Calculation and use of selectivity coefficients of feeding: Zooplankton grazing

A straightforward method for calculating selectivity coefficients (W_ij) of predation from raw data, mortality rates of prey, filtering rates, feeding rates and electivity indices is derived. Results from a comparison of selectivity coefficients for the copepod Diaptomus oregonensis grazing under a number of experimental conditions suggest that W_ij's for size-selective feeding are invariant, a conclusion also supported by the leaky-sieve model. Recommendations are made on how to use W_ij's in linear and nonlinear feeding constructs for zooplankton and other animals.     

Groundwater quality surrounding Lake Texoma during short-term drought conditions

Water quality data from 55 monitoring wells during drought conditions surrounding Lake Texoma, located on the border of Oklahoma and Texas, was compared to assess the influence of drought on groundwater quality. During the drought month of October, water table levels were three feet (0.9 m) lower compared with several months earlier under predrought climate conditions. Detection frequencies of nitrate (> 0.1 mg/l), orthophosphates (> 0.1 mg/l), chlorides (> MCL), and sulfates (> MCL) all increased during drought. Orthophosphate level was higher during drought. Largest increases in concentration were nitrate under both agriculture lands and in septic tank areas. An increase in ammonium-nitrogen was only detected in the septic tank area. The study showed that stressors such as nitrate and total salts could potentially become a health or environmental problem during drought.     

Estimating the benefits and costs to mountain bikers of changes in trail characteristics,access fees,and site closures: choice experiments and benefits transfer

Mountain biking is an increasingly popular leisure pursuit. Consequences are trail degradation and conflicts with hikers and other users. Resource managers often attempt to resolve these problems by closing trails to mountain biking. In order to estimate the impact of these developments, a model has been devised that predicts the effects of changes in trail characteristics and introduction of access fees, and correlates these with biker preference on trail selection. It estimates each individual's per-ride consumer's surplus associated with implementing different policies. The surplus varies significantly as a function of each individual's gender, budget, and interest in mountain biking. Estimation uses stated preference data, specifically choice experiments. Hypothetical mountain bike trails were created and each surveyed biker was asked to make five pair-wise choices. A benefit-transfer simulation is used to show how the model and parameter estimates can be transferred to estimate the benefits and costs to mountain bikers in a specific area.     

Insect pest management in forest ecosystems

Environmental Management - Understanding the role of insects in forest ecosystems is vital to the development of environmentally and economically sound pest management strategies in forestry Most...     

Taxation of uranium mining ventures in Saskatchewan: A policy assessment

The basic objective of this paper is to present a policy assessment of the Saskatchewan Uranium Royalty (SUR). This scheme, as enacted on 1 August 1976, was designed to be an integral part of the province's rent appropriation and economic development strategy. Before the tax regime is addressed directly an overview is given of the resource policy environment within which the impost was developed.     

WATER QUALITY MODEL CALIBRATION: A COMPARISON OF INPUT AND OUTPUT ERROR CRITERIA1

ABSTRACT: A common framework for the analysis of water resources systems is the input-parameter-output representation. The system, described by its parameters, is driven by inputs and responds with outputs. To calibrate (estimate the parameters) models of these systems requires data on both inputs and outputs, both of which are subject to random errors. When one is uncertain as to whether the predominant source of error is associated with inputs or outputs, uncertainty also exists as to the correct specification of a calibration criterion. This paper develops and analyzes two alternative least squares criteria for calibrating a numerical water quality model. The first criterion assumes that errors are associated with inputs while the second assumes output errors. Statistical properties of the resulting estimators are examined under conditions of pure input or output error and mixed error conditions from a theoretical perspective and then using simulated results from a series of Monte Carlo experiments.     

AN INDEX OF STORED FINE SEDIMENT IN GRAVEL BEDDED STREAMS1

An index of sediments less than 0.3 mm stored in the top layer of small streams was estimated by disturbing a fixed area for 2 minutes and catching the resultant sediment drift in downstream traps. The method was used in 24 small northern California streams and was tested by releasing known amounts and sizes of sediments in controlled trails. Field use showed general agreement with an exponential model of decrease in sediment trapped vs. distance. Sites in distrubed reaches (watersheds logged with no streamside buffers or with buffers less than 30 m) had higher indices of stored sediment than control sites. Estimates from controlled trials averaged 7.5 percent higher than actual losses for composite size classes ≤ 0.3 mm, 19.7 percent higher than actual losses for just the ≤ 0.125 mm class, and 15.2 percent for all 14 trials. The method is relatively simple and suitable for remote locations, particularly in studies comparing many small streams.     

EVALUATING THE INFLUENCE OF SOURCE BASINS ON DOWNSTREAM WATER QUALITY IN THE MISSISSIPPI RIVER1

ABSTRACT: Chemical variability in the Mississippi River during water years 1989 to 1998 was evaluated using stream discharge and water‐quality data in conjunction with the DAFLOW/BLTM hydraulic model. Model simulations were used to identify subbasin contributions of water and chemical constituents to the Mississippi River upstream from its confluence with the Ohio and the Mississippi River and at the Atchafalaya Diversion in Louisiana. Concentrations of dissolved solids, sodium, and sulfate at the Thebes site showed a general decreasing trend, and concentrations of silica and nitrate showed a general increasing trend as the percentage of discharge from the Mississippi River upstream from Grafton increased. Concentrations of most chemical constituents in the Mississippi River at the Atchafalaya Diversion exhibited a decreasing trend as the percentage of water from the Ohio River increased. Regression models were used to evaluate the importance of the source of water to the water chemistry in the Mississippi River at Thebes and the Atchafalaya Diversion. The addition of terms in regression equations to account for the percent of water from sub‐basins improved coefficients of determination for predicting chemical concentrations by as much as nine percent at the Thebes site and by as much as 48 percent at the Atchafalaya Diversion site. The addition of source‐water terms to regression equations increased the estimated annual loads of nitrate and silica delivered from the Mississippi River Basin to the Gulf of Mexico by as much as 14 and 13 percent, respectively.     

Fabric filters versus electrostatic precipitators

Control of particulate emissions from pulverized coal fired steam generators is becoming a significant factor in the siting and public acceptability of large coal burning power plants. The particulate emission limit established by the EPA for new coal fired boilers is 0.03 lb/10⁶ Btu (13 ng/J) Possibly more restrictive than this is the state of New Mexico's particulate regulation which calls for no more than 0.05 lb/10⁶ Btu (22 ng/J) total, and no more than 0.02 lb/10⁶ Btu (9 ng/J) less than 2 microns in diameter. This paper will evaluate the effect of these stringent limitations on the technical feasibility and economics of dry particulate removal. Electrostatic precipitators have been the dominant particulate collection device in the electric utility industry for many years because of their low capital and operating cost. However, increasingly stringent emission standards have led to substantially higher costs for precipitators. These costs have increased sufficiently for fabric filtration to become a competitive alternative in achieving cost effective control. This paper will compare the economics and performance of fabric filtration with respect to conventional electrostatic precipitators. The paper will also address the preliminary evaluation procedures that should be followed in order to select the appropriate device for new or existing coal-fired boilers.     

PCN BASED METAL PARTITIONING IN URBAN SNOWMELT,RAINFALL/RUNOFF,AND RIVER FLOW SYSTEMS1

ABSTRACT: Drawing an analogy between the popular Soil Conservation Service curve number (SCS‐CN) method based infiltration and metal sorption processes, a new partitioning curve number (PCN) approach is suggested for partitioning of heavy metals into dissolved and particulate bound forms in urban snowmelt, rainfall/runoff, and river flow environments. The parameters, the potential maximum desorption, ψ, and the PCN analogous to the SCS‐CN parameters S and CN, respectively, are introduced. Under the condition of snowmelt, PCN (or ψ) is found to generally rely on temperature, relative humidity, pH, and chloride content; during a rainstorm, ψ is found to depend on the alkalinity and the pH of the rainwater; and in the river flow situation, PCN is found to generally depend on the temperature, pH, and chloride content. The advantage of using PCN instead of the widely used partitioning parameter, K_d, is found to lie in the PCN's efficacy to distinguish the adsorption (or sorption) behavior of metals in the above snowmelt, rainfall/runoff, and river flow situations, analogous to the hydrological behavior of watersheds.