quantification and aerosol model simulations.