Low intervention soil remediation approaches

Traditional bioremediation approaches have been used to treat petroleum source contamination in readily accessible soils and sludges. Contamination under existing structures is a greater challenge. Options to deal with this problem have usually been in the extreme (i.e., to dismantle the facility and excavate to an acceptable regulated residual, or to pump and treat for an inordinately long period of time). The excavated material must be further remediated and cleanfill must be added to close the excavation. If site assessments were too conservative or incomplete, new contamination adulterating fill soils may result in additional excavation at some later date. Innovative, cost-efficient technologies must be developed to remove preexisting wastes under structures and to reduce future remediation episodes. An innovative soil bioremediation treatment method was developed and evaluated in petroleum hydrocarbon contaminated (PHC) soils at compressor stations of a natural gas pipeline running through Louisiana. The in-situ protocol was developed for remediating significant acreage subjected to contamination by petroleum-based lubricants and other PHC products resulting from a chronic leakage of lubricating oil used to maintain the pipeline itself. Initial total petroleum hydrocarbon (TPH) measurements revealed values of up to 12,000 mg/kg soil dry weight. The aim of the remediation project was to reduce TPH concentration in the contaminated soils to a level of <200 mg/kg soil dry weight, a level negotiated to be acceptable to state and federal regulators. After monitoring the system for 122 days, all sites showed greater than 99-percent reduction in TPH concentration.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.     

WATER MARKETS AND DECENTRALIZED WATER RESOURCES MANAGEMENT: INTERNATIONAL PROBLEMS AND OPPORTUNITIES1

ABSTRACT: Because of its importance and the perceived inability of private sector sources to meet water demands, many countries have depended on the public sector to provide water services for their populations. Yet this has resulted in many inefficient public water projects and in inadequate supplies of good quality and reliable water. Decentralization of water management, including the use of water markets, cannot solve all of these water problems, but it can improve the efficiency of water allocation. When given adequate responsibility and authority, water user associations have effectively taken over water management activities at a savings to tax payers. Moreover, water markets add the potential benefit of improving water efficiency within a sector as well as providing a mechanism for reallocating water among sectors. The key question involves developing innovative mechanisms for reducing the transaction costs of organizing water users and of making water trades. Water rights need to be established which are recorded, tradable, enforceable, and separate from land if markets are to operate effectively. Also, institutions are needed that effectively resolve conflicts over water rights, including third party impacts and water quality concerns.     

Satisfaction with a performance appraisal system and appraisal discussion

Satisfaction with a performance appraisal system and the appraisal discussion was assessed by questionnaires administered to a random sample of managers and employees in a large multinational corporation. Stepwise regression and cross validation analyses were used to identify reliable linear composites for managers (n = 222) and employees (n = 368) on two dependent measures: overall experience with the appraisal system, and quality of the appraisal discussion. The results indicated differences in the aspects of the appraisal process which are related to satisfaction with the appraisal discussion, compared to satisfaction with the overall appraisal system. The results also indicated differences between managers' and employees' opinions regarding the appraisal system. Managers were found to be more satisfied than employees with most aspects of the appraisal system. And, the aspects of the appraisal system which were related to managers' and employees' satisfaction with the appraisal discussion were substantially different.     

ECONOMIC RESOURCE MULTIPLIERS FOR REGIONAL IMPACT ANALYSIS1

ABSTRACT: Tradeoffs between regional economic development and resource use is a question often confronting local decisionmakers. A resource-interindustry model can be used to depict the interrelationships between regional economic sectors as to household income and/or employment and resource use. A resource-interindustry model was developed for Humboldt and Lander Counties in Nevada which shows the tradeoffs between regional household income (wages, salaries, profits, and rents) and/or employment and water usage. Water income and water employment multipliers can be ranked, enabling decisionmakers to realize sectors which require greatest regional water usage to regional household income and/or employment.     

Designating Air Quality Management Areas (AQMAs) in the UK Implications for Securing UK Air Quality Objectives

Across the United Kingdom, the majority of local authoritieshave now completed their first phase of local air qualityreview and assessment work, as required under the AirQuality Strategy for England, Scotland, Wales and NorthernIreland (DETR, 2000a). Emerging from this first phasework is an anticipated suite of over 110 Air QualityManagement Areas (AQMAs). These areas are identifiedlocations where one or more of the national air qualityobjectives are predicted to exceed by specific target dates,and their spatial extent and shape is emerging as highlyvariable. Local authorities are guided to use a variety ofscientific tools to underpin the scientific assessments, anda consideration of uncertainty in both the tools used andsubsequent delineation of AQMAs is likely to affect theemerging management areas significantly. With subsidiarity underpinning the process of local air qualitymanagement (LAQM), local decision-making is anticipated toinfluence the outcome of the LAQM process in its entirety,with the declaration of AQMAs necessitating the preparationand implementation of air quality action plans. UKexperience of the effective management of local air quality,through the designation of AQMAs, demonstrates a valuableframework for other European countries developing mechanismsto manage air quality locally.     

Chemical Changes in Sediment Pore-Waters of an Acidic Mining Lake After Addition of Organic Substrate and Lime for Stimulating Lake Remediation

In the past five years, enclosures have beeninstalled in an acidic mining lake in Lusatia to investigate insitu remediation processes. They were treated with straw, withstraw and Carbokalk, or with Carbokalk alone, where Carbokalkis a by-product of the sugar industry (solid precipitate ofnon-sugars after lime clarification of extracted sugar beetjuice). Sediment samples were taken as cores to get informationabout the behaviour of organic and inorganic components insediment pore-water with depth. Vertical distributions of pH,soluble reactive phosphate, nitrate, ammonium, silica,aluminium, iron, manganese, calcium, magnesium, sodium,potassium, sulphate, and DOC were measured. The resultingprofiles, each consisting of 15 data points at differentdepths, were compared by cluster analysis. The similarities ofsediment cores from different treated enclosures relating toprofiles of chemical components were discussed. Increasedconcentrations of potassium and sulphate were found in pore-water after substrate treatment. The data imply dissolution ofpotassium iron sulphate hydroxide minerals (jarosite) after anincrease of pH caused by dissolution of lime and by sulphatereducing processes which were stimulated by organic substrateaddition.