GEOMORPHOLOGY OF STEEPLAND HEADWATERS: THE TRANSITION FROM HILLSLOPES TO CHANNELS1

Headwater streams comprise 60 to 80 percent of the cumulative length of river networks. In hilly to mountainous terrain, they reflect a mix of hillslope and channel processes because of their close proximity to sediment source areas. Their morphology is an assemblage of residual soils, landslide deposits, wood, boulders, thin patches of poorly sorted alluvium, and stretches of bedrock. Longitudinal profiles of these channels are strongly influenced by steps created by sediment deposits, large wood, and boulders. Due to the combination of small drainage area, stepped shallow gradient, large roughness elements, and cohesive sediments, headwater streams typically transport little sediment or coarse wood debris by fluvial processes. Consequently, headwaters act as sediment reservoirs for periods spanning decades to centuries. The accumulated sediment and wood may be episodically evacuated by debris flows, debris floods, or gully erosion and transported to larger channels. In mountain environments, these processes deliver significant amounts of materials that form riverine habitats in larger channels. In managed steepland forests, accelerated rates of landslides and debris flows resulting from the harvest of headwater forests have the potential to seriously impact the morphology of headwater streams and downstream resources.     

BASE FLOW TRENDS IN URBANIZING WATERSHEDS OF THE DELAWARE RIVER BASIN1

Rapid land development is raising concern regarding the ability of urbanizing watersheds to sustain adequate base flow during periods of drought. Long term streamflow records from unregulated watersheds of the lower to middle Delaware River basin are examined to evaluate the impact of urbanization and imperviousness on base flow. Trends in annual base flow volumes, seven‐day low flows, and runoff ratios are determined for six urbanizing watersheds and four reference watersheds across three distinct physiographic regions. Hydrograph separation is used to determine annual base flow and stormflow volumes, and nonparametric trend tests are conducted on the resulting time series. Of the watersheds examined, the expected effects of declining base flow volumes and seven‐day low flows and increasing stormflows are seen in only one watershed that is approximately 20 percent impervious and has been subject to a net water export over the past 15 years. Both interbasin transfers and hydrologic mechanisms are invoked to explain these results. The results show that increases in impervious area may not result in measurable reductions in base flow at the watershed scale.     

Identification of soil heavy metal sources from anthropogenic activities and pollution assessment of Fuyang County, China

Understanding regional variations of soil heavy metals and their anthropogenic influence are very important for environmental planning. In this study, 286 surface soil samples were collected in Fuyang county, and the 'total' metals for copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd) and nickel (Ni) were measured in 2005. Statistic analysis showed that Cu, Zn, Pb and Cd had been added by exterior factors, and Ni was mainly controlled by natural factors. The combination of multivariate statistical and geostatistical analysis successfully grouped three groups (Cu, Zn and Pb; Cd; and Ni) of heavy metals from different sources. Through pollution evaluation, it was found that 15.76% of the study area for Cu, Zn and Pb, and 46.14% for Cd suffered from moderate or severe pollution. Further spatial analysis identified the limestone mining activities, paper mills, cement factory and metallurgic activities were the main sources for the concentration of Cu, Zn, Pb and Cd in soils, and soil Ni was mainly determined by the parent materials.     

Soil pollution by PAHs in urban soils: a comparison of three European cities

The purpose of this study was to determine the degree of contamination with polycyclic aromatic hydrocarbons (PAHs) in samples of urban soil from three European cities: Glasgow (UK), Torino (Italy) and Ljubljana (Slovenia). Fifteen PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, indeno[1,2,3-c,d]pyrene) were measured in urban soil samples, using harmonised sampling, sample extraction and analyte quantification methods. Although the mean concentration of each PAH in urban soils of each city showed a wide range of values, high levels of contamination were only evident in Glasgow, where the sum of concentrations of 15 PAHs was in the range 1487-51,822 microg kg(-1), cf. ranges in the other two cities were about ten-fold lower (89.5-4488 microg kg(-1)). The three predominant PAHs were phenanthrene, fluoranthene and pyrene, with the sum of these compounds about 40% of the total PAH content. These data, together with some special molecular indices based on ratios of selected PAHs, suggest pyrogenic origins, especially motor vehicle exhausts, to be the major sources of PAHs in urban soils of the three cities. The largest concentrations for PAHs were often found in sites close to the historic quarters of the cities. Overall, the different climatic conditions, the organic carbon contents of soil, and the source apportionment were the dominant factors affecting accumulation of PAHs in soil.     

Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

Behaviour of different lichen species as biomonitors of air pollution by PAHs in natural ecosystems

Six different species of lichens (Parmelia sulcata Tayl., Evernia prunastri (L.) Ach., Ramalina farinacea, Pseudevernia furfuracea (L.) Zopf., Usnea sp. and Lobaria pulmonaria (Schreb.) Hoffm.) were collected in two mountain valleys in Central Pyrenees: the Aspe and Aragon valleys. Two multivariate techniques have been applied with different purposes, ANOVA and Discriminant Analysis (DA), to evaluate the data. The PAHs spatial distribution was studied in the three more abundant and widespread species in the area: P. sulcata, E. prunastri (L.) Ach. and R. farinacea in terms of total PAHs, PAHs related to the combustion processes and toxicity. Different behaviour of each lichen species to trap PAHs was found, being P. sulcata the best one to monitor the most persistent PAHs of pyrogenic origin and E. prunastri the most appropriate to provide information about pyrogenic and petrogenic PAHs. Traffic was the most relevant influence in PAHs bioaccumulation in lichen species.     

The Influence of pH on Mobility of Heavy Metals from Municipal Solid Waste Incinerator Fly Ash

Incineration has become one of the principal methods for municipal solid waste disposal particularly in all large cities throughout the world. Currently, the municipal solid waste incinerator fly ashes (MSWIF) are disposed of by landfill. The metal speciation of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in MSWIF after been extracted with water at different pH values were examined using a sequential extraction procedure. The extraction sequence was as follows: (1) Exchangeable (NaOAc, pH 8.2), (2) Bound to Carbonates (NaOAc, pH 5.0), (3) Bound to metal oxides (HONH3Cl), (4) Bound to organic matters (HNO3, H2O2), and (5) Residual (HNO3, HCl, H2O2, HF, 1:3:1:3). The heavy metal contents in the extraction solutions were determined by inductively coupled plasma atomic emission spectrometry. The heavy metal concentrations in the different fractions obtained by sequential extraction show distinct distribution trends. The extractable fraction ranges from 25.5 to 88% of the total element content. With the pH of the extractant fall below the neutral and acidic ranges, the concentrations of heavy metals rise substantially due to the released of metals bound to carbonate fraction.     

An Automated Technique for Delineating and Characterizing Valley-Bottom Settings

Accurate delineation and characterization of valley-bottom settings is crucial to the assessment of the biological and geomorphological components of riverine systems; yet, to date, most valley-bottom mapping endeavors have been done manually. To improve this situation, we developed automated techniques in a Geographic Information System (GIS) for delineating and characterizing valley-bottom settings in river basins ranging in size from approximately 1,000–10,000 km². All procedures were developed with ARC/INFO GIS software and fully automated in Arc Macro Language (AML). The GRID module is required for valley-bottom delineation and slope calculations; whereas characterization (i.e., measuring the width of the valley-bottom zone) requires Coordinate Geometry (COGO) in the ARCEDIT module. The process requires three inputs: a polygon coverage of the analysis area; an arc coverage of its hydrography, and a grid representing its digital elevation. The AML is designed to operate within a wide range of computer memory/disk space options, and it allows users to customize several procedures to match the scale and complexity of a given analysis area with available computer hardware.     

四川青衣江上游若壁小沟泥石流及其防治对策

若壁小沟为四川青衣江上游左岸的一级支沟,该沟处于深切割高山峡谷区,地形坡度陡,构造发育,岩石破碎,加之较为丰富的降雨,使该沟具备泥石流暴发的条件。该沟如果暴发泥石流,将对某电站拟建厂房产生威胁。该沟泥石流具有成灾快、危害严重、松散固体物质以坡面崩塌补给为主、活动频率中等等特征。通过野外考察和取样分析,该沟泥石流的性质和类型为中频率—中~大规模—低~高粘度泥石质泥石流。分析预测了该沟泥石流在强烈地震条件下、近期出现不同频率暴雨情况下及人类活动影响下的发展趋势。在此基础上,提出了该沟泥石流减灾工程规划方案。     

Concentrations of Potentially Toxic Metals in Urban Soils of Seville: Relationship with Different Land Uses

Fifty-two samples of surface soils were taken in the urban area of Seville, to assess the possible influence of different land uses on their metal contents and their relationship with several soil properties. The samples corresponded to five categories or land uses: agricultural, parks, ornamental gardens, riverbanks, and roadsides. Sequential extraction of metal according to the procedure proposed by the former Community Bureau of Reference (BCR) was carried out, and pseudo-total (aqua regia soluble) metal contents were determined. Lower organic C, total N and available P and K contents were found in riverbank samples, probably due to the lack of manuring of those sites, left in a natural status. In contrast, significantly higher electrical conductivity was found in those sites, due to the tidal influence of the nearby Atlantic Ocean. Other land uses did not show significant differences in the general properties. Concentrations of Cu, Pb and Zn, both aqua-regia soluble and sequentially extracted, were clearly higher in soils from ornamental gardens, whereas the concentrations in the riverbank samples were slightly lower than the other categories. In contrast, other metals (Cd, Cr, Fe, Mn, Ni) were uniformly distributed throughout all land uses. A strong statistical association is found among the concentrations of Cu, Pb, Zn and organic C, suggesting that the larger contents of these metals in ornamental gardens are partly due to organic amendments added to those sites more frequently than to other kinds of sites. Considering the conclusions of previous studies, heavy traffic can also contribute to those `urban’ metals in urban soils. Periodic monitoring of the concentrations of urban metals in busy city centres and of the quality of amendments added to soils of recreational areas are recommended.