我国典型钢铁行业主要工艺环节排放颗粒物源成分谱特征

鉴于我国钢铁行业排放颗粒物源成分谱数量不足,有待更新的现状,致力于服务精细化颗粒物源解析的需求,采用稀释通道系统对武汉市某钢铁公司的3个主要工艺环节(烧结、炼钢、炼铁)排放源进行了采样.构建了3类PM_(2.5)源成分谱及3类PM_(10)成分谱,对源谱主要化学组分特征进行了研究,并与国内其他区域已有的钢铁行业源谱研究进行了对比.结果表明:(1)烧结工艺源成分谱中,SO_4~(2-)、Al和NH_4~+等含量高,PM_(2.5)源谱中质量分数依次为22. 2%、4. 5%和3. 5%,PM_(10)源谱中依次为36. 0%、5. 2%和2. 7%,炼铁工艺Fe元素含量最高,在PM_(2.5)源谱和PM_(10)源谱中分别达到28. 3%和24. 5%,炼钢工艺源谱Ca、Fe元素等为主要组分;(2)元素组分中,烧结工艺S元素含量最高,地壳元素在PM_(10)源谱中含量更高,炼铁工艺Pb、Cr等重金属含量偏高,炼钢工艺Cr富集;(3)源谱之间分歧系数的计算显示,同类工艺粗细粒径源谱相似性偏高,烧结工艺与其他两类工艺源谱之间差异性较高,炼钢工艺与炼铁工艺差异性较低.同国内其他区域研究源谱相比,发现Fe、Si和Ca等为钢铁行业排放颗粒物中标识性组分,而碳组分和SO_4~(2-)等组分特征随生产方式、除污设备等不同表现出不同特征.     

2006年～2012年内蒙古自治区新建火电项目NOX排放情况及其减排形势分析

通过统计2006年至2012年内蒙古自治区内新建火力发电项目NOX治理和排放情况,并结合目前火电厂主流脱硝技术以及国家和自治区对NOX减排的相关要求,对自治区“十二五”期间NOX减排形势进行分析.     

烟台市环境受体PM2.5四季污染特征与来源解析

于2016～2017年四季在烟台市3个点位采集了PM_(2.5)样品,分析了其质量浓度和化学组分特征.利用CMB模型对受体进行解析,并利用后向轨迹和PSCF对传输气流和潜在源区进行了分析.结果表明,烟台市监测点位冬季、春季、夏季和秋季的PM_(2.5)平均质量浓度分别为(89. 45±56. 80)、(76. 78±28. 44)、(32. 65±17. 92)和(57. 32±24. 60)μg·m~(-3). PM_(2.5)浓度表现出明显的季节变化特征(P 0. 01).全年PM_(2.5)各源类分担率大小依次为:二次硝酸盐源(20. 3%)城市扬尘源(15. 7%)机动车排放源(14. 9%)燃煤源(13. 8%)二次硫酸盐源(12. 8%) SOC(6. 1%)建筑水泥尘源(5. 5%)海盐源(2. 9%),可以看到烟台市以二次源、扬尘、机动车排放源和燃煤源为主要污染源.春季硝酸盐源和城市扬尘源是重要贡献源类,夏季硫酸盐源贡献突出,燃煤源在秋冬季占比突出.烟台市气流输送和潜在源区也呈现出明显的季节变化:冬季主要受烟台市短距离输送的影响;夏季主要受烟台东部沿海和本地的影响;春秋季主要受山东东北部和东部沿海地区的区域传输和烟台市本地源的影响.     

大气痕量挥发性有机物碳同位素分析研究进展

对于大气痕量挥发性有机物的研究,浓度测量方法在满足科学研究的要求方面尚有欠缺,相比之下,同位素测量方法具有测量精度高、对源解析准确和测量误差小的特点且发展迅速,该方法在大气痕量挥发性有机物的研究中所起到的作用日益显著;但由于同位素测量技术对大气样品质量的要求很高,故目前该方法在大气环境科学的研究领域中还不能普及,今后随...     

光腔衰荡光谱(CRDS)法观测我国4个本底站大气CO2

利用基于光腔衰荡光谱(CRDS)技术自组装的大气CO2在线观测系统,于2009年在青海瓦里关、浙江临安、北京上甸子和黑龙江龙风山4个世界气象组织全球大气观测网(WMO/GAW)大气本底站对大气CO2进行了在线观测.初步分析结果表明,4站全年大气CO2体积分数最低值出现在7～8月,夏季临安、龙风山和上甸子站CO2平均体积...     

装甲钢自然环境试验与人工加速试验的相关性

对某型装甲钢在酸雨大气环境下自然暴露与人工模拟加速试验的相关性进行了研究。利用腐蚀机理对比、Spearman秩相关系数、灰色关联度、加速转换因子等方法进行了相关性的定性定量评价。评价结果表明模拟加速试验与自然环境暴露试验有较好相关性。     

Rhizosphere effect of different aquatic plants on phosphorus depletion

A series of pot experiments with Alternanthera philoxeroides, Typha latifolia, Sagittaria sagittifolia and Phragmites communis were conducted to assess the phosphorus depletion effect in the rhizosphere. The ratio of root to shoot, root morphology, phosphorus uptake efficiency and phosphorus utilization efficiency were analyzed. An obvious variation in phosphorus concentrations between the rhizosphere soil and non-rhizosphere soil was observed. The water-soluble P contents in the rhizosphere soil of A. philoxeroides, T. latifolia, S. sagittifolia and P. communis were reduced by 81%, 42%, 18% and 16%, respectively, compared with that in the non-rhizosphere soil. A. philoxeroides had the highest phosphorus uptake efficiency (1.32 mg/m), while T. latifolia achieved the effective phosphorus depletion by the strong rooting system and the high phosphorus uptake efficiency (0.52 mg/m). T. latifolia not only used phosphorus to produce biomass economically, but also adjusted carbon allocation to the roots to explore the soil for more available phosphorus. A. philoxeroides and T. latifolia were more effective in depleting phosphorus in the rhizosphere than S. sagittifolia and P. communis.     

天津市城市扬尘及土壤尘单颗粒质谱特征

为探究城市扬尘及不同类型的土壤尘单颗粒质谱特征,使用SPAMS（单颗粒气溶胶质谱仪）对天津城市扬尘及不同类型土壤尘（菜地、果园、林地、农田）进行分析.结果表明:天津城市扬尘粒径在0.5~1.0 μm之间的占比较高;4种土壤尘在不同粒径段的分布略有差异,整体而言小粒径段（0.2~1.0 μm）占比低于大粒径段（1.0~2.0 μm）,说明土壤尘更易分布在大粒径段.在小粒径段,天津城市扬尘颗粒含有更多的碳组分及硫酸盐,大粒径段含有较多的金属、氯、硝酸盐、磷酸盐及硅酸盐组分.与城市扬尘相比,土壤尘中23Na+、46NO₂-峰强显著降低,39K+、35Cl-、42CNO-峰强增高,通过其峰强比值分布可将城市扬尘与土壤尘明显区分.与城市扬尘相比,土壤尘中含碳颗粒显著减少,同时出现钾类颗粒.城市扬尘作为一种混合源,含碳颗粒可能受多种排放源（机动车、燃煤等）影响,而土壤尘中钾类颗粒可能与农作物施肥有关.两种源类含27Al+、26CN-、35Cl-、42CNO-、46NO₂-、76SiO₃-、79PO₃-的颗粒占比均高于50%,其中40Ca+、46NO₂-和62NO₃-颗粒在天津城市扬尘中占比更高,76SiO₃-颗粒在土壤尘中占比更高,表明天津城市扬尘中更多的颗粒含有钙和硝酸盐组分,土壤尘中含硅酸盐颗粒较多.与机动车尾气、生物质燃烧等排放的颗粒物相比,天津城市扬尘及土壤尘中含97HSO₄-颗粒占比较低,表明天津城市扬尘及土壤尘颗粒中含有更少的硫酸盐,可作为将天津城市扬尘、土壤尘与其他源类区分的指标.      

Catalytic activities and mechanism of formaldehyde oxidation over gold supported on MnO<Subscript>2</Subscript> microsphere catalysts at room temperature

MnO₂ microspheres with various surface structures were prepared using the hydrothermal method, and Au/MnO₂ catalysts were synthesized using the sol-gel method. We obtained three MnO₂ microspheres and Au/MnO₂ samples: coherent solid spheres covered with wire-like nanostructures, solid spheres with nanosheets, and hierarchical hollow microspheres with nanoplatelets and nanorods. We investigated the properties and catalytic activities of formaldehyde oxidation at room temperature. Crystalline structures of MnO₂ are the main factor affecting the catalytic activities of these samples, and γ-MnO₂ shows high catalytic performance. The excellent redox properties are responsible for the catalytic ability of γ-MnO₂. The gold-supported interaction can change the redox properties of catalysts and accelerate surface oxygen species transition, which can account for the catalytic activity enhancement of Au/MnO₂. We also studied intermediate species. The dioxymethylene (DOM) and formate species formed on the catalyst surface were considered intermediates, and were ultimately transformed into hydrocarbonate and carbonate and then decomposed into CO₂. A proposed mechanism of formaldehyde oxidation over Au/MnO₂ catalysts was also obtained.     

Life cycle assessment of environmental impact on municipal solid waste incineration power generation

Environmental Science and Pollution Research - Municipal solid waste (MSW) incineration power generation is an important treatment technology, which has been widely concerned in recent years. It is...