4-氯苯酚在水溶液中的光化学反应(Ⅰ)单线态氧和自由基的产生

在模拟太阳光照射下，４氯苯酚（４ＣＰ）浓度迅速降低，反应过程对应着产生大量的单线态氧和自由基．金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋能够加速这一过程，尤以Ｆｅ２＋、Ｆｅ３＋的影响更明显；在模拟太阳光照射下，向４ＣＰ体系加入的富里酸（ＦＡ），对４ＣＰ浓度降低略起抑制作用，这表明二者之间存在相互作用．但当再加入金属离子Ｆｅ２＋、Ｆｅ３＋、Ａｌ３＋后，能够加速４ＣＰ浓度降低，尤以Ｆｅ２＋、Ｆｅ３＋的影响更显著．     

粉煤灰/工业污泥烧结陶粒的制备与应用

以粉煤灰和工业污水处理站的剩余污泥为主要原材料，采用烧结法研制复合陶粒。分析了不同配方和不同烧结温度对陶粒性能的影响，以陶粒吸水率．容重为评价指标确定最佳配比和最佳烧结温度。提出用陶粒铺设景观水底，治理城市水体．并对其进行了可行性分析。粉煤灰／污泥陶粒的容重为0．79～0．9g／cm^3，吸水率为68．95％-80．01％。陶粒对水中氨氮和总磷吸附容量分别为0．03～0．05mg／g和0．01-0.02mg／g。     

Cells of the connective tissue differentiate and migrate into pollen sacs

In angiosperms, archesporial cells in the anther primordium undergo meiosis to form haploid pollen, the sole occupants of anther sacs. Anther sacs are held together by a matrix of parenchyma cells, the connective tissue. Cells of the connective tissue are not known to differentiate. We report the differentiation of parenchyma cells in the connective tissue of two Gordonia species into pollen-like structures (described as pseudopollen), which migrate into the anther sacs before dehiscence. Pollen and pseudopollen were distinguishable by morphology and staining. Pollen were tricolpate to spherical while pseudopollen were less rigid and transparent with a ribbed surface. Both types were different in size, shape, staining and surface architecture. The ratio of the number of pseudopollen to pollen was 1:3. During ontogeny in the connective tissue, neither cell division nor tetrad formation was observed and hence pseudopollen were presumed to be diploid. Only normal pollen germinated on a germination medium. Fixed preparations in time seemed to indicate that pseudopollen migrate from the connective tissue into the anther sac.     

Atmospheric particulate pollution of Lanzhou using magnetic measurements

１　ＩｎｔｒｏｄｕｃｔｉｏｎＡｔｍｏｓｐｈｅｒｉｃｐａｒｔｉｃｕｌａｔｅｉｓｏｎｅｏｆｔｈｅｍａｉｎａｔｍｏｓｐｈｅｒｉｃｐｏｌｌｕｔａｎｔｓｉｎＣｈｉｎａ．Ｉｔｍａｙｂｅｈａｒｍｆｕｌｉｔｓｅｌｆａｎｄｃａｎａｃｔａｓａｃａｒｒｉｅｒｏｆｔｏｘｉｃｍａｔｔｅｒｓｗｈｉｃｈｍａｙｈａｖｅｒｅｍａｒｋａｂｌｅｉｍｐａｃｔｓｏｎｈｕｍａｎｈｅａｌｔｈａｎｄａｔｍｏｓｐｈｅｒｉｃｅｎｖｉｒｏｎｍｅｎｔｑｕａｌｉｔｙ．Ｃｏｍｂｕｓｔｉｏｎｏｆｃｏａｌ，ｗｈｉｃｈｓｔｉｌｌｓｅｒｖｅｓａｓｐｒｉｍａｒｙｅ…     

大直径TA2卷焊坯制备工艺

此文介绍尺寸为φ1547×L900×δ30的大直径TA2卷焊坯的制备工艺。主要包括卷焊坯设计、展开下料的计算、卷圆工艺、焊接工艺等,可供同类材质圆筒件卷圆时参考。     

新型生活污水处理装置研究

介绍了新型生活污水处理装置的工艺 ,影响装置处理效果的主要因素。     

海37引信回转体座冷挤压工艺

回转体座是海37引信中的关键件,要求有一定的机械强度、耐磨性.研制期间,曾用压铸铝合金,由于铝合金压铸内部存在着气孔,表面粗糙.不能满足其机械性能的要求.针对这一现象,研制了回转体座冷挤压成形工艺,零件表面质量好,成本低,满足了产品的机械性能要求.     

低浓度渣油-水系乳化液的抑尘性能现场试验研究

本文介绍了作者用渣油－水系乳化液做路面抑尘剂在某矿露天坑３种不同类型路面进行的大规模工业性试验。现场测定结果表明：这种路面抑尘剂可以获得比较理想的防尘效果，长期使用该乳化液可取得显著的综合经济效益。