Joining sheet panels to thin-walled tubular profiles by tube end forming

This paper is focused on novel utilizations of the fundamental modes of deformation of tube end forming for assembling sheet panels to thin-walled tubular profiles.The objective is to present an innovative and environmental friendly joining technology built upon the combination of compression beading with tube inversion that can successfully eliminate currently available technologies based on mechanical fixing with fasteners, welding and structural adhesive bonding. The technology works at room temperature, is capable of ensuring significant economic and time savings and offers potential for opening new markets for the assembly of lightweight frame structures.The presentation is supported by experimentation and numerical modelling based on independently determined mechanical properties of the materials with the purpose of characterizing and evaluating the process feasibility limits as a function of the major operative parameters.The feasibility of joining sheet panels to tubular profiles by means of the proposed technology is demonstrated by presenting industrial applications and by evaluating the performance of a safety auto part in an operation failure test.     

Formation of ferric flocks to remove for the removal of Zn and Cu from dockyard wastewater

Wastewater from wash down of boat hulls contains typically Cu, Zn and organometallic biocides, e.g. tributyltin (TBT). In some cases this wastewater is led directly into the marine system. In the present paper, a cheap flocculation method (iron flocculants) for removal of Cu and Zn from the wastewater is investigated and the method was shown successful. TBT concentration in a sample from a German dockyard was also decreased during flocculation, but the TBT removed was already associated with small particulates in the original sample. Low concentrations of heavy metals were obtained by flocculation: <0.05 mg Cu/l and 0.2 mg Zn/l. An erratum to this article can be found at     

Cadmium,zinc and total mercury levels in the tissues of several fish species from La Plata river estuary,Argentina

A survey of the concentrations of heavy metals — cadmium, zinc and total mercury — in the tissues of fifteen fish species from Samborombón Bay, La Plata river estuary, in Argentina, has been carried out. Liver appeared to be the main organ accumulating cadmium and zinc, while both liver and muscle showed a similar ability for accumulating mercury. The bioaccumulation process was verified for the three metals analyzed, even though low concentrations have been determined. The biomagnification process of the metals studied was not verified in this environment. The highest metal concentrations were recorded in Mugil liza, and particulate matter and sediments — which are closely related to its trophic and ecological habits — seemed to be the main source of metals for this species. Both Micropogonias furnieri and Mugil liza were recognized as possible indicator species for future monitoring programmes for heavy metals in Samborombón Bay. Considering the present results, this area of La Plata river estuary is characterized as a non-polluted environment.Scientific Researcher from the National Council for Scientific and Technological Researches (CONICET), of Argentina     

Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO<Subscript>2</Subscript> in the treatment of solution containing benzene,toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.

Open image in new window

Graphical abstract ?

     

Environmental fate of glyphosate and aminomethylphosphonic acid in surface waters and soil of agricultural basins

Argentinian agricultural production is fundamentally based on a technological package that combines no-till and glyphosate in the cultivation of transgenic crops. Transgenic crops (soybean, maize and cotton) occupy 23 million hectares. This means that glyphosate is the most employed herbicide in the country, where 180–200 million liters are applied every year.     

The Brazilian National Intercomparison Program (PNI/IRD/CNEN): evaluation of 15 years of data

The Instituto de Radioprote??o e Dosimetria has been coordinating the National Intercomparison Program (PNI) for 15 years, from 1991 to 2005. The objective is to evaluate the analytical performance of the laboratories in low-level activity concentration radionuclide assays in environmental samples. This work presents an evaluation of PNI data from 42 intercomparison runs, which distributed to 22 Brazilian laboratories 2511 samples evaluating 5768 radionuclide assays involving 32 radionuclides in the period from 1991 to 2004. The laboratory performance was evaluated using the Normalized Standard Deviation used by the U.S. EPA. For comparison aims, the Normalized Deviation, used by BIPM was also applied. Laboratory performance were grouped and evaluated in three periods of 5 years each. The first period shows, an average value of good performance of 71.2%, the second shows an average of 78.6% and the last an average of 82.3%. Performance for each kind of radionuclide is also presented.     

Biogeochemical characterization of surface waters in the Aljustrel mining area (South Portugal)

Aljustrel mining area (South Portugal) is a part of the Iberian Pyrite Belt and encloses six sulfide mineral masses. This mine is classified of high environmental risk due to the large tailings’ volume and acid mine drainage (AMD)-affected waters generated by sulfides’ oxidation. The use of biological indicators (e.g., diatoms) revealed to be an important tool to address the degree of AMD contamination in waters. Multivariate analysis has been used as a relevant approach for the characterization of AMD processes. Cluster analysis was used to integrate the significant amount and diversity of variables (physicochemical and biological), discriminating the different types of waters, characterized by the high complexity occurring in this region. The distinction of two main marked phenomena was achieved: (1) the circumneutral-Na-Cl water type (sites DA, PF, BX, BF, RO, CB), expressing the geological contributions of the Cenozoic sediments of Sado river basin, with high diatom diversity (predominating brackish diatoms as Entomoneis alata); and (2) the acid–metal-sulfated water type (sites BM, JU, RJ, AA, MR, BE, PC, AF), reflecting both the AMD contamination and the dissolution of minerals (e.g., silicates) from the hosting rocks, potentiated by the extremely low pH. This last group of sites showed lower diatom diversity but with typical diatoms from acid- and metal-contaminated waters (e.g., Pinnularia aljustrelica). In addition to these two water types, this hierarchical classification method also allowed to distinguish individual cases in subclusters, for example, treated dams (DC, DD), with alkaline substances (lime/limestone), that changed the physicochemical dynamics of the contaminated waters.