Flowrate targeting for threshold problems and plant-wide integration for water network synthesis

Water reuse/recycle has gained much attention in recent years for environmental sustainability reasons, as well as the rising costs of fresh water and effluent treatment. Process integration techniques for the synthesis of water network have been widely accepted as a promising tool to reduce fresh water and wastewater flowrates via in-plant water reuse/recycle. To date, the focus in this area has been on water network synthesis problems, with little attention dedicated to the rare but realistic cases of so-called threshold problems. In this work, targeting for threshold problems in a water network is addressed using the recently developed numerical tool of water cascade analysis (WCA). Targeting for plant-wide integration is then addressed. By sending water sources across different geographical zones in plant-wide integration, the overall fresh water and wastewater flowrates are reduced simultaneously.     

Characterization of subsoil heterogeneity, estimation of grain size distribution and hydraulic conductivity at the Krauthausen test site using Cone Penetration Test

A Cone Penetration Test (CPT) survey with a high spatial resolution was performed in order to investigate the stratigraphy as well as the spatial variability of various soil properties of the Krauthausen test site. Analyses of the CPT measurements showed the subsurface to be dominated by a planar layered structure. Variogram analysis of the various CPT parameters disclosed that within each layer the soil properties have an anisotropic spatial correlation structure. A correlation analysis of the measured CPT data and co-located grain size distributions from soil samples was performed. Since the correlation coefficients were greater equal to 0.7, a reliable empirical relationship between the data sets could be developed. Based on this empirical relationship grain size distributions were estimated at CPT locations. The statistical processing of estimated and measured grain size distributions with respect to their spatial correlation structure disclosed good agreement between the data sets. The estimated grain size distributions from CPT data were used to estimate the hydraulic conductivity in the aquifer. The results provide detailed information of the spatial heterogeneity of the hydraulic conductivity at Krauthausen test site. The validation of these results, using a prior investigation of hydraulic conductivity statistics, suggests the CPT a fast and inexpensive tool for the estimation of three dimensional hydraulic conductivity fields with sufficient accuracy.     

Metallakkumulation in Moosen: Standörtliche und regionale Randbedingungen des Biomonitoring von Luftverunreinigungen

Goal and Scope

Several studies show that the concentration of metals in mosses depends not only on metal deposition but also on factors such as moss species, canopy drip, precipitation, altitude, distance to the sea and the analytical technique used. However, contrasting results have been reported and the interpretation of the spatial variability of the metal accumulation in mosses remains difficult. In the presented study existing monitoring data from the European Heavy Metals in Mosses Surveys together with surface data on precipitation, elevation and land use are statistically analysed to assess factors other than emissions that have an influence on the metal accumulation in the mosses.

Main Features

Inference statistics and Spearman correlation analysis were applied to examine the association of the metal accumulation and the distance of the monitoring sites to the sea as well as the altitude. Whether or not significant differences of the metal loads in the mosses exist at national borders was examined with help of the U-test after Mann and Whitney. In order to identify and rank the factors that are assumed to have an influence on the metal uptake of the mosses Classification and Regression Trees (CART) were applied.

Results

No clear tendency could be derived from the results of the inference statistical calculations and the correlation analyses with regard to the distance of the monitoring site to the sea and the altitude. According to the results of the CART-analyses mainly the moss species, potential emission sources around the monitoring sites, canopy drip and precipitation have an effect on the metal bioaccumulation. Assuming that each participating country followed strictly the manual for sampling and sample preparation the results of the inference statistical calculations furthermore suggest that in most cases different techniques for digestion and analysis bias the measurements significantly.

Discussion

For the first time a national monitoring data base consisting of measurement data and metadata as well as surface information on precipitation, land use and elevation was applied to examine influence factors on the metal bioaccumulation in mosses. The respective results mirror existing knowledge from other national studies to a large extend, although further analyses are necessary to affirm the findings. These analyses should include data from other national monitoring programmes and should additionally be carried out with other decision tree algorithms than CART.

Conclusions

The local variability in the metal concentration in mosses can be uncovered in terms of predictors or underlying hidden causes by using CART. Ideally, such an approach should be applied across the whole of Europe. This will only be feasible if all participating countries provide additional information about site characteristics as currently is done in for example the German moss surveys.

Recommendations

The UNECE Metals in Mosses Survey experimental protocol should be improved in order to reduce the observed influences, to enhance standardisation, and to strengthen the quality control. This implies the integration of sampling site describing metadata into the assessment. Furthermore, basis research is needed to test the hypothesis concerning moss species-specific accumulation of depositions.

Perspectives

Provided that the presented results hold true in further analyses correction factors should be applied on the moss data in order to get the depicted spatial patterns and temporal trends of metal bioaccumulation unbiased. Such factors should be calculated for natural landscape units or ecoregions that are homogeneous with regard to climate, vegetation and altitude.     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

Mapping the intertidal vegetation of the harbours of southern England for water quality management

This paper discusses a research project dealing with the mapping of the intertidal vegetation of several harbours along the southern coastline of England. It describes in detail the methods used to map the vegetation and gives examples of the results from these studies. This paper then goes on to explain how these results are applied by the Environment Agency of England and Wales to improve water quality in the harbours. This type of vegetation mapping is useful in monitoring the development of the intertidal species includingSpartina, Zostera and of particular importance to this study the green algaeUlva andEnteromorpha. The work was undertaken with funding from the Environment Agency and at present has taken place over a four year period. The data collected will be used by the Environment Agency to assess macro-algae covervalues for the intertidal area of the harbours concerned. This forms part of the Agency's commitment to the EU Nitrates Directive and the Urban Waste Water Treatment Directive. Some of the species mapped act as suitable indicators of water quality and are symptoms of entrophication. Other species are of interest for nature conservation and were recorded to provide a record for longer-term trends in vegetation patterns within the harbour. This paper aims to provide readers with an understanding of the techniques involved as well as an evaluation of the methodology.     

Geese and dietary allelochemicals — food palatability and geophagy

Summary The palatability of plants was studied in young, immature and adult geese of three species,Anser anser, Anser indicus andBranta canadensis, with respect to secondary plant metabolites. In their first 1–4 weeks of life, hand-reared goslings feed on a wide variety of plants, more or less irrespective of their allelochemical contents. Older birds become more selective, but still consume plants which are normally considered to be unpalatable or even toxic for other animals. Choice experiments were performed with pure secondary metabolites which were offered on otherwise highly palatable food items, such as leaves ofTaraxacum officinale. These experiments revealed a similar trend, in that very young goslings discriminate their food much less than older goslings or adult geese. In general, food contaminated with essential oils was rejected, whereas alkaloids, glycosides, amines and sulfur compounds were tolerated to a remarkable degree. In consequence, especially young, but also adult geese must have a high capacity to tolerate and/or to detoxify dietary allelochemicals. Another detoxification mechanism became evident during the experiments: geese ingest soil and mud quite regularly. It could be shown experimentally that the respective soil had a high capacity to bind alkaloids. We assume that geophagy is a means (besides a presumed active detoxification in the liver) to adsorb and thus reduce the contents of dietary allelochemicals.     

Equipment failures and their contribution to industrial incidents and accidents in the manufacturing industry

Accidental events in manufacturing industries can be caused by many factors, including work methods, lack of training, equipment design, maintenance and reliability. This study is aimed at determining the contribution of failures of commonly used industrial equipment, such as machines, tools and material handling equipment, to the chain of causality of industrial accidents and incidents. Based on a case study which aimed at the analysis of an existing pulp and paper company's accident database, this paper examines the number, type and gravity of the failures involved in these events and their causes. Results from this study show that equipment failures had a major effect on the number and severity of accidents accounted for in the database: 272 out of 773 accidental events were related to equipment failure, where 13 of them had direct human consequences. Failures that contributed directly or indirectly to these events are analyzed.     

Exploring the potential of otolith microchemistry to enhance diet analysis in pinnipeds

Increasing the scope and accuracy of information about pinniped diets obtainable from non-invasive techniques is increasingly important, particularly in cases where pinniped species are threatened or endangered. This study is the first to explore the potential for using elemental analysis of the otoliths found in scat to enhance the information available for diet analyses. We investigated the effects of pinniped digestion on otolith microchemistry using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). We compared the elements contained in the edges (adult stage) and cores (larval/juvenile stage) of otoliths from Pacific herring (Clupea pallasii), Atka mackerel (Pleurogrammus monopterygius), and Walleye pollock (Theragra chalcogramma) recovered from the scat of captive Steller sea lions (Eumetopias jubatus) to elements in a sample of pristine (undigested) otoliths. We found that digestion had a significant effect on four of the six sampled combinations of species and otolith region (herring edges and cores, mackerel edges, and pollock cores), and that Rb most frequently showed significant differences in concentration after digestion. We could significantly discriminate among species of both pristine and digested otoliths using either otolith edges or cores with the elements Ba, Rb, Sr, Y, and Mg. When compared to previously identified digested otoliths, unknown samples of the three species of digested otoliths could be discriminated with 55–100% accuracy depending on species and otolith region. When compared to a library of previously identified pristine and digested otoliths, unknown samples of digested otoliths could be discriminated to species with 65–88% accuracy. When the group of unknown digested otoliths was compared to known pristine otoliths, discrimination ranged from 45 to 65%. These results indicate that elemental analysis could be used to supplement visual identification of otoliths from scat. However, further research is required to determine whether elemental analysis of digested otoliths could be useful for prey fish population studies.