Etude des activites phosphatasiques du sol: Effets du pH et de certains herbicides

Phosphatasic activities in four alkaline soils and two acidic ones were studied. In all cases, the values for soil pH determined the prominent phosphatasic activity. The results indicated that acidic phosphatase was prominent in acidic soils, alkaline phosphatase was prominent in alkaline ones.We studied the action of 16 herbicides in two soils, an alkaline one and an acid one. We did not find any significant effect on the phosphatasic activities.     

Analysis of Ah receptor pathway activation by brominated flame retardants

Brominated flame-retardants (BFRs) are used as additives in plastics to decrease the rate of combustion of these materials, leading to greater consumer safety. As the use of plastics has increased, the production and use of flame-retardants has also grown. Many BFRs are persistent and have been detected in environmental samples, raising concerns about the biological/toxicological risk associated with their use. Most BFRs appear to be non-toxic, however there is still some concern that these compounds, or possible contaminants in BFRs mixtures could interact with cellular receptors. In this study we have examined the interaction of decabromodiphenyl ether, Firemaster BP4A (tetrabromobisphenol A), Firemaster PHT4 (tetrabromophthalic anhydride), hexabromobenzene, pentabromotoluene, decabromobiphenyl, Firemaster BP-6 (2,2^′,4,4^′,5,5^′-hexabromobiphenyl) and possible contaminants of BFR mixtures with the Ah receptor. Receptor binding and activation was examined using the Gel Retardation Assay and increased expression of dioxin responsive genes was detected using the reporter gene based CALUX assay. The results demonstrate the ability of BFRs to activate the AhR signal transduction pathway at moderate to high concentrations as assessed using both assays. AhR-dependent activation by BFRs may be due in part to contaminants present in commercial/technical mixtures. This was suggested by our comparative analysis of Firemaster BP-6 versus its primary component 2,2^′,4,4^′,5,5^′-hexabromobiphenyl. Some technical mixtures of brominated flame-retardants contain brominated biphenyls, dioxins or dibenzofurans as contaminants. When tested in the CALUX assay these compounds were found to be equivalent to, or more active than their chlorinated analogues. Relative effective potency values were determined from dose response curves for these brominated HAHs.     

Influence of water hardening of the chorion on cadmium accumulation in medaka (Oryzias latipes) eggs

This report describes a study in which in vitro fertilization methods were used to expose medaka (Oryzias latipes) eggs to cadmium (Cd(2+)). This approach was applied to address the differential sensitivity and cumulative potential of Cd(2+) when exposure was initiated early (before fertilization and water hardening of the chorion) versus later during embryo development (i.e., well after the chorion has undergone water hardening). Following range finding exposures (2.5, 10, 20, 40 or 80 mg/l) under artificially controlled experimental procedures, results from hatching success and embryo malformations showed the earlier exposure interval more sensitive than the assay involving only the embryonated egg. Subsequent accumulation studies have shown that the exposure initiated before fertilization apparently led to more Cd(2+) deposition in the chorion compared to the exposure during embryonated stages of the eggs. Similarly, values for total Cd(2+) indicated higher concentrations in those eggs exposed prior to--and during--water hardening. Results suggest an alteration of the properties of the zona radiata in the early-stage eggs, making it more permeable to the potential exit or entrance of waterborne agents even after water hardening. Ongoing studies must now address the development of more realistic exposure conditions of the gametes by using incubation media with osmolarities similar to surface waters, and by shortening duration for gamete exposure. Also, sensitive methods to localize Cd(2+) and to delineate the transfer from the chorion to the embryo are needed.     

Temporal-spatial trends in heavy metal contents in sediment-derived soils along the Sea Scheldt river (Belgium)

The aim of this study was to survey the alluvial plains of the Sea Scheldt river in Belgium for the presence of old sediment-derived soils, and to appraise the heavy metal contamination at these sites. Historically, sediments of periodical dredging operations have been disposed in the alluvial plain without concern for the potential presence of contaminants. Up to 96% of the areas that were affected by sediment disposal (ca. 120 ha) was found to be polluted by at least one of the metals Cd, Cr, Zn or Pb. Concentrations of Cd, Cr and Zn were, in 10% of the cases, higher than 14, 1400 and 2200 mg/kg DM, respectively. Based on the Flemish decree on soil sanitation, Cu and Ni concentrations were of less environmental concern on any site. The pollution in the Sea Scheldt alluvial plain nevertheless is lower than for the Upper Scheldt alluvial plain. The sediment-derived soils in the most upstream part near Ghent were used for disposal of sediments from dredging operations elsewhere. Metal concentrations were explored and both spatial and temporal trend were analysed. The pollution levels encountered warrant caution as most of the soils affected by historical dredged sediment disposal are currently in use for pasture.     

Greening of arid cities by residual water reuse: a multidisciplinary project in northern Chile

This paper describes a project in northern Chile aimed to promote the development of appropriate green areas and gardens for arid regions under prevalent conditions of shortage of water and high salt content in soil and water. Field studies were conducted to test the suitability of selected salt-tolerant native and introduced plants for ornamental use. Plant growth, water and soil quality, marine spray, climate, wastewater treatment and irrigation operating problems were the subject of specific studies and discussion.     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Base cation deposition in europe-part I. Model description, results and uncertainties

Deposition of base cations (Na⁺, Mg²⁺, Ca²⁺, K⁺) in Europe was mapped for 1989 with a spatial resolution of 10 x 20 km using the so-called inferential modeling technique. Deposition fields resembled the geographic variability of sources, land-use and climate. Dry deposition constituted on average 45% of the total base cation deposition in Europe. Modeled deposition estimates compared reasonably well with deposition estimates derived from throughfall and bulk-precipitation measurements made at 174 sites scattered over Europe. Using error propagation, the random and systematic error in total deposition for an average grid cell of 10 x 20 km was estimated to equal 35–50% and 25–40%, respectively. Within individual grids a relatively large variability in deposition is expected.     

Variability of cadmium, copper and zinc levels in molluscs and associated sediments from Chile

The concentrations of cadmium, copper and zinc in mussel and sediment samples collected together from eight different geographical coastal areas of Chile were determined. The mussels studied were 'Chorito Maico', 'Almejas' and 'Navajuelas Chilenas' (Perumytilus purpuratus, Semelle solida and Tagellus dombeii, respectively). Sampling was carried out in July and September 1992 and January and April 1993 (winter, spring, summer and autumn seasons in Chile, respectively). The metal levels in these mussels varied among species; there were several sites where the metal concentrations in molluscs approached or exceeded the criteria levels for Cd, Cu and Zn in shellfish products: 1, 10 and 50 ppm ww respectively, which are regarded as safe levels for human consumption. The results of metal levels in sediments showed two areas clearly polluted with Cu. Strong relationships between Cu concentrations in the three molluscs and sediments were found; weak correlations were observed for Zn in S. solida.     

Comparative study on the susceptibility of freshwater species to copper-based pesticides

Copper compounds have been intentionally introduced into water bodies as aquatic plant herbicides, algicides and molluscicides. Copper-based fertilizers and fungicides have been widely used in agriculture as well. Despite the fact that copper is an essential element for all biota, elevated concentrations of this metal have been shown to affect a variety of aquatic organisms. Nonetheless, comparative studies on the susceptibility of different freshwater species to copper compounds have seldom been performed. This study was conducted to compare toxicity of copper-based pesticides (copper oxychloride, cuprous oxide and copper sulfate) to different freshwater target (Raphidocelis subcapitata, a planktonic alga and Biomphalaria glabrata, a snail) and non-target (Daphnia similis, a planktonic crustacean and Danio rerio, a fish) organisms. Test water parameters were as follows: pH = 7.4 +/- 0.1; hardness 44 +/- 1 mg/l as CaCO3; DO 8-9 mg/l at the beginning and > 4 mg/l at the end; temperature, fish and snails 25 +/- 1 degrees C, Daphnia 20 +/- 2 degrees C, algae 24 +/- 1 degrees C. D. similis (immobilization), 48-h EC50s (95% CLs) ranging from 0.013 (0.011-0.016) to 0.043 (0.033-0.057) mg Cu/l, and R. subcapitata (growth inhibition), 96-h IC50s from 0.071 (0.045-0.099) to 0.137 (0.090-0.174) mg Cu/l, were the most susceptible species. B. glabrata (lethality), 48-h LC50s from 0.179 (0.102-0.270) to 0.854 (0.553-1.457) mg Cu/l, and D. rerio (lethality), 48-h LC50s 0.063 (0.045-0.089), 0.192 (0.133-0.272) and 0.714 (0.494-1.016) mg Cu/l, were less susceptible than Daphnia to copper-based pesticides. Findings from the present study therefore suggest that increased levels of copper in water bodies is likely to adversely affect a variety of aquatic species.