DNA Heat Treatment for Improving qPCR Analysis of Human Adenovirus in Wastewater

PCR inhibitory substances in complex sample matrices can cause false negatives or under-estimation of target concentration. This study assessed DNA heat treatment for reducing inhibition during qPCR analysis of human adenovirus (HAdV) in wastewater samples. Inhibition was reduced by heat treating DNA, where mean HAdV concentration was increased by 0.71 log₁₀ GC/L (and up to 3.04 log₁₀ GC/L in one case), and replicate variability and false negatives were reduced. DNA heat treatment should be further investigated for improving reliability of HAdV concentration estimates in water, which can support more accurate assessment of health risks associated with viral pathogen exposure.     

Assessment and Evaluation of an Integrated Hybrid Anaerobic–Aerobic Sewage Treatment System for the Removal of Enteric Viruses

The capability of a cost-effective and a small size decentralized pilot wastewater treatment plant (WWTP) to remove enteric viruses such as rotavirus, norovirus genogroup I (GGI), norovirus genogroup II (GGII), Hepatitis E virus (HEV), and adenovirus was studied. This pilot plant is an integrated hybrid anaerobic/aerobic setup which consisted of anaerobic sludge blanket (UASB), biological aerated filter (BAF), and inclined plate settler (IPS). Both the UASB and BAF are packed with a non-woven polyester fabric (NWPF). Results indicated that the overall log₁₀ reductions of enteric viruses’ genome copies through the whole system were 3.1 ± 1, 3.3 ± 0.5, and 2.6 ± 0.9 log₁₀ for rotavirus, norovirus GGI, and adenovirus, respectively. Reduction efficiency for both norovirus GGII and HEV after the different treatment steps could not be calculated because there were no significant numbers of positive samples for both viruses. The overall reduction of rotavirus infectious units through the whole system was 2.2 ± 0.8 log₁₀ reduction which is very close to the overall log₁₀ reduction of adenovirus infectious units through the whole system which was 2.1 ± 0.8 log₁₀ reduction. There was no considerable difference in the removal efficiency for different rotavirus G and P types. Adenovirus 41 was the only type detected in the all positive samples. Although the pilot WWTP investigated is cost effective, has a small footprint, does not need a long distance network pipes, and easy to operate, its efficiency to remove enteric viruses is comparable with the conventional centralized WWTPs.     

Pollination syndromes ignored: importance of non-ornithophilous flowers to Neotropical savanna hummingbirds

Generalization prevails in flower–animal interactions, and although animal visitors are not equally effective pollinators, most interactions likely represent an important energy intake for the animal visitor. Hummingbirds are nectar-feeding specialists, and many tropical plants are specialized toward hummingbird-pollination. In spite of this, especially in dry and seasonal tropical habitats, hummingbirds may often rely on non-ornithophilous plants to meet their energy requirements. However, quantitative studies evaluating the relative importance of ornithophilous vs. non-ornithophilous plants for hummingbirds in these areas are scarce. We here studied the availability and use of floral resources by hummingbirds in two different areas of the Cerrado, the seasonal savannas in Central Brazil. Roughly half the hummingbird visited plant species were non-ornithophilous, and these contributed greatly to increase the overall nectar availability. We showed that mean nectar offer, at the transect scale, was the only parameter related to hummingbird visitation frequency, more so than nectar offer at single flowers and at the plant scale, or pollination syndrome. Centrality indices, calculated using hummingbird–plant networks, showed that ornithophilous and non-ornithophilous plants have similar importance for network cohesion. How this foraging behaviour affects reproduction of non-ornithophilous plants remains largely unexplored and is probably case specific, however, we suggest that the additional energy provided by non-ornithophilous plants may facilitate reproduction of truly ornithophilous flowers by attracting and maintaining hummingbirds in the area. This may promote asymmetric hummingbird–plant associations, i.e., pollination depends on floral traits adapted to hummingbird morphology, but hummingbird visitation is determined more by the energetic "reward" than by pollination syndromes.     

Tolerating an infection: an indirect benefit of co-founding queen associations in the ant Lasius niger

Pathogens exert a strong selection pressure on organisms to evolve effective immune defences. In addition to individual immunity, social organisms can act cooperatively to produce collective defences. In many ant species, queens have the option to found a colony alone or in groups with other, often unrelated, conspecifics. These associations are transient, usually lasting only as long as each queen benefits from the presence of others. In fact, once the first workers emerge, queens fight to the death for dominance. One potential advantage of co-founding may be that queens benefit from collective disease defences, such as mutual grooming, that act against common soil pathogens. We test this hypothesis by exposing single and co-founding queens to a fungal parasite, in order to assess whether queens in co-founding associations have improved survival. Surprisingly, co-foundresses exposed to the entomopathogenic fungus Metarhizium did not engage in cooperative disease defences, and consequently, we find no direct benefit of multiple queens on survival. However, an indirect benefit was observed, with parasite-exposed queens producing more brood when they co-founded, than when they were alone. We suggest this is due to a trade-off between reproduction and immunity. Additionally, we report an extraordinary ability of the queens to tolerate an infection for long periods after parasite exposure. Our study suggests that there are no social immunity benefits for co-founding ant queens, but that in parasite-rich environments, the presence of additional queens may nevertheless improve the chances of colony founding success.     

Simulations and experiments in punching spring-steel devices with sub-millimeter features

This work demonstrates the feasibility of meso-scale (100 μm to mm) punching of multiple holes of intricate shapes in metals. Analytical modeling, finite element (FE) simulation, and experimentation are used in this work. Two-dimensional FE simulations in ABAQUS were done with an assumed material modeling and plane-strain condition. A known analytical model was used and compared with the ABAQUS simulation results to understand the effects of clearance between the punch and the die. FE simulation in ABAQUS was done for different clearances and corner radii of the punch, die, and holder. To complement modeling with real experiments and for the purpose of comparison, a set of punches and dies were made to punch out a miniature spring-steel gripper. Comparison of compliant grippers made by wire-cut electro discharge machining (EDM) and punching shows that realizing sharp interior and re-entrant corners by punching is not easy to achieve. However, the promise of realizing meso-scale parts with complicated shapes through punching is demonstrated in this work; and further work is identified and some strategies are suggested for improvement. The main contribution of this paper is in adapting the well-established punching and blanking operations to the meso-scale as a viable alternative to making miniature devices currently dominated by lithography-based techniques.     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.     

Detection Method for Avian Influenza Viruses in Water

Recent events have shown that humans may become infected with some pathogenic avian influenza A viruses (AIV). Since soil and water, including lakes, rivers, and seashores, may be contaminated by AIV excreted by birds, effective methods are needed for monitoring water for emerging viruses. Combining water filtration with molecular methods such as PCR is a fast and effective way for detecting viruses. The objective of this study was to apply a convenient method for the detection of AIV in natural water samples. Distilled water and lake, river, and seawater were artificially contaminated with AIV (H5N3) and passed through a filter system. AIV was detected from filter membrane by real-time RT-PCR. The performance of Zetapor, SMWP, and Sartobind D5F membranes in recovering influenza viruses was first evaluated using contaminated distilled water. SWMP, which gave the highest virus recoveries, was then compared with a pre-filter combined GF/F filter membrane in a trial using natural water samples. In this study, the cellulose membrane SMWP was found to be practical for recovery of AIVs in water. Viral yields varied between 62.1 and 65.9% in distilled water and between 1 and 16.7% in natural water samples. The borosilicate glass membrane GF/F combined with pre-filter was also feasible in filtering natural water samples with viral yields from 1.98 to 7.33%. The methods described can be used for monitoring fresh and seawater samples for the presence of AIV and to determine the source of AIV transmission in an outbreak situation.     

Prevalence of Norovirus Infection in Children and Adults with Acute Gastroenteritis,Tehran, Iran, 2008–2009

Noroviruses are one of important agents that cause acute viral gastroenteritis worldwide. These viruses are belonging to Caliciviridae family and are genetically diverse. To date, there is no valuable data about prevalence of norovirus infection and the dominant genogroup/genotype among Iranian population. The objective of this study was to determine the frequency of norovirus infection in Iranian patients with gastroenteritis referred to three hospitals of Tehran and to specify the dominant genogroup/genotype of this virus among our study population. A total of 293 patients with acute gastroenteritis were included in the study. Detection of norovirus was performed using RT-PCR method and confirmed by direct sequencing with specific designed primers for capsid region of norovirus genome. Phylogenetic analysis was performed using the neighbor-joining method. Norovirus strains identified in our study were subsequently categorized according to previously defined genogroup/genotypes. Of these, norovirus GII was dominant genogroup. Sixty-five percent (17 of 26) of positive samples were determined as GII and 35% (9 of 26) were determined as GI, respectively, in 2008–2009. And among 8 sequenced strains of genogroup II the most frequent genotype was GII.3. The results of this study indicated that norovirus must be considered as one of the infectious causes of acute gastroenteritis among Iranian population. We also found that GII.3 is more prevalent in our study population. To the best of our knowledge there is limited data about the role of noroviruses in children and adults’ acute gastroenteritis among Iranian patients and this prevalence and genotyping report of norovirus infection could be remarkable for further studies.