A quantitative review of the effects of biochar application to soils on crop productivity using meta-analysis

Increased crop yield is a commonly reported benefit of adding biochar to soils. However, experimental results are variable and dependent on the experimental set-up, soil properties and conditions, while causative mechanisms are yet to be fully elucidated. A statistical meta-analysis was undertaken with the aim of evaluating the relationship between biochar and crop productivity (either yield or above-ground biomass). Results showed an overall small, but statistically significant, benefit of biochar application to soils on crop productivity, with a grand mean increase of 10%. However, the mean results for each analysis performed within the meta-analysis covered a wide range (from −28% to 39%). The greatest (positive) effects with regard to soil analyses were seen in acidic (14%) and neutral pH soils (13%), and in soils with a coarse (10%) or medium texture (13%). This suggests that two of the main mechanisms for yield increase may be a liming effect and an improved water holding capacity of the soil, along with improved crop nutrient availability. The greatest positive result was seen in biochar applications at a rate of 100 t ha⁻¹ (39%). Of the biochar feedstocks considered and in relation to crop productivity, poultry litter showed the strongest (significant) positive effect (28%), in contrast to biosolids, which were the only feedstock showing a statistically significant negative effect (−28%). However, many auxiliary data sets (i.e. information concerning co-variables) are incomplete and the full range of relevant soil types, as well as environmental and management conditions are yet to be investigated. Furthermore, only short-term studies limited to periods of 1 to 2 years are currently available. This paper highlights the need for a strategic research effort, to allow elucidation of mechanisms, differentiated by environmental and management factors and to include studies over longer time frames.     

Suitable environmental areas for commercial timber in the state of Rio de Janeiro,Southeastern Brazil

Environment, Development and Sustainability - In state of Rio de Janeiro, the Southeast Region of Brazil, 97.91% of the reforested areas contain exclusively species of Pinus and Eucalyptus. Due to...     

Experiences from harvest-driven conservation: Management of Amazonian river turtles as a common-pool resource

Understanding what causes variability in the outcomes of common-pool resources management and governance has important policy implications for biodiversity conservation, in particular for the conservation of wild plants and animals subject to harvest. We report an exploratory study focusing on Amazonian river turtles as a common-pool resource under harvest-driven conservation and management efforts in Peru. Based on document analysis, literature review and a series of interviews, we describe the management program as a social process and identify the most important governance and management outcomes achieved (increased turtle abundance and benefits for harvesters, harvester formalization), factors hindering and facilitating the program implementation (four natural and three societal factors), and key governance actions behind the program outcomes (awareness and capacity building, crafting and enforcing rules). We then highlight the existing knowledge gaps and the needs and possible means to address particular risks related to turtle management on a harvest-driven setting.     

Magnetic signature,geochemistry, and oral bioaccessibility of “technogenic” metals in contaminated industrial soils from Sindos Industrial Area,Northern Greece

The objective of this study was to assess the contamination level of potentially harmful elements (PHEs) in industrial soils and how this relates to environmental magnetism. Moreover, emphasis was given to the determination of the potential mobile fractions of typically “technogenic” metals. Therefore, magnetic and geochemical parameters were determined in topsoils (0–20 cm) collected around a chemical industry in Sindos Industrial Area, Thessaloniki, Greece. Soil samples were presented significantly enriched in “technogenic” metals such Cd, Pb, and Zn, while cases of severe soil contamination were observed in sampling sites north-west of the industrial unit. Contents of Cd, Cr, Cu, Ni, Pb, Mo, Sb, Sn, and Zn in soils and pollution load index (PLI) were highly correlated with mass specific magnetic susceptibility (χ _lf). Similarly, enrichment factor (EF) and geoaccumulation index (I _geo) for “technogenic” Pb and Zn exhibited high positive correlation factors with χ _lf. Principal component analysis (PCA) classified PHEs along with the magnetic variable (χ _lf) into a common group indicating anthropogenic influence. The water extractable concentrations were substantially low, while the descending order of UBM (Unified BARGE Method) extractable concentrations in the gastric phase was Zn > Pb > As > Cd, yet Cd showed the highest bioaccessibility (almost 95%).

     

Effects of air/fuel ratio on gas emissions in a small spark-ignited non-road engine operating with different gasoline/ethanol blends

This study investigates the effects of several blends of gasoline and anhydrous ethanol on exhaust emission concentrations of carbon monoxide (CO), total hydrocarbons (HCs), and nitrogen oxides (NO_x) from a small spark-ignited non-road engine (SSINRE). Tests were carried out for different air/fuel equivalence ratios as measured by lambda (λ). A 196 cm³ single-cylinder four-stroke engine-generator operating at a constant load of 2.0 kW was used; pollutant gas concentrations were measured with an automatic analyzer similar to those typically used in vehicle inspections. The results showed that as the ethanol content of the mixture increased the concentrations of CO, HCs, and NO_x reduced by 15, 53, and 34%, respectively, for values of λ < 1 (rich mixture) and by 52, 31, and 16% for values of λ > 1 (lean mixture). Overall, addition of anhydrous ethanol to the gasoline helped to reduce emissions of the pollutant gases investigated, what contributes to photochemical smog reduction and quality of life in urban areas.     

Stomatal characteristics and infection biology of Pyrenopeziza betulicola in Betula pendula trees grown under elevated CO2 and O3

Two silver birch clones were exposed to ambient and elevated concentrations of CO₂ and O₃, and their combination for 3 years, using open-top chambers. We evaluated the effects of elevated CO₂ and O₃ on stomatal conductance (g_s), density (SD) and index (SI), length of the guard cells, and epidermal cell size and number, with respect to crown position and leaf type. The relationship between the infection biology of the fungus (Pyrenopeziza betulicola) causing leaf spot disease and stomatal characteristics was also studied. Leaf type was an important determinant of O₃ response in silver birch, while crown position and clone played only a minor role. Elevated CO₂ reduced the g_s, but had otherwise no significant effect on the parameters studied. No significant interactions between elevated CO₂ and O₃ were found. The infection biology of P. betulicola was not correlated with SD or g_s, but it did occasionally correlate positively with the length of the guard cells.     

Oxidative transformation of polybrominated diphenyl ether congeners (PBDEs) and of hydroxylated PBDEs (OH-PBDEs)

BACKGROUND, AIM, AND SCOPE: The historical and widespread use of polybrominated diphenyl ethers (PBDEs) as flame retardants in consumer products worldwide has caused PBDEs to now be regarded as pervasive environmental contaminants. Most recently, hydroxylated PBDEs (OH-PBDEs) and methoxylated PBDEs (MeO-PBDEs) have emerged as environmentally relevant due to reports of their natural production and metabolism. An important parameter for assessing the environmental impact of a chemical substance is persistence. By formulating the concept that persistence is the result of the substance's physicochemical properties and chemical reactivity, Green and Bergman have proposed a new methodology to determine the inherent persistence of a chemical. If persistence could be predicted by straightforward methods, substances with this quality could be screened out before large-scale production/manufacturing begins. To provide data to implement this concept, we have developed new methodologies to study chemical transformations through photolysis; hydrolysis, substitution, and elimination; and via oxidation. This study has focused on adapting an oxidative reaction method to be applicable to non-water soluble organic pollutants. MATERIALS AND METHODS: PBDEs and one MeO-PBDE were dissolved in tetrahydrofuran/methanol and then diluted in alkaline water. The OH-PBDEs were dissolved in alkaline water prior to reaction. The oxidation degradation reaction was performed at 50 degrees C using potassium permanganate as described elsewhere. The pH was maintained at 7.6 with disodium hydrogen phosphate and barium hydrogen phosphate, the latter also serving as a trapping agent for manganate ions. The oxidation reactions were monitored by high-performance liquid chromatography and reaction rates were calculated. RESULTS: The OH-PBDEs have very fast oxidative transformation rates compared to the PBDEs. The reaction rates seem to be primarily dependent on substitution pattern of the pi-electron-donating bromine substituents and of bromine content. There are indications that further reactions of OH-PBDEs, e.g., methylation to the MeO-PBDEs, decrease the oxidation rates, and thereby generate more persistent substances. DISCUSSION: The resistance of PBDEs to oxidation, a major degradation pathway in air, should be further investigated, since these compounds do undergo long range transport. With slight modifications, the original method has been adapted to include a larger variety of chemical substances, and preliminary data are now available on the oxidative transformation rates for PBDEs and of OH-PBDEs. CONCLUSIONS: The original oxidation degradation method can now include non-water soluble compounds. This modification, using low concentrations of test chemicals, allows us to measure oxidative transformation rates, for some of the lower brominated DEs, data that can be used to assess their persistence in future model calculations. Oxidative transformation rates for PBDEs are slow compared to those for the OH-PBDEs. This suggests that OH-PBDEs, when released into the environment, undergo faster oxidative metabolism and excretion than the PBDEs. RECOMMENDATIONS AND PERSPECTIVES: To evaluate the modified method, more degradation reactions with non-water soluble compounds should be investigated. Recent studies show that OH-PBDEs are present in rats and in humans and, because of their activity as endocrine disruptors, determining their subsequent environmental fate is of importance. The resistance of PBDEs to oxidative degradation should be acknowledged as of possible future concern. Several other compound classes (such as polychlorinated biphenyls (PCBs), hydroxylated polychlorinated biphenyls (OH-PCBs), and pharmaceuticals) need to be subjected to this screening method to increase the database of transformation rates that can be used with this model.     

Insect herbivory may cause changes in the visual properties of leaves and affect the camouflage of herbivores to avian predators

Behavioral Ecology and Sociobiology - An individual’s metabolic competence is important when escalating to costly behaviours in agonistic encounters. The use of broken shells in the wild...     

Anaerobic digestion of autoclaved and untreated food waste

Anaerobic digestion of autoclaved (160 °C, 6.2 bar) and untreated source segregated food waste (FW) was compared over 473 days in semi-continuously fed mesophilic reactors with trace elements supplementation, at organic loading rates (OLRs) of 2, 3, 4 and 6 kg volatile solids (VS)/m³ d. Methane yields at all OLR were 5–10% higher for untreated FW (maximum 0.483 ± 0.013 m³ CH₄/kg VS at 3 kg VS/m³ d) than autoclaved FW (maximum 0.439 ± 0.020 m³ CH₄/kg VS at 4 kg VS/m³ d). The residual methane potential of both digestates at all OLRs was less than 0.110 m³ CH₄/kg VS, indicating efficient methanation in all cases. Use of acclimated inoculum allowed very rapid increases in OLR. Reactors fed on autoclaved FW showed lower ammonium and hydrogen sulphide concentrations, probably due to reduced protein hydrolysis as a result of formation of Maillard compounds. In the current study this reduced biodegradability appears to outweigh any benefit due to thermal hydrolysis of ligno-cellulosic components.