High-performance permanent magnets

 High-performance permanent magnets (pms) are based on compounds with outstanding intrinsic magnetic properties as well as on optimized microstructures and alloy compositions. The most powerful pm materials at present are RE–TM intermetallic alloys which derive their exceptional magnetic properties from the favourable combination of rare earth metals (RE=Nd, Pr, Sm) with transition metals (TM=Fe, Co), in particular magnets based on (Nd,Pr)₂Fe₁₄B and Sm₂(Co,Cu,Fe,Zr)₁₇. Their development during the last 20 years has involved a dramatic improvement in their performance by a factor of >15 compared with conventional ferrite pms therefore contributing positively to the ever-increasing demand for pms in many (including new) application fields, to the extent that RE–TM pms now account for nearly half of the worldwide market. This review article first gives a brief introduction to the basics of ferromagnetism to confer an insight into the variety of (permanent) magnets, their manufacture and application fields. We then examine the rather complex relationship between the microstructure and the magnetic properties for the two highest-performance and most promising pm materials mentioned. By using numerical micromagnetic simulations on the basis of the Finite Element technique the correlation can be quantitatively predicted, thus providing a powerful tool for the further development of optimized high-performance pms.     

Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Persistent organochlorines in beluga whales (Delphinapterus leucas) from the St Lawrence River estuary--II. Temporal trends, 1982-1994

Blubber samples from 16 dead beluga whales (Delphinapterus leucas) collected during 1993-1994 in the St Lawrence River estuary were analysed for PCB congeners and other persistent organochlorines (DDT-group, chlorinated bornanes (toxaphene, CHB), chlordane SigmaCHL), hexachloro-cyclohexanes (SigmaHCH), chlorobenzenes (SigmaCBz), tris(p-chlorophenyl methane (TPMe) and mirex). Concentrations and relative proportions of major individual organochlorine components were within the same range as previous results for this population. Temporal trends were studied by combining the results with data from the analysis of 44 samples (1986-1990) and (for DDT and Aroclor PCBs only) with 20 samples (1982-1985) reported by Martineau et al., 1987. Results were lipid normalized and then age-adjusted by an ANCOVA model. Significant relationships between age and concentrations of most organochlorine groups were found for females but not for males. Significant declines were observed in SigmaDDT, and Aroclor PCBs (1.5- and 1.9-fold, respectively) in males between the 1982-1985 and 1993-1994 collection periods. Significant declines were also observed for SigmaHCH and SigmaCBz in males between 1986-1988 and 1993-1994. Mean concentrations of CHBs were significantly higher in 1993-1994 than in earlier years while dieldrin, SigmaCHL, mirex, and TPMe showed no trend. Declines in concentrations of major organochlorine groups were not observed in females possibly because of higher year to year, and within year, variation. The temporal trend in DDT and PCB concentrations in male beluga blubber paralleled trends in seals, eels, and seabirds in the St Lawrence estuary observed during the 1980s.     

Biomonitoring environmental contaminants near a municipal solid-waste combustor

Tetrachlorodibenzo-p-dioxin (TCDD), tetrachlorodibenzofuran (TCDF) and selected metal concentrations were measured in eggs and nestlings of anhingas (Anhinga anhinga) and white ibises (Eudocimus albus) collected from a colony next to a municipal solid-waste (MSW) combustor and ash landfill. Most of the measured residues, including TCDD, TCDF, arsenic, beryllium, cadmium and nickel, remained at pre-operational levels during the first five years of facility operation. Selenium (in anhingas) and mercury (in both anhingas and ibises) occurred at their lowest concentrations in samples collected during the fifth year of facility operation (Year-5). Alternatively, concentrations of lead in ibis nestlings were highest in Year-1 and Year-5 compared to Year-0. The MSW combustor could neither be ruled out nor confirmed as the source of this lead.     

The impact of constituent ions of acid mist on assimilation and stomatal conductance of Norway spruce prior and post mid-winter freezing

Norway spruce seedlings were sprayed twice weekly with one of a range of artificial mists at either pH 2.5, 3.0 or 5.6, for three months. The mists consisted of either (NH4)2SO4 (pH 5.6), NH4NO3 (pH 5.6), water (pH 5.6), HNO3 (pH 2.5), H2SO4 (pH 2.5). In late December 1988 and early January 1989 the light response of assimilation and stomatal conductance were assessed in the laboratory following a 4-day equilibration period at 12 degrees C. The intact trees were then subjected to a mild (-10 degrees C), brief (3 h) frost in the dark and the recovery of light saturated assimilation (Amax) was followed during the subsequent light period. The same trees were then subjected to a second 3 h (-18 degrees C) frost. The recovery of Amax during the next day was followed. All ion-containing mists stimulated Amax and apparent quantum yield relative to control trees, irrespective of pH. The mists containing SO4 made stomatal conductance unresponsive to light flux density and caused the stomata to lock open. Frosts of -10 degrees C and -18 degrees C did not inhibit the Amax of control trees for longer than 200 min into the light period. In contrast, the ion-containing mists exerted a significant inhibitory effect upon the recovery of Amax. Nitric acid inhibited Amax to 35% of the pre-frost value, whilst the remaining treatments inhibited Amax between 15% and 40% of the pre-frost value. It is concluded that SO4 causes increased mid-winter frost sensitivity and NO3 ameliortes this effect. The results are discussed in relation to forest decline.     

The response of Lemna trisulca L. to cadmium

Lemna trisulca was grown, using aseptic culture techniques in a filter-sterilized medium, a portion of which was replaced regularly during experiments. L. trisulca responded to the addition of 0.64 microM Cd with a reduction in multiplication rate (MR) 2 +/- 1 days after exposure. The internal Cd content reached 1000 +/- 140 microg Cd/g (dry wt) within 2 days exposure to 0.64 microM Cd. The final yield was reduced by an average of c.8% for each day of exposure to 0.64 microM Cd in a 14 day experiment. This implies that an equilibration period should be used for short-term bioassay tests before the effect of a toxicant is determined. Pretreating L. trisulca with 0.08 or 0.32 microM Cd for 6 weeks had no significant effect on MR or Cd uptake when plants were subsequently exposed to a range of Cd concentrations or grown in a control medium. This suggests that L. trisulca does not become acclimated to elevated Cd concentrations. The MR of L. trisulca fluctuated over a period of almost 600 days and the doubling time ranged from 1.6 to 2.4 days. This produced more than a fivefold difference in final yield in experiments of 14 days duration. The reduction in MR in response to 0.32 microM Cd during this same 600 days period averaged 24% with a coefficient of variation of 38%, and varied with the MR of control cultures. Fluctuations in the intrinsic growth rate and the effect of a toxicant on L. trisulca could potentially confound the assessment of toxicity and must be carefully considered when designing test protocols for aquatic plants.     

Petroleum and hazardous chemical spills in Newark Bay, New Jersey, USA from 1982 to 1991

Newark Bay, New Jersey, is particularly vulnerable to ecological damage from petroleum and chemical spills, as a result of the enclosed nature and shallow depth of the bay, the high frequency of shipping traffic, and the numerous chemical and petroleum transfer terminals located alongs its shores. To evaluate the potential impacts to the natural resources of this coastal estuarine ecosystem, chemical and petroleum accidents reported to the US Coast Guard (USCG) between 1982 and 1991 were compiled to determine the frequency and volume of these incidents in Newark Bay and in each of its major tributaries. Records obtained from the USCG National Response Center's computerized database indicated that more than 1453 accidental incidents, resulting in the release of more than 18 million US gallons of hazardous materials and petroleum products, occurred throughout Newark Bay during this period of time. The bulk of the materials released to the aquatic environment consisted of petroleum products, specifically No. 6 Fuel Oil (103 spills, 12 829 272 US gal) and gasoline (207 spills, 48 816 US gal). The majority of the reported incidents occurred in the Arthur Kill and its tributaries, as well as in the Kill Van Kull and the Passaic River. The results of this study indicated that the accidental discharge of petroleum and hazardous chemicals represents a significant source of chemical pollution in Newark Bay. Based on the frequency of spills and the volume of materials released to the aquatic environment, it is likely that these events are having a deleterious effect on the Newark Bay ecosystem.     

Cellular and ultrastructural changes in the endoderm of the temperate sea anemone Anemonia viridis as a result of increased temperature

Exposure of the temperate sea anemone Anemonia viridis Forskål to increased seawater temperature (from 16 to 26°C) reduced the lysosomal latency of coelenterate tissues. Lysosomes in the mesenterial filaments of anemones were destabilised by increased temperature, with greater destabilisation in heat-shocked symbiotic anemones than in heat-shocked aposymbiotic anemones in the early stages of the experiment. Lysosomal enzyme activity in zooxanthellae from heat-shocked symbiotic anemones was associated with the algal membranes and the cytoplasm of degenerate algal cells. While the relationship between host coelenterate and symbiotic alga may confer many benefits under normal conditions, comparison of the responses of symbiotic and aposymbiotic anemones to heat shock suggests that there may be disadvantages for symbiotic anemones under stress.