Factors affecting the implementation of green specifications in construction

Green specifications constitute one of the important elements in green construction. New sustainability requirements and changing priorities in construction management have spurred the emerging green specifications to a faster pace of development. A cross-sectional survey has been conducted in Hong Kong in 2007 to identify principal factors leading to the success of preparing green specifications. Based on extensive construction management literature, 20 variables concerning sustainable construction were summarized. Using the Mann–Whitney U-test, the subtle differences between stakeholders in specifying construction work have been detected even with the high consistency of the responses among the groups. Moreover, five independent factors for successful specification of green construction have been categorized by factor analysis. They are related to (1) green technology and techniques, (2) reliability and quality of specification, (3) leadership and responsibility, (4) stakeholder involvement, and (5) guide and benchmarking systems. Whilst the first and fourth factors are generally more important, different stakeholder groups have different emphases. The results of the survey have been validated against established principles.     

International Environmental Agreements: Design of Optimal Transfers Under Heterogeneity

International environmental agreements (IEAs) can coordinate abatement of transboundary pollutants. This paper investigates how heterogeneous countries facing a stock pollutant might structure such an agreement. In particular, we examine how an IEA might be implemented with a set of monetary transfers. The focus is on transfers that are time invariant, linear in emissions, and consistent with budget balance. There is a range of such schemes that would induce efficient emissions. We provide a simple and intuitive characterization of these penalties and describe how specific proposals might be chosen in order to facilitate compliance and implementation. Our proposals are illustrated with a simple example. We show that heterogeneity reduces the scope for penalty schemes to jointly satisfy desirable properties.     

Resembling a Viper: Implications of Mimicry for Conservation of the Endangered Smooth Snake

The phenomenon of Batesian mimicry, where a palatable animal gains protection against predation by resembling an unpalatable model, has been a core interest of evolutionary biologists for 150 years. An extensive range of studies has focused on revealing mechanistic aspects of mimicry (shared education and generalization of predators) and the evolutionary dynamics of mimicry systems (co‐operation vs. conflict) and revealed that protective mimicry is widespread and is important for individual fitness. However, according to our knowledge, there are no case studies where mimicry theories have been applied to conservation of mimetic species. Theoretically, mimicry affects, for example, frequency dependency of predator avoidance learning and human induced mortality. We examined the case of the protected, endangered, nonvenomous smooth snake (Coronella austriaca) that mimics the nonprotected venomous adder (Vipera berus), both of which occur in the Åland archipelago, Finland. To quantify the added predation risk on smooth snakes caused by the rarity of vipers, we calculated risk estimates from experimental data. Resemblance of vipers enhances survival of smooth snakes against bird predation because many predators avoid touching venomous vipers. Mimetic resemblance is however disadvantageous against human predators, who kill venomous vipers and accidentally kill endangered, protected smooth snakes. We found that the effective population size of the adders in Åland is very low relative to its smooth snake mimic (28.93 and 41.35, respectively).Because Batesian mimicry is advantageous for the mimic only if model species exist in sufficiently high numbers, it is likely that the conservation program for smooth snakes will fail if adders continue to be destroyed. Understanding the population consequences of mimetic species may be crucial to the success of endangered species conservation. We suggest that when a Batesian mimic requires protection, conservation planners should not ignore the model species (or co‐mimic in Mullerian mimicry rings) even if it is not itself endangered. Implications of mimicry for Conservation of the endangered smooth snake     

Evaluating the Quality of Citizen‐Scientist Data on Pollinator Communities

Abstract: Concerns about pollinator declines have grown in recent years, yet the ability to detect changes in abundance, taxonomic richness, and composition of pollinator communities is hampered severely by the lack of data over space and time. Citizen scientists may be able to extend the spatial and temporal extent of pollinator monitoring programs. We developed a citizen‐science monitoring protocol in which we trained 13 citizen scientists to observe and classify floral visitors at the resolution of orders or super families (e.g., bee, wasp, fly) and at finer resolution within bees (superfamily Apoidea) only. We evaluated the protocol by comparing data collected simultaneously at 17 sites by citizen scientists (observational data set) and by professionals (specimen‐based data set). The sites differed with respect to the presence and age of hedgerows planted to improve habitat quality for pollinators. We found significant, positive correlations among the two data sets for higher level taxonomic composition, honey bee (Apis mellifera) abundance, non‐Apis bee abundance, bee richness, and bee community similarity. Results for both data sets also showed similar trends (or lack thereof) in these metrics among sites differing in the presence and age of hedgerows. Nevertheless, citizen scientists did not observe approximately half of the bee groups collected by professional scientists at the same sites. Thus, the utility of citizen‐science observational data may be restricted to detection of community‐level changes in abundance, richness, or similarity over space and time, and citizen‐science observations may not reliably reflect the abundance or frequency of occurrence of specific pollinator species or groups.     

Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Engineered nanoparticles in wastewater and wastewater sludge – Evidence and impacts

Nanotechnology has widespread application in agricultural, environmental and industrial sectors ranging from fabrication of molecular assemblies to microbial array chips. Despite the booming application of nanotechnology, there have been serious implications which are coming into light in the recent years within different environmental compartments, namely air, water and soil and its likely impact on the human health. Health and environmental effects of common metals and materials are well-known, however, when the metals and materials take the form of nanoparticles – consequential hazards based on shape and size are yet to be explored. The nanoparticles released from different nanomaterials used in our household and industrial commodities find their way through waste disposal routes into the wastewater treatment facilities and end up in wastewater sludge. Further escape of these nanoparticles into the effluent will contaminate the aquatic and soil environment. Hence, an understanding of the presence, behavior and impact of these nanoparticles in wastewater and wastewater sludge is necessary and timely. Despite the lack of sufficient literature, the present review attempts to link various compartmentalization aspects of the nanoparticles, their physical properties and toxicity in wastewater and wastewater sludge through simile drawn from other environmental streams.     

Hydrolysis of organic matter during autoclaving of commingled household waste

Commingled household waste (HW) that had a controlled composition was autoclaved at elevated pressures in the presence of saturated steam for one hour at the nominal temperature levels of 130 °C, 160 °C and 200 °C. The focus of this study was the impact of temperature/pressure on hydrolysis of organic matter during autoclaving and the extent of its hydrolysis. The pH decreased with autoclaving temperature with which it had a linear relationship, and ranged from 7.4 and 6 in floc, and 6.7 and 3.6 in steam condensate. Overall, organic matter solubilisation, as indicated by dissolved organic carbon, biological and chemical oxygen demands, and total dissolved solids, increased with temperature. Lignin did not appear to hydrolyse. Hemicellulose hydrolysed and degraded the most, followed by cellulose. The highest recoveries of hemicellulose and cellulose in solution were achieved at 160 °C, although the latter could be due to experimental error. The largest losses of hemicellulose and cellulose were recorded at 200 °C. The performance of the system in respect to hydrolysis was inferior compared to other hydrothermal systems, particularly those employing wet oxidation.     

Assessing Sustainability at Multiple Scales in a Rotational Bushmeat Hunting System

Abstract: Results of many studies show unsustainable levels of bushmeat hunting across West/Central Africa. Nevertheless, these results are usually derived from snapshot sustainability indices in which critical parameters are often taken from the literature. Simple, more informative tools for assessing sustainability are needed. We evaluated the impact of bushmeat hunting across a range of temporal, spatial, and taxonomic scales in a comparison of different measures of sustainability. Over 15 months in 2002–2004 in and around a village close to Equatorial Guinea's Monte Alén National Park, we collected data via a village offtake survey, hunter‐camp bushmeat‐consumption diaries, hunter interviews, and following hunters during hunts. We compared 2003 data with a previous offtake survey (1998–1999) and interview reports back to 1990. In the past 14 years, average distance from the village at which hunters operated remained constant, with hunters switching back and forth between long‐established camps, although trapping effort increased. In the past 5 years, overall offtake and number of active hunters did not change substantially, although catch per unit effort (CPUE) decreased slightly. Although the proportion of the two most commonly trapped species (Cephalophus monticola and Atherurus africanus) and gun‐hunted primates increased in the offtake, species presumably less robust to trapping decreased slightly. Apparent sustainability in economic terms may be masking gradual local extirpation of more vulnerable species before and during this study. Our results suggest that changes in prey profiles and CPUE may be the most accurate indicators of actual sustainability; these indices can be monitored with simple village‐based offtake surveys and hunter interviews to improve community management of bushmeat hunting.