Patterns and levels of halogenated volatile compounds in Portuguese surface waters

The present study focused on monitoring the concentration of 14 halogenated volatile organic compounds in surface waters, including sea, estuarine, river water and industrial effluents in order to determine the most ubiquitous compounds and their concentration levels, which were used to establish their geographical and temporal distribution. EPA Method 502, based on purge and trap techniques, was used. In this method volatile organic pollutants are extracted (purged) from the water sample by bubbling inert gas through the aqueous sample. Purged sample components are trapped in a cartridge containing the polymeric sorbent Tenax and, thereafter, the cartridge is heated and backflushed with helium to desorb the trapped sample components directly into a gas chromatograph with electron capture detector (GC-ECD). The linearity range of the method varied from 0.1 to 4 microg L(-1) with a limit of detection at the low microg L(-1) level. The present study consisted of a monthly monitoring of 46 points throughout Portugal, during 14 months. Chloroform was found in 50% of the samples analyzed, its presence being correlated to both agricultural and industrial activities. Other compounds detected were tetrachloroethylene, trichloroethylene, carbon tetrachloride and 1,2,4 trichlorobenzene, which were present in 10-20% of the samples at concentrations up to 18 microg L(-1). 1,1,2,2-Tetrachloroethane and its degradation product 1,1,2-trichloroethane were found in 5% of the samples, the levels of the latter being higher than those of the parent compound in most samples. Sporadic high concentrations of some volatile halogenated organic compounds were attributed to local uses as solvents.     

Satellite image analysis of human caused changes in the tundra vegetation around the city of Vorkuta,north-European Russia

In this paper we present what kind of human impacted changes can be found in dwarf birch (Betula nana) dominated shrub tundra vegetation around the large industrial complex of Vorkuta in the north-European Russian tundra. Using fieldwork data and Landsat TM satellite image we could identify two impact zones: (1) Pollution zone (150-200 km2). In this zone most of the lichen species are absent. Changes in vegetation communities' species composition in all main plant groups are obvious. Willows especially are more dominant than in the unpolluted sites. (2) Slight pollution/disturbance zone (600-900 km2). Here vegetation changes are mainly similar but less so than the changes in the first zone. Particularly, the amount of herbs and grasses is increased when compared to unpolluted areas. The pollution zones are spatially connected to the main emission sources in the area. Zones spread furthest to the northeast, matching the prevailing winds during winter.     

Volatile organic compounds produced during the aerobic biological processing of municipal solid waste in a pilot plant

The volatile organic carbon (VOC) and odours emitted during the aerobic biological processing of municipal solid waste (MSW) was studied in a pilot-scale reactor. VOCs were detected by different techniques on solid waste samples and the outlet air stream, before and after a biofilter. Organic compounds (alpha-pinene, beta-myrcene, D-limonene) were also measured in condensate water and leachate from the process. Results showed uniformity in the composition of the air in the solid waste samples, air sampled during the process and condensed water, indicating a matrix-derived origin of these compounds. Leachates, however, contained substances with a quite different molecular structure from the compounds identified in the gaseous fraction. Most of the substances in the gaseous effluent had a hydrocarbon-like structure, mainly terpenoids. The odour produced and detected through olfactometry agreed with GC-MS analyses. This was true above all for terpenes.     

Detection of ciliostatic activity in fungal growth on building materials

Varying ciliostatic activity was found in extracts of biomass from building materials inoculated with pure isolates of some molds previously isolated from buildings. Extracts from growth on materials composed of finely divided cellulose (plaster board and construction cardboard) were more active than those from growth on Rockwool. Extracts of biomass from all three materials demonstrated an activity greater than control samples. Based on the activity observed here, it is conceivable that the measurement of ciliostatic activity of biomass scraped from contaminated building materials could be useful for planning removal strategies.     

Sterols in sediment samples from Venice Lagoon, Italy

Sterols of different origin were analysed in sediment samples collected in the Venice Lagoon. The purpose of the study was to investigate the degree of sewage contamination within the Lagoon using fecal sterols (coprostanol, epicoprostanol and coprostanone) and to analyse the pattern of the sterols to plot the origin of the organic matter.

Sedimentary coprostanol at Canal Grande within the city of Venice was more than one order of magnitude higher than other stations in the Lagoon and two orders higher than in a sediment sample collected in the open sea. The cholesterol/coprostanol ratio, like the percentage of coprostanol in total sterols at this sample site was very similar to values in sewage sludge. The different pattern of sterols at station 2 which had the largest amount of total sterol indicates a difference in the origin of the organic material. Nevertheless the sterols used as tracer of terrestrial vascular plants did not show any particular trend at this station, receiving fresh water inputs. (3-Sitosterol and cholestanol reached the highest levels at the station within the Chioggia basin.     

Determination of the temperature dependence of water solubilities of polycyclic aromatic hydrocarbons by a generator column-on-line solid-phase extraction-liquid chromatographic method

An improved dynamic coupled column liquid chromatographic (DCCLC) technique for determining water solubility data of hydrophobic compounds is presented. The technique is based on pumping water through a thermostated generator column in order to generate emulsion-free, saturated aqueous solutions of the compound under study. Through a switching valve system the solute in the aqueous solution is extracted and concentrated by an on-line solid-phase extraction process and subsequently eluted and analyzed by high performance liquid chromatography (fluorescence detection coupled to photodiode array detection). The improvements carried out to the original DCCLC technique have given rise to savings in time for the experimental work and increased sensitivity during the detection and quantification stage. Applicability of the method for studying highly hydrophobic substances is demonstrated by determining water solubility of anthracene and pyrene in the temperature range of 8.9-49.9 and 8.5-32.2 degrees C, respectively. The measured water solubilities are in good agreement with the best available literature data. The method has also been applied to the determination of water solubility of m-terphenyl, 9, 10-dihydrophenanthrene and guaiazulene, in the temperature range of 4.8-49.9, 4.8-25.0, and 4.5-29.9 degrees C, respectively. The uncertainty in the Sw values determined in this work ranged from 0.7% to 4.6%. The experimental water solubility data, as a function of temperature, are fitted to the equation In Sw = A + B/T; where Sw and T are given in mole fraction and Kelvin, respectively.     

Ion exchange treatment of rinse water generated in the galvanizing process.

A study was conducted of the viability of using the cationic exchange resins Amberlite IR-120 and Lewatit SP-112 to treat rinse water generated in the galvanizing process as well as acidic wastewater containing zinc (Zn) and iron (Fe). Solutions containing either 100 mg/L of Zn at pH 5.6 (rinse water) or Fe and Zn at concentrations of 320 and 200 mg/L at pH 1.5 (acidic water), respectively, were percolated through packed beds until the resins were exhausted. Breakthrough capacities obtained ranged between 1.1 and 1.5 meq metal/mL resin. The elution of metal and the regeneration of resins were performed with hydrochloric acid. The influence of the flowrate used during the loading stage was also studied, with 0.5 bed volumes/min (3.2 cm/min) found to be the optimum flowrate.     

Geographic assignment of seabirds to their origin: combining morphologic, genetic, and biogeochemical analyses.

Longline fisheries, oil spills, and offshore wind farms are some of the major threats increasing seabird mortality at sea, but the impact of these threats on specific populations has been difficult to determine so far. We tested the use of molecular markers, morphometric measures, and stable isotope (delta15N and delta13C) and trace element concentrations in the first primary feather (grown at the end of the breeding period) to assign the geographic origin of Calonectris shearwaters. Overall, we sampled birds from three taxa: 13 Mediterranean Cory's Shearwater (Calonectris diomedea diomedea) breeding sites, 10 Atlantic Cory's Shearwater (Calonectris diomedea borealis) breeding sites, and one Cape Verde Shearwater (C. edwardsii) breeding site. Assignment rates were investigated at three spatial scales: breeding colony, breeding archipelago, and taxa levels. Genetic analyses based on the mitochondrial control region (198 birds from 21 breeding colonies) correctly assigned 100% of birds to the three main taxa but failed in detecting geographic structuring at lower scales. Discriminant analyses based on trace elements composition achieved the best rate of correct assignment to colony (77.5%). Body measurements or stable isotopes mainly succeeded in assigning individuals among taxa (87.9% and 89.9%, respectively) but failed at the colony level (27.1% and 38.0%, respectively). Combining all three approaches (morphometrics, isotopes, and trace elements on 186 birds from 15 breeding colonies) substantially improved correct classifications (86.0%, 90.7%, and 100% among colonies, archipelagos, and taxa, respectively). Validations using two independent data sets and jackknife cross-validation confirmed the robustness of the combined approach in the colony assignment (62.5%, 58.8%, and 69.8% for each validation test, respectively). A preliminary application of the discriminant model based on stable isotope delta15N and delta13C values and trace elements (219 birds from 17 breeding sites) showed that 41 Cory's Shearwaters caught by western Mediterranean long-liners came mainly from breeding colonies in Menorca (48.8%), Ibiza (14.6%), and Crete (31.7%). Our findings show that combining analyses of trace elements and stable isotopes on feathers can achieve high rates of correct geographic assignment of birds in the marine environment, opening new prospects for the study of seabird mortality at sea.     

Who participates in conservation initiatives? Case studies in six rural communities of Mexico

Previous studies attempting to explain the factors that determine local participation in conservation initiatives have concluded that socio-political exclusion is the main barrier to being involved in such initiatives. Such studies have not differentiated between different types of conservation initiatives. In this paper, we contribute to the literature analyzing the socio-cultural correlates of participation, by differentiating between participation in three types of conservation schemes: protected areas, payment for environmental services, and community conservation. We use data obtained from six rural communities in Mexico, where different combinations of conservation schemes are found. Through linear regression analysis, we explore the relationship between participation and (1) the community of residence; (2) demographics; and (3) socioeconomic characteristics of individuals. Our results suggest that local participation in conservation strategies depends, to a large extent, on the socio-political context in which they are embedded and that the exclusion of women and young adults is clearly consistent.     

Groundwater dependent ecosystems. Part I: Hydroecological status and trends

Groundwater dependent ecosystems (GDEs) include valuable ecosystems such as springs, wetlands, rivers, lakes and lagoons. The protection of these systems and services they provide is highlighted by international agreements, i.e. Ramsar convention on wetlands, and regional legislation, i.e. the European Water Framework Directive. Groundwater provides water, nutrients and a relatively stable temperature. However, the role of groundwater in surface ecosystems is not fully understood. The ecosystem can depend on groundwater directly or indirectly, and the reliance can be continuous, seasonal or occasional. This has implications for the vulnerability of ecosystems, as some may be easily affected by external pressure. Conceptual models and quantitative assessments of how groundwater interacts with the environment are needed. GDEs are also threatened by different land use activities and climate change. Hence, we need to understand how GDEs are affected by changes in groundwater quantity and quality, as severe groundwater changes have been observed in many regions. This study examines key aspects of GDEs (hydrogeology, geochemistry and biodiversity) in order to improve conceptual understanding of the role of groundwater in such ecosystems. The status and baseline of different types of GDEs are discussed, with particular emphasis on past evidence of environmental change and potential thresholds and threats in GDEs in various parts of Europe with different land use, climate and geology.