Occurrence and distribution of benzothiazole in the Schwarzbach watershed (Germany)

This study quantifies the regional distribution of the micropollutant benzothiazole (BT) in river water by sampling 15 river sites in the Schwarzbach watershed (about 400 km(2)) from November 2008 to February 2010. Additionally, wastewater samples from three municipal wastewater treatment plants (WWTPs) in Germany were analyzed. BT was detected in all wastewater influent and effluent samples as well as in all river water samples collected downstream of wastewater discharge. This corroborates the ubiquitous occurrence of BT in the aqueous environment. Concentrations were between 58 and 856 ng L(-1) in the river water. The observed mean concentration at the outlet of the investigated catchment was 109 ng L(-1). With only a few exceptions, temporal and spatial variations of BT concentrations in river water were low. Rather similar BT concentrations over a wide range of river discharge indicate that dilution along the mainstream is negligible and, thus, supports the hypothesis that paved surface runoff during rain events is an important BT source not only for wastewater influent but also for river water. This was supported by detecting the highest BT concentrations at sampling locations close to the dense highway network around the city of Frankfurt. Since BT was also detected in river water collected from locations that were clearly unaffected by wastewater effluent discharge, surface runoff must be considered as a diffuse source of BT in river water.     

Multiple environmental burdens and neighborhood-related health of city residents

Urban living environments are known to influence human well-being and health; however, little is known about the multidimensionality of different environmental burdens. The aim of this study is to examine the relations between multiple burdens and self-rated health of city residents in Berlin. A spatial analysis was conducted to determine neighborhood street blocks with high versus low levels of three environmental burdens (traffic noise, air pollution, lack of public green space) as study sites for a cross-sectional household questionnaire. Burden level served as a dichotomous predictor to compare residents' self-reports of neighborhood satisfaction, life satisfaction, health behavior, and psychological and physical health symptoms. Residents from high-burden blocks appraised the environmental conditions more stressful, reported poorer health behavior and were less satisfied with their neighborhood than residents from low-burden blocks. However, they did not differ in regard to more general health symptoms. Three other burdens (behavior-related noise, litter and dirt in public space, lack of urban vegetation), which could not be varied objectively, were assessed by their perceived intensity. Regression analyses of the relations between the perceived levels of all six burdens and outcomes in the total sample revealed the following: Neighborhood satisfaction could be predicted from multiple stressors and resources that co-occur independently, while more general health symptoms were related only to perceived air pollution. The results have implications for both urban planning and public health.     

Correction to: Effect of biosolid hydrochar on toxicity to earthworms and brine shrimp

Environmental Geochemistry and Health - Unfortunately, in the original publication of the article, Prof. Yong Sik Ok’s affiliation was incorrectly published. The author’s affiliation is...     

Hierarchical linear mixed models in multi-stage sampling soil studies

The issue of variances of different soil variables prevailing at different sampling scales is addressed. This topic is relevant for soil science, agronomy and landscape ecology. In multi-stage sampling there are randomness components in each stage of sampling which can be taken into account by introducing random effects in analysis through the use of hierarchical linear mixed models (HLMM). Due to the nested sampling scheme, there are several hierarchical sub-models. The selection of the best model can be carried out through likelihood ratio tests (LRTs) or Wald tests, which are asymptotically equivalent under standard conditions. However, when the comparison leads to a restricted hypothesis of variance components, standard conditions are not maintained, which leads to more elaborated versions of LRTs. These versions are not disseminated among environmental scientists. The present study shows the modeling of soil data from a sampling where sites, fields within sites, transects within fields, and sampling points within transects were selected in order to take samples from different vegetation types (open and shade). For soil data, several sub-models were compared using Wald tests, classic LRTs and adjusted LRTs where the distribution of the test statistic under the null hypothesis is the Chi-square mixture of Chi-square distributions. The inclusion of random effects via HLMM and suggested by the latest version of LRT allowed us to detect effects of vegetation type on soil properties that were not detected under a classical ANOVA.     

Linking socio-economic factors, environment and land cover in the German Highlands, 1945-1999

Land-cover changes are caused by human activities and natural ecological processes. Thus, our study uses an interdisciplinary approach to research land-cover changes. We present a method to (i) link socio-economic/environmental factors and land-cover changes, (ii) identify indicators of land-cover changes, and (iii) distinguish between socio-economic and environmental indicators associated with local types of overall land-cover changes. The study was conducted in the Lahn-Dill Highlands, Germany, a typical marginal rural landscape. In this region, we investigated land-cover changes occurring over the period 1945-1999. Land-cover data were derived from multi-temporal aerial photographs. Types of overall land-cover changes characterising the districts within the study area were differentiated. With the help of redundancy analysis (RDA), we analysed the relationships between land-cover changes and widely available socio-economic/environmental factors. The results reveal that both individual land-cover changes at patch level and types of overall land-cover changes characterising districts are correlated with socio-economic and environmental factors. Whereas the stable environmental factors are drivers of land-cover changes in our rural study area, socio-economic factors introduced into the analysis mostly result from land-cover changes. We identified correlative socio-economic indicators that cannot explain land-cover changes, but that in combination with the environmental factors can be used to greatly facilitate the reconstruction of past land-cover changes and thus lead to a better knowledge of land-cover history. Based on the types of overall land-cover changes, the results of the study can be adopted for the study of land-cover changes in other regions.     

Sociogenetic structure in a free-living nocturnal primate population: sex-specific differences in the grey mouse lemur (Microcebus murinus)

The grey mouse lemur (Microcebus murinus) has a dispersed social structure, within which female sleeping associations are common. These sleeping associations have been hypothesised to confer anti-predatory and thermoregulatory benefits, especially when rearing offspring. The genetic composition of these associations was determined using microsatellite markers to test predictions derived from kin selection theory. 161 (99 males, 62 females) individual M. murinus belonging to a free-living population in Ampijoroa, north-western Madagascar, were genotyped and observed over a total of 13 months distributed over the dry seasons of 3 successive years (1995-1997). Kin selection theory predicts that these female associations should consist of closely related members, and that female philopatry and male natal dispersal should characterise the dispersal pattern within this species. These predictions were confirmed by the data. Five out of six female sleeping groups consisted of one or more closely related dyads. Females that slept alone did not have close female kin in the vicinity or within the population at all. Closely related female dyads lived in significantly closer proximity than closely related male dyads and closely related male-female dyads showed intermediate proximity. In combination with the result that females possessed significantly more relatives within the population than males, these findings support the behavioural hypotheses of female philopatry and male natal dispersal. Matrilinear grouping patterns and sex-biased dispersal are therefore genetically established in a dispersed primate social organisation for the first time. The results further indicate that several generations of mouse lemurs live together within a given area, implying both an effective mechanism of kin recognition to avoid father-daughter incest and the potential for social learning to ensure individual recognition.     

Stabilization of thioarsenates in iron-rich waters

In recent years, thioarsenates have been shown to be important arsenic species in sulfidic, low-iron waters. Here, we show for the first time that thioarsenates also occur in iron-rich ground waters, and that all methods previously used to preserve arsenic speciation (acidification, flash-freezing, or EDTA addition) fail to preserve thioarsenates in such matrices. Laboratory studies were conducted to identify the best approach for stabilizing thioarsenates by combination and modification of the previously-applied methods. Since acidification was shown to induce conversions between thioarsenates and precipitation of arsenic-sulfide minerals, we first conducted a detailed study of thioarsenate preservation by flash-freezing. In pure water, thioarsenates were stable for 21 d when the samples were flash-frozen and cryo-stored with a minimal and anoxic headspace. Increasing headspace volume and oxygen presence in the headspace were detrimental to thioarsenate stability during cryo-storage. Addition of NaOH (0.1 M) or EtOH (1% V/V) counteracted these effects and stabilized thioarsenates during cryo-storage. Addition of Fe(II) to thioarsenate solutions caused immediate changes in arsenic speciation and a loss of total arsenic from solution during cryo-storage. Both effects were largely eliminated by addition of a neutral EDTA-solution, and thioarsenates were significantly stabilized during cryo-storage by this procedure. Neutralization of EDTA was required to prevent alteration of thioarsenate speciation through pH change. With the modified method (anoxic cryo-preservation by flash-freezing with minimal headspace after addition of neutralized EDTA-solution), the fractions of mono- and dithioarsenate, the two thioarsenates observed in the iron-rich ground waters, remained stable over a cryo-storage period of 11 d. Further modifications are needed for the higher SH-substituted thioarsenates (tri- and tetrathioarsenate), which were not encountered in the studied iron-rich ground waters.     

Acute and chronic toxicity of benzotriazoles to aquatic organisms

Purpose

Resulting from their intensive use as corrosion inhibitors in aircraft deicing and anti-icing fluids (ADAF) and for silver protection in dishwasher detergents benzotriazoles (BTs) are widespread in European surface waters. The current study aimed on an ecotoxicological characterization of 1H-benzotriazole (1H-BT) and 5-methyl-1H-benzotriazole (5MBT).

Methods

Acute and chronic OECD guideline tests were conducted with primary producers (Desmodesmus subspicatus, Lemna minor) and two daphnia species (Daphnia magna, Daphnia galeata) to characterize the hazard of these chemicals. Additionally, the estrogenic activity of both BTs was analyzed in vitro using a recombinant yeast estrogen screen (YES).

Results

Both BTs revealed significant effects in acute and chronic experiments, but exhibited no estrogenic activity in the YES. The algal growth test displayed an inhibited cell number increase with effect concentration (EC) values of EC₁₀ 1.18 and 2.86?mg?l^-1 for 1H-BT and 5MBT, respectively. In the Lemna test, EC₁₀ values were 3.94?mg?l^-1 (1H-BT) and 2.11?mg?l^-1 (5MBT). D. magna was also affected with EC₅₀ (48?h) values of 107?mg?l^-1 for 1H-BT and 51.6?mg?l^-1 for 5MBT. D. galeata was more sensitive with an EC₅₀ (48?h) of 14.7?mg 1H-BT l^-1 and 8.13?mg 5MBT l^-1. In the 21-day reproduction tests with D. magna, the EC₁₀ for 5MBT was 5.93?mg?l^-1 while 1H-BT showed no adverse effects. D. galeata turned out to be more sensitive in the chronic study with EC₁₀ values of 0.97?mg?l^-1 for 1H-BT and 0.40?mg?l^-1 for 5 MBT.

Conclusion

Because BTs are regularly found in the aquatic environment at lower ??g l^-1 concentrations reflecting their persistence and poor elimination during wastewater treatment processes, a preliminary risk assessment was conducted. There is little indication that BTs pose a risk for aquatic ecosystems at current exposure levels during most of the year. However, it cannot be excluded that in winter with a higher usage of ADAFs environmental concentrations may well exceed the level that is considered safe for aquatic organisms.     

Sorption of polycyclic aromatic hydrocarbons (PAHs) to low and high density polyethylene (PE)

Background, aim, and scope

According to their high sorption capacity polyethylene (PE) passive samplers are often used for the analysis of polycyclic aromatic hydrocarbons (PAHs) in the aquatic environment. PE is also one of the primary synthetic polymers found in oceans, and sorption of PAHs to marine PE debris may determine PAH exposure and therefore hazards in marine ecosystems. Thus, an understanding of the sorption process is of great importance. In the present study, the sorption of several PAHs with different polarities to low density polyethylene (LDPE) and high density polyethylene (HDPE) was studied in order to improve our understanding of the influence of material properties on the Fickian diffusion of PAHs into PE.

Materials and methods

Batch sorption experiments were performed with aqueous solutions containing acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, and LPDE or HDPE pellets. Samples were shaken in the dark at 20?±?1°C for 16 time intervals within one week. Concentrations of PAHs were determined in the aqueous samples using solid-phase microextraction coupled with gas chromatography–mass spectrometry. The distribution coefficients (K _PE) between PE and water were estimated from different models reported in the literature. Kinetic sorption of the PAHs into the plastic pellets was described by a diffusion model based on Fick’s second law in spherical coordinates.

Results and discussion

A comparison between different models describing the equilibrium distribution of PAHs between PE and water revealed that the sorption equilibrium seemed to be driven by parameters other than, or in addition to, organic carbon. For both plastic types, diffusion coefficients decreased while the molecular weight of the PAHs increased which indicates a hindered diffusion through the matrix as a result of a larger molecule size. Higher diffusion coefficients were derived for LPDE than for HDPE indicating a greater sorption velocity for LPDE according to the lower polymer density.

Conclusions

Our results revealed that equilibrium time could be shortened during passive sampling as polymer membranes of lower density are used. In some areas, marine ecosystems may not be in equilibrium with respect to concentrations of organic contaminants and abundance of marine plastic debris. In such cases, different polymer densities should be taken into account in risk assessments.