Iteroparity in the variable environment of the salamander Ambystoma tigrinum

Simultaneous estimation of survival, reproduction, and movement is essential to understanding how species maximize lifetime reproduction in environments that vary across space and time. We conducted a four-year, capture-recapture study of three populations of eastern tiger salamanders (Ambystoma tigrinum tigrinum) and used multistate mark-recapture statistical methods to estimate the manner in which movement, survival, and breeding probabilities vary under different environmental conditions across years and among populations and habitats. We inferred how individuals may mitigate risks of mortality and reproductive failure by deferring breeding or by moving among populations. Movement probabilities among populations were extremely low despite high spatiotemporal variation in reproductive success and survival, suggesting possible costs to movements among breeding ponds. Breeding probabilities varied between wet and dry years and according to whether or not breeding was attempted in the previous year. Estimates of survival in the nonbreeding, forest habitat varied among populations but were consistent across time. Survival in breeding ponds was generally high in years with average or high precipitation, except for males in an especially ephemeral pond. A drought year incurred severe survival costs in all ponds to animals that attempted breeding. Female salamanders appear to defer these episodic survival costs of breeding by choosing not to breed in years when the risk of adult mortality is high. Using stochastic simulations of survival and breeding under historical climate conditions, we found that an interaction between breeding probabilities and mortality limits the probability of multiple breeding attempts differently between the sexes and among populations.     

Collectivism,propensity to trust and self-esteem as predictors of organizational citizenship in a non-work setting

This study examined organizational citizenship of residents in a housing cooperative setting where roles were not influenced by traditional employee–employer work relationships. Results demonstrate that the individual differences of collectivism and propensity to trust predicted organizational citizenship (assessed six months later). In addition, organizational-based self-esteem fully mediated the effects of collectivism and propensity to trust on organizational citizenship, and tenure moderated the trust—self-esteem relationship. We discuss the implications of these results given the changing nature of work and the increasing importance of non-work organizations. Copyright © 2000 John Wiley & Sons, Ltd.     

Designing and implementing an urban river remediation

In 2017, Consumers Energy completed a sediment response action in the Flint River to address manufactured gas plant‐related impacts in sediments and at the groundwater‐surface water interface. The project site is located in an urban, channelized, developed reach of the river. Multiple property owners and site constraints presented unique challenges for the remedial design, including the presence of Hamilton Dam at the downstream edge of the site which was considered a high‐hazard dam in “very poor condition.” An additional consideration was the City of Flint water crisis which was initially exposed in 2014. The sediment response action was not related to the water crisis because the site is located approximately two miles downstream of the City's water intake, but design, permitting, and construction began after 2014, so the timing added a heightened sense of awareness from the public stakeholders. The successful completion of the sediment response action was the result of deliberate planning, iterative engineering, and open communication with stakeholders that enabled a careful balancing of objectives with sometimes competing interests.     

Air concentrations of currently used herbicides and legacy compounds in the Canadian prairies,subarctic, and arctic

Passive air samplers were installed in the summers of 2005 and 2007 for 90 days at four locations in the agricultural region of the Canadian Prairies and at five locations in the Canadian Subarctic and Arctic. The presence and masses of ten currently used herbicides and three legacy compounds in the polyurethane foam disks were quantified. Herbicides 2,4-D, bromoxynil and MCPA were detected at all locations in the Canadian Prairies and in both years because these herbicides are widely applied to control broadleaf weeds in cereal crops that are an integral part of Prairie agricultural production systems. MCPA was also detected at one location in the Arctic in 2007. The detection of the other seven herbicides in the 2 years combined ranged from no detections (atrazine only) to five detections for the relatively volatile herbicides trifluralin and triallate. Triallate was the only other herbicide detected in the Arctic (2005). Legacy compounds were either not detected (alachlor) or at levels near their detection level (γ-HCH and α-HCH). γ-HCH and α-HCH were more frequently detected in 2005 than in 2007 indicating that their concentrations in Canadian air have decreased over time. γ-HCH, widely used as an insecticide in Prairie oilseed production until 2002, was detected at larger concentrations in the Canadian Prairies than in the Subarctic and Arctic. α-HCH, a manufacturing by-product in technical HCH prior to 1971 in Canada, was not detected in the Canadian Prairies but was at detectable levels in the Subarctic and Arctic as the Arctic Ocean is reported to be a major source of α-HCH to the atmosphere. We conclude that some of the most widely used herbicides in Canadian agriculture today are commonly present in the air in regions where they are applied and that a portion of these herbicides may be traveling as parent molecules to the Canadian Arctic. To the authors’ knowledge, this is the first evidence of the presence of MCPA and triallate in Arctic air samples, perhaps because previous research has seldomly monitored for currently used herbicides in this region.     

Evaluation of a Test Method for Measuring Indoor Air Emissions from Dry-Process Photocopiers

ABSTRACT

A large chamber test method for measuring indoor air emissions from office equipment was developed, evaluated, and revised based on the initial testing of four dry-process photocopiers. Because all chambers may not necessarily produce similar results (e.g., due to differences in sink effects, temperature and humidity control, air exchange, pollutant monitoring, and measurement biases), a preliminary four-laboratory evaluation of the revised test method was conducted. To minimize variability, the evaluation used a single dry-process photocopier that was shipped to each of the four laboratories along with supplies (i.e., toner and paper).

The results of this preliminary four-laboratory evaluation demonstrate that the test method was used successfully in the different chambers to measure emissions from dry-process photocopiers. Differences in chamber design and construction appeared to have had minimal effect on the results for the volatile organic compounds (VOCs). Perhaps more important than the chamber itself is the sample analysis as identified by duplicate samples that were analyzed by a different laboratory. Percent relative standard deviation (%RSD) was used to provide a simplistic view of interlaboratory precision for this evaluation. Excluding problems with suspected analytical bias observed from one of the laboratories, the precision was excellent for the VOCs with RSDs of less than 10% in most cases. Less precision was observed among the laboratories for aldehydes/ketones (RSD of 23.2% for formaldehyde). The precision for ozone emission rates among three of the laboratories was excellent (RSD of 7.9%), but emission rates measured at the fourth laboratory were much higher.     

Uncertainty analysis using a fugacity-based multimedia mass-balance model: Application of the updated EQC model to decamethylcyclopentasiloxane (D5)

The EQuilibrium Criterion (EQC) model developed and published in 1996 was recently revised to include improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis. This New EQC model was used to evaluate the multimedia, fugacity-based fate of decamethylcyclopentasiloxane (D5; CAS No. 541-02-6) in the environment over a temperature range of 1–25 °C. In addition, Monte Carlo uncertainty analysis was used to quantitatively determine the influence of temperature and input partitioning and reactivity data on the behavior of D5 under various emission scenarios. Results indicated that emission mode was the most influential factor determining the fate and distribution of D5 in the model environment. When emitted to air and soil, D5 partitioned to and remained in the air compartment where rates of removal from degradation and advection processes were relatively rapid. In contrast, D5 emitted to water resulted in a substantial mass fraction of D5 being accumulated in the sediment compartment, where rates of removal from degradation and advection processes were slow. The mass distributions and fate of D5 in the model environment were strongly influenced by multiple input parameters, including temperature, the mode of emission (especially emission rate to water), K_OC and half-life in air. As temperature decreased from 25 °C to 1 °C, K_OC and half-life in air became increasingly more influential such that the mass distribution of D5 increased in air and decreased in sediment, resulting in decreased overall persistence.     

Influence of usage and chemical–physical properties on the atmospheric transport and deposition of pesticides to agricultural regions of Manitoba,Canada

This study quantified the masses of 14 pesticides deposited as wet (precipitation) versus dry (gaseous and particle) atmospheric deposition at a research farm in southwestern Manitoba, Canada. The concentration in air of these pesticides was also measured. Total bulk deposition amounts (wet + dry) ranged from 0.009 to 2.3 μg m^?2 for the 12 pesticides detected, and for the six pesticides with both wet and dry deposition detections, dry deposition contributed 12–51% of the total deposition over the crop growing season. Although not applied at the site, eight herbicides registered for use in Canada, as well as lindane (γ-HCH), were all frequently detected (92–100%) in the 12 air samples analyzed during the crop growing season, with by-product isomer α-HCH (75%), clopyralid (50%) and atrazine (8%) detected to a lesser extent. The chemical’s physicochemical properties and the relative mean mass of each agricultural pesticide applied in the province of Manitoba and in a 13 km radius were significant parameters in explaining the trends in the concentrations of pesticides detected in our samples. The important contribution of dry deposition to total pesticide deposition warrants greater attention in arid and semi-arid areas such as the Prairie Region of Canada, also because under a changing climate this region is estimated to experience more severe droughts while the more favorable conditions predicted for pest infestations could lead to increased pesticide applications in agricultural and urban areas.     

An updated state of the science EQC model for evaluating chemical fate in the environment: application to D5 (decamethylcyclopentasiloxane)

The EQuilibrium Criterion (EQC) model developed and published in 1996 has been widely used for screening level evaluations of the multimedia, fugacity-based environmental fate of organic chemicals for educational, industrial, and regulatory purposes. Advances in the science of chemical partitioning and reactivity and the need for more rigorous regulatory evaluations have resulted in a need to update the model. The New EQC model is described which includes an improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis but uses the same multi-level approach, equations and environmental parameters as in the original version. A narrative output is also produced. The New EQC model, which uses a Microsoft Excel platform, is described and applied in detail to decamethylcyclopentasiloxane (D5; CAS No. 541-02-6). The implications of these results for the more detailed exposure and risk assessment of D5 are discussed. The need for rigorous evaluation and documentation of the input parameters is outlined.     

Effects of biodegradation and sorption by humic acid on the estrogenicity of 17β-estradiol

The removal of 17β-estradiol (E2) by biodegradation and sorption onto humic acid (HA) was examined at various HA concentrations. Subsequently, estrogenicity associated with E2 removal was estimated using E-screen bioassay. Results showed that E2 biodegradation and its subsequent transformation to estrone (E1) were significantly reduced with increasing HA concentration. In addition, the presence of nutrients enhanced the biodegradation of E2. Overall, E2 biodegradation was the dominating contributor to its removal, which demonstrated a significantly negative correlation with E2 sorption at various HA concentrations. The sorption of E2 by HA was significantly enhanced with increasing HA concentration. Estrogenicity associated with residual E2 showed that there existed a significant difference among various HA concentrations, with the lowest value in the absence of HA. The findings suggest that the presence of HA and nutrients in natural waters should be considered in assessing estrogenicity of environmental samples due to complex sorption and biodegradation processes.