Evaluation of PCDD/Fs patterns emitted from incinerator via direct ambient sampling and indirect serum levels assessment of Taiwanese

The aim of this study was to evaluate the PCDD/Fs patterns in ambient air based on data information emitted from incinerator generated from ambient air measurements and those in serum. Four circular zones, namely A, B, C, and D, were identified based on simulated ambient annual average PCDD/Fs concentrations, from a selected municipal waste incinerator. Sixteen ambient samples were taken from the 4 circular zones across 4-seasons. Eighty-nine volunteers were recruited according to the demographic distribution within each zone. PCDD/Fs profiles were documented both for air and serum samples collected. Comparing to the congener patterns from ambient air and serum samples, we found that OCDD, OCDF, 1,2,3,4,6,7,8-HpCDD, and 1,2,3,4,6,7,8-HpCDF were the predominant groups among 17 congeners from both the ambient air and serum sample. And, factor analysis showed the distribution patterns of PCDD/Fs from ambient air and serum samples are almost identical across different zones, except for congener patterns of serum samples from residents in zone C. In addition, the average PCDD/Fs level significantly reduced for about 10 folds than those of the other three seasons when the incinerator was shut down in one of sampling periods. We might conclude that ambient air exposure was the most important contributor to PCDD/Fs levels in ambient air but not the single in serum. Therefore, another or more powerful source, such as occupational exposure, dietary intake or the consumption of local food, should be further investigated at the same time.     

Rapid reductive destruction of hazardous organic compounds by nanoscale Fe0

Fe0-mediated reductive destruction of hazardous organic compounds such as chlorinated organic compounds (COCs) and nitroaromatic compounds (NACs) in the aqueous phase is one of the latest innovative technologies. In this paper, rapid reductive degradation of COCs and NACs by synthesized nanoscale Fe0 in anaerobic batch systems was presented. The nanoscale Fe0, characterized by high specific surface area and high reactivity, rapidly transformed trichloroethylene (TCE), chloroform (CF), nitrobenzene (NB), nitrotoluene (NT), dinitrobenzene (DNB) and dinitrotoluene (DNT) under ambient conditions, which results in complete disappearance of the parent compounds from the aqueous phase within a few minutes. GC analysis reported that the main products of the dechlorination of TCE and CF were ethane and methane as well as that most of the nitro groups in NACs were reductively transformed to amine groups. These results suggest that the rapid reductive destruction by nanoscale Fe0 is potentially a viable in situ or aboveground treatment of groundwater contaminated with hazardous organic compounds including COCs and NACs.     

PCBs fires: Correlation of chlorobenzene isomer and PCB homolog contents of PCB fluids with PCDD and PCDF contents of soot

PCBs, PCDDs, and PCDFs are subject to new regulations promulgated under the Toxic Substances Control Act and the Resource Conservation and Recovery Act. The finding of PCDDs and PCDFs in PCBs could restrict disposal options for PCBs. A review of major fire incidents in the U.S., indicates that PCDDs have been found only in the Binghamton, N.Y., transformer fire incident. Laboratory combustion studies further support PCDFs formation from PCBs and PCDDs from chlorobenzenes. No PCDDs were found in analyses of fluids from transformers involved in transformer fire incidents. PCDFs do not appear to increase in PCBs askarel fluids from normal usage in electrical equipment.     

Control targets for the management of biological systems

Attention is focused on biological systems which are describable in terms of ordinary differential equations subject to human control inputs. The concept of an isochronal system is introduced in order to include systems for which the differential equations are valid only over regularly reoccurring time intervals.It is assumed that the control inputs are to be chosen so that an integral cost function of the state of the system, the control used, current time, and the time interval of the control program is minimized. Problems associated with minimizing this cost function over an infinitely long time interval is then considered. Difficulties inherent with minimizing a cost integral on an infinite time interval are shown to be avoided by minimizing an average of the cost function over an unknown but periodic time interval. Under proper circumstance, the optimal control program for the average cost function is either identical to or a good approximation to the optimal control program for the original cost function over an infinitely long time interval.Necessary conditions are obtained for minimizing an average cost function over an unspecified time interval subject to the system equations. For a given problem the necessary conditions will yield but a single system trajectory in the state space. For management purposes this trajectory may be thought of as a target to which the system should be driven and maintained.A number of examples illustrate the use of the necessary conditions to obtain control targets. Certain problems associated with the stability of the target solutions are illustrated with the examples.     

A kinematic model of the city of Miami ocean outfall plume behavior

A kinematic model is developed to predict the movement of effluent from the City of Miami ocean outfall. The outfall terminates at the 5 m isobath in the near vicinity of three tidal inlets opening into Biscayne Bay. Due to the shallow, uncomplicated topography and oscillatory coastal currents a linear bottom friction law is valid, which justifies the use of a potential flow model. The inlets are modeled as sinks and the outfall as a source discharging into a uniform coastal current. The model predicts that effluent will enter Biscayne Bay in approximately 3 h during flood tide for coastal current headings within an arc of 210° to 40°. Dye-tracking experiments were in good agreement with the model results. Local wind records suggest that sewage effluent enters Biscayne Bay on about 80% of the flood tides, or roughly 11 times per week.     

The effects of different carbon sources on microbial mediation of arsenic in arsenic-contaminated sediment

Changes in speciation and mobility of As by indigenous bacteria in As-contaminated sediments (339 mg/kg) from an abandoned Au–Ag mine area in Korea were investigated after biostimulation with a variety of carbon sources, including acetate, lactate and glucose in batch experiments. Sequential extraction analysis designed to determine the form of As occurrence revealed that 40 and 47% of As were present in the sediment as Fe-associated and residual fractions, respectively. After 22-day incubation with acetate and lactate, the presence of indigenous bacteria increased the amount of total dissolved As from both Fe-associated and residual fractions in the sediment. More than 99% of dissolved As existed as As(V) in biotic slurries in contrast to sterile controls (less than 50% of total dissolved As), which indicated that indigenous bacteria transformed some dissolved As(III) to As(V). In real environments, depending on the pH, microbially-produced aqueous As(V) may be either immobilized through adsorption or reduced to As(III) after migration to the anoxic subsurface.     

Individual and combined toxicity of some petroleum aromatics to the marine amphipod Elasmopus pectenicrus

Toxicity of 4 components of petroleum oils to the marine amphipod Elasmopus pectenicrus (Bate) has been assessed. Two ephemeral aromatic hydrocarbons, naphthalene (A) and 1, 2, 4-trimethylbenzene (B) were more toxic than two persistent aromatics, o-cresol (C) and o-toluidine (D). The acute toxicity concentrations obtained for individual aromatic compounds were always greater than the actual concentrations found in the water-soluble fractions (WSF) of fuel oils. Results from mixtures of 2 or more components indicated that the LC₅₀ levels were primarily determined by the more toxic substances, A and B. Naphthalene and 1, 2, 4-trimethylbenzene became more toxic to the E. pectenicrus when present in a mixture of more than 2 components, and the toxicity increased with increasing numbers of components present. Synergistic effects, therefore, possibly occur in the whole WSF. No antagonistic effects were observed among the 4 petroleum aromatics.University of Texas, Marine Science Institute Contribution No. 290     

The iridoid glycoside,catalpol, as a deterrent to the predatorCamponotus floridanus (Formicidae)

Summary We investigated the role of the iridoid glycoside, catalpol, as a deterrent to the predator,Camponotus floridanus. Four laboratory colonies of this ant were offered buckeye caterpillars (Junonia coenia: Nymphalidae) raised on diets with and without catalpol. The same colonies were offered sugar-water solutions containing varying concentrations of catalpol, in both no-choice and choice tests. Regardless of diet, buckeye caterpillars appeared to be morphologically protected from predation by the ants, possibly because of their large spines or tough cuticle. However, buckeyes raised on diets with catalpol had high concentrations of catalpol in their hemolymph; extracts of this high-catalpol hemolymph proved to be an effective deterrent to the ants. When starved ants were not given the choice of food items, they were more likely to consume sucrose solutions that contained 5 mg catalpol/ml or 10 mg catalpol/ml than they were to consume solutions with 20 mg catalpol/ml. When they were given a choice of sugar solution or a sugar solution containing catalpol, the ants avoided solutions with catalpol at any of these concentrations. Ant colony responses to catalpol in sucrose solutions varied considerably over time and among colonies.     

Variations in heavy metal contamination of stream water and groundwater affected by an abandoned lead–zinc mine in Korea

This study evaluated variations in heavy metal contamination of stream waters and groundwaters affected by an abandoned lead–zinc mine, where a rockfill dam for water storage will be built 11 km downstream. For these purposes, a total of 10 rounds of stream and groundwater samplings and subsequent chemical analyses were performed during 2002–2003. Results of an exploratory investigation of stream waters in 2000 indicated substantial contamination with heavy metals including zinc (Zn), iron (Fe) and arsenic (As) for at least 6 km downstream from the mine. Stream waters near the mine showed metal contamination as high as arsenic (As) 8,923 μg L⁻¹, copper (Cu) 616 μg L⁻¹, cadmium (Cd) 223 μg L⁻¹ and lead (Pb) 10,590 μg L⁻¹, which greatly exceeded the Korean stream water guidelines. Remediation focused on the mine tailing piles largely improved the stream water qualities. However, there have still been quality problems for the waters containing relatively high concentrations of As (6–174 μg L⁻¹), Cd (1–46 μg L⁻¹) and Pb (2–26 μg L⁻¹). Rainfall infiltration into the mine tailing piles resulted in an increase of heavy metals in the stream waters due to direct discharge of waste effluent, while dilution of the contaminated stream waters improved the water quality due to mixing with metal free rain waters. Levels of As, Cu and chromium (Cr) largely decreased after heavy rain but that of Pb was rather elevated. The stream waters were characterized by high concentrations of calcium (Ca) and sulfate (SO₄), which were derived from dissolution and leaching of carbonate and sulfide minerals. It was observed that the proportions of Ca and SO₄ increased while those of bicarbonate (HCO₃) and sodium and potassium (Na+K) decreased after a light rainfall event. Most interestingly, the reverse was generally detected for the groundwaters. The zinc, being the metal mined, was the most dominant heavy metal in the groundwaters (1758–10,550 μg L⁻¹) near the mine, which far exceeded the Korean standard of 1000 μg L⁻¹ for drinking water. The decreases in the heavy metals contents in the groundwaters associated with reduced rainfall were quite different from the increases observed for the stream waters, which is not clearly understood at this time and warrants further investigation.     

Assessment of Groundwater Quality and Contamination from Uranium-Bearing Black Shale in Goesan–Boeun Areas, Korea

This study was initiated to identify the impact of metals and uranium enriched soil and black shale in groundwater quality and contamination. From a Piper diagram, groundwater was classified into four types as (Ca+Mg)–HCO₃ type, (Ca+Mg)–SO₄ type, the mixed type of these two and Na–HCO₃ type, reflecting the complicated nature of geology of the study area. Silicate weathering appeared to be the major water–rock interaction. In groundwater, metals including Cr, Pb, Cu and V, previously identified as being enriched in soils and black shale, were much lower in concentrations than Korean and US EPA drinking water guidelines. Instead, Fe and Mn caused major water-quality problems. In the artesian groundwater from an abandoned uranium mine, the uranium concentration was 21.3 µg L^–1, slightly higher than EPA guidelines of 20 µg L^–1. Heavy metals in groundwater appeared to be controlled mostly by sorptions on to Fe- and Mn-oxyhydroxides. They could be remobilised in groundwater with changes of pH and Eh conditions due to acid mine drainage from black shale or the recharge of fresh water. Uranium would be associated with carbonate and sulphate complexes in groundwater. Because of the remaining water-quality problems in the study area, we suggested containment of identified mine wastes, considering remedial measures for local problems with Fe and Mn, continuous monitoring of groundwater and developing groundwater from deep aquifers.