Effect of a global warming-induced increase in typhoon intensity on urban productivity in Taiwan

A number of scientists have recently conducted research that shows that tropical cyclone intensity is likely to increase in the future due to the warming effect of greenhouse gases on surface sea temperatures. The aim of this paper is to establish what would be the likely decrease in the productivity of urban workers due to an increase in tropical cyclone-related downtime. The methodology used simulates future tropical cyclones by magnifying the intensity of historical tropical cyclones between the years 1978 and 2008. It then uses a Monte Carlo simulation to obtain the expected number of hours that a certain area can expect to be affected by winds of a given strength. It shows how annual downtime from tropical cyclones could increase from 1.5% nowadays to up to 2.2% by 2085, an increase of almost 50%. This decrease in productivity could result in a loss of up to 0.7% of the annual Taiwanese GDP by 2085.     

Plant phenology, growth and nutritive quality of Briza maxima: responses induced by enhanced ozone atmospheric levels and nitrogen enrichment

An assessment of the effects of tropospheric ozone (O₃) levels and substrate nitrogen (N) supplementation, singly and in combination, on phenology, growth and nutritive quality of Briza maxima was carried out. Two serial experiments were developed in Open-Top Chambers (OTC) using three O₃ and three N levels. Increased O₃ exposure did not affect the biomass-related parameters, but enhanced senescence, increased fiber foliar content (especially lignin concentration) and reduced plant life span; these effects were related to senescence acceleration induced by the pollutant. Added N increased plant biomass production and improved nutritive quality by decreasing foliar fiber concentration. Interestingly, the effects of N supplementation depended on meteorological conditions and plant physiological activity. N supplementation counteracted the O₃-induced senescence but did not modifiy the effects on nutritive quality. Nutritive quality and phenology should be considered in new definitions of the O₃ limits for the protection of herbaceous vegetation.     

Predicting dioxin-like PCBs soil contamination levels using milk of grazing animal as indicator

Dioxin-like PCBs (dl-PCBs) are ubiquitous persistent organic pollutants of recognized negative effects on human health. Assessing highly polluted areas should be an important public health issue. This study proposes to use the milk of grazing animals as a bioindicator of dl-PCB contamination in the environment. The hypothesis is that milk concentration of dl-PCBs are related to soil concentrations of these compounds, and that soils are generally reflective of a larger environmental issue of dl-PCB contamination. In this study, we evaluate the possibility of predicting soil concentrations using milk of sheep, cows and buffalos in a spatial model. For this purpose, samples of soil and milk collected in Campania (Italy) were introduced in a GIS platform to perform geostatistical analysis for building a simple predictive model. The ordinary least squares regressions (OLS) showed a statistically significant correlation (p < 0.05) between soil and milk contamination. However, this relationship was spatially variable. Thus, a geographically weighted regression (GWR) was performed, obtaining R² values of 0.91, 0.77 and 0.66 for sheep’s, buffalo’s and cow’s milk respectively. Assessed the mathematical relationships between the variables, new data was introduced to evaluate the performance of the model. Predictions of soil contamination with dl-PCBs using sheep’s, cow’s and buffalo’s milk showed a mean error of 23%, 25% and 36% respectively. According to these results the sheep’s milk can be considered the best bioindicator of dl-PCBs contamination among the three species. The results of this project evidence the potentialities of the proposed approach to assess bioindicator performance in a spatial predictive model.     

Assessment of ozone variations and meteorological influences in a tourist and health resort area on the island of Mali Lošinj (Croatia)

The purpose of this study was to investigate ozone, variations, and its correlation with meteorological parameters at a remote location on the Mali Lo?inj Island, which has been a tourist and health resort area in the northern Adriatic. The measured data are discussed in relation to the EU guidelines (Directive 2002/3/EC; Directive 2008/50/EC). In order to characterize ambient air with respect to ozone vegetation injury and photochemical pollution, we calculated accumulated dose over a threshold of 40 parts per billion index and two photochemical pollution indicators. The influence of local meteorological parameters on the measured ozone volume fractions was also investigated. We used the multivariate technique principal component analysis to trace correlations between measured ozone concentration and meteorological parameters.     

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H₂O₂ dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H₂O₂ concentration while further concentration values led to a decrease in TOC abatement efficiency. Then, the effect of different concentrations of Fenton’s reagents was studied for homogeneous Fenton process. Obtained results revealed that 0.25 mM Fe³⁺ and 20 mM H₂O₂ were the best conditions, achieving 80 % TOC removal efficiency at 4 h treatment. Furthermore, heterogeneous PF treatment was developed using iron-activated carbon as catalyst. It was demonstrated that this catalyst is a promising option, reaching 67 % of TOC removal within 4 h treatment without formation of iron leachate in the medium. In addition, two strategies of enhancement for process efficiency are proposed: coupling of PF with electro-Fenton (EF) process in two ways: photoelectro-Fenton (PEF) or PF followed by EF (PF-EF) treatments, achieving in both cases the complete mineralization of DIA solution within only 2 h. Finally, the Microtox tests revealed the formation of more toxic compounds than the initial DIA during PF process, while, it was possible to reach total mineralization by both proposed alternatives (PEF or PF-EF) and thus to remove the toxicity of DIA solution.     

Chlorophyll and suspended sediment mapping to the Caribbean Sea from rivers in the capital city of the Dominican Republic using ALOS AVNIR-2 data

This study aims to study the distribution of contaminants in rivers that flow into the Caribbean Sea using chlorophyll-a (Chl-a) and suspended sediment (SS) as markers and ALOS AVNIR-2 satellite sensor data. The Haina River (HN) and Ozama and Isabela Rivers (OZ-IS) that flow through the city of Santo Domingo, the capital of the Dominican Republic, were chosen. First, in situ spectral reflectance/Chl-a and SS datasets obtained from these rivers were acquired in March 2011 (case A: with no rain influence) and June 2011 (case B: with rain influence), and the estimation algorithm of Chl-a and SS using AVNIR-2 data was developed from the datasets. Moreover, the developed algorithm was applied to AVNIR-2 data in November 2010 for case A and August 2010 for case B. Results revealed that for Chl-a and SS estimations under cases A and B conditions, the reflectance ratio of AVNIR-2 band 4 and band 3 (AV4/AV3) and the reflectance of AVNIR-2 band 4 (AV4) were effective. The Chl-a and SS mapping results obtained using AVNIR-2 data corresponded with the field survey results. Finally, an outline of the distribution of contaminants at the mouth of the river that flows into the Caribbean Sea was obtained for both rivers in cases A and B.     

Failure to confirm previous identification of two putative museum specimens of the Atlantic sturgeon, Acipenser sturio, as the Adriatic sturgeon, A. naccarii

MtDNA analyses were employed to examine the species identification of three preserved museum sturgeon specimens from the River Guadalquivir, two of which were originally described as Acipenser sturio L., 1758 by Hernando (1975; Doñana, Acta Vertd 2: 263–264). Later the same two specimens were identified as A. naccarii Bonaparte, 1836 by Garrido-Ramos et?al. (1997; Mar Biol 129: 33–39) on the basis of morphometric and nuclear DNA analyses. Three different laboratories using independent techniques were unsuccessful in extracting authentic DNA from tissue samples from the three specimens and in obtaining any verifiable PCR product. We cannot confirm the previous molecular identification of two of these specimens by Garrido-Ramos et?al. as A. naccarii. We suggest that these specimens are indeed A. sturio.     

Evaluation of the Spanish hot dip galvanising sector as a source of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans

A survey to estimate the polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) emissions of Spanish hot dip galvanising sector was carried out during 2002. This investigation is the first presenting Spanish experimental data related to this industrial sector. Three different matrices: flue gas, ash and filter dust were tested to quantify the PCDD/Fs generated during the galvanising process. The organic source of PCDD/F formation could be from the insufficient degreasing o from inhibitors or additives used in the pickling steps such as quinoline, isoquinoline, 8-methylquinoline or polyether phosphoric acid. Low levels PCDD/Fs were achieved in air emissions when air control devices are used. On the contrary, filter dusts are highly contaminated; indicating that the absence of air control devices would increase the risk of fugitive emissions. Homologue profiles and Principal Component Analysis demonstrate there are differences in the formation mechanisms in the bath zone (ashes) compared to the stack location (filter dusts and air emissions), related to the de novo synthesis and reaction time. The annual PCDD/F emission to the atmosphere for this sector during 2002 has been estimated in 0.023g I-TEQ. The emission factor of plants with air control devices has been calculated at 0.030microg I-TEQ/ton of galvanised steel.     

Ten years measuring PCDDs/PCDFs in ambient air in Catalonia (Spain)

This work summarizes the results of a ten year surveillance programme on PCDD/F in ambient air carried out in Catalonia (Spain). The study has been conducted by the Dioxin Laboratory of Spanish Council for Scientific Research (CSIC) in collaboration with the Environment Department of the Catalonian Government. 175 samples have been collected throughout Catalonia from 1994 to 2004. Different sampling locations classified as industrial, traffic, urban, suburban and rural sites have been monitored in order to find the most contaminated zones as well as the ones with expected background concentrations. The highest concentrations found in this study were determined at the industrial locations. Concentrations ranging from 5 to 1196 fg I-TEQ/m3, with a mean value of 140 fg I-TEQ/m3 and from 10 to 357 fg I-TEQ/m3, with a mean value of 72 fg I-TEQ/m3 were determined in industrial and traffic sampling points, respectively. In contrast, the lowest concentrations were found in rural stations, ranging from 5 to 45 fg I-TEQ/m3, with a mean value of 28 fg I-TEQ/m3. The PCDD/F concentration trend in Catalonian ambient air shown a clear drop of the median values occurred during the study sampling period. A decline of about 70% was observed from 1997-1998 to 2003-2004.     

Preliminary toxicological assessment of phthalate esters from drinking water consumed in Portugal

This paper reports, for the first time, the concentrations of selected phthalates in drinking water consumed in Portugal. The use of bottled water in Portugal has increased in recent years. The main material for bottles is polyethylene terephthalate (PET). Its plasticizer components can contaminate water by leaching, and several scientific studies have evidenced potential health risks of phthalates to humans of all ages. With water being one of the most essential elements to human health and because it is consumed by ingestion, the evaluation of drinking water quality, with respect to phthalate contents, is important. This study tested seven commercial brands of bottled water consumed in Portugal, six PET and one glass (the most consumed) bottled water. Furthermore, tap water from Lisbon and three small neighbor cities was analyzed. Phthalates (di-n-butyl phthalate ester (DnBP), bis(2-ethylhexyl) phthalate ester (DEHP), and di-i-butyl phthalate ester (DIBP)) in water samples were quantified (PET and glass) by means of direct immersion solid-phase microextraction and ionic liquid gas chromatography associated with flame ionization detection or mass spectrometry due to their high boiling points and water solubility. The method utilized in this study showed a linear range for target phthalates between 0.02 and 6.5 μg L^?1, good precision and low limits of detection that were between 0.01 and 0.06 μg L^?1, and quantitation between 0.04 and 0.19 μg L^?1. Only three phthalates were detected in Portuguese drinking waters: dibutyl (DnBP), diisobutyl (DIBP), and di(ethylhexyl) phthalate (DEHP). Concentrations ranged between 0.06 and 6.5 μg L^?1 for DnBP, between 0.02 and 0.16 μg L^?1 for DEHP, and between 0.1 and 1.89 μg L^?1 for DIBP. The concentration of DEHP was found to be up to five times higher in PET than in glass bottled water. Surprisingly, all the three phthalates were detected in glass bottled water with the amount of DnBP being higher (6.5 μg L^?1) than in PET bottled water. These concentrations do not represent direct risk to human health. Regarding potable tap water, only DIBP and DEHP were detected. Two of the cities showed concentration of all three phthalates in their water below the limits of detection of the method. All the samples showed phthalate concentrations below 6 μg L^?1, the maximum admissible concentration in water established by the US Environmental Protection Agency. The concentrations measured in Portuguese bottled waters do not represent any risk for adult's health.