Electrochemical combustion of herbicide mecoprop in aqueous medium using a flow reactor with a boron-doped diamond anode

The anodic oxidation of 1.8l of solutions with mecoprop (2-(4-chloro-2-methylphenoxy)-propionic acid or MCPP) up to 0.64 g l(-1) in Na2SO4 as background electrolyte within the pH range 2.0-12.0 has been studied using a flow plant containing a one-compartment filter-press electrolytic reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode, both of 20-cm2 area. Electrolyses carried out in batch under steady conditions and operating at constant current density between 50 and 150 mA cm(-2) always yield complete mineralization due to the great concentration of hydroxyl radical generated at the BDD anode. The degradation rate is practically independent of pH and Na2SO4 concentration, but it becomes faster with increasing MCPP concentration, current density, temperature and liquid flow rate. The effect of these parameters on current efficiency and energy cost has also been investigated. Generated weak oxidants such as H2O2 and peroxodisulfate ion have little influence on the mineralization process. The kinetics for the herbicide decay follows a pseudo first-order reaction with a higher rate constant when current density increases. Aromatic products such as 4-chloro-o-cresol, 2-methylhydroquinone and 2-methyl-p-benzoquinone, and generated carboxylic acids such as maleic, fumaric, lactic, pyruvic, tartronic, acetic and oxalic, have been identified as intermediates by chromatographic techniques. The initial chlorine is completely released in the form of chloride ion, which is slowly oxidized to Cl2 at the BDD anode. A reaction pathway for MCPP mineralization involving all products detected is proposed.     

Treatment of wastewater from red and tropical fruit wine production by zeolite anaerobic fluidized bed reactor

A study of the anaerobic treatment of wastewaters derived from red (RWWW) and tropical fruit wine (TFWWW) production was carried out in four laboratory-scale fluidized bed reactors with natural zeolite as bacterial support. These reactors operated at mesophilic temperature (35 degrees C). Reactors R1 and R2 contained Chilean natural zeolite, while reactors R3 and R4 used Cuban natural zeolite as microorganism support. In addition, reactors R1 and R3 processed RWWW, while reactors R2 and R4 used TFWWW as substrate. The biomass concentration attached to zeolites in the four reactors studied was found to be in the range of 44-46 g volatile solids (VS)/L after 90 days of operation time. Both types of zeolites can be used indistinctly in the fluidized bed reactors achieving more than 80%-86% chemical oxygen demand (COD) removals for organic loading rates (OLR) of up to at least 20 g COD/L d. pH values remained within the optimal range for anaerobic microorganisms for OLR values of up to 20 and 22 g COD/L d for RWWW and TFWWW, respectively. Toxicity and inhibition levels were observed at an OLR of 20 g COD/L d in reactors R1 and R3 while processing RWWW, whereas the aforementioned inhibitory phenomena were not observed at an OLR of 24 g COD/L d in R2 and R4, treating TFWWW as a consequence of the lower phenolic compound content present in this substrate. The volatile fatty acid (VFA) levels were always lower in reactors processing TFWWW (R2 and R4) and these values (< 400 mg/L, as acetic acid) were lower than the suggested limits for digester failure. The specific methanogenic activity (SMA) was twice as high in reactors R2 and R4 than in R1 and R3 after 120 days of operation when all reactors operated at an OLR of 20 g COD/L d.     

Sequential electrochemical treatment of dairy wastewater using aluminum and DSA-type anodes

Dairy wastewater is characterized by a high content of hardly biodegradable dissolved, colloidal, and suspended organic matter. This work firstly investigates the performance of two individual electrochemical treatments, namely electrocoagulation (EC) and electro-oxidation (EO), in order to finally assess the mineralization ability of a sequential EC/EO process. EC with an Al anode was employed as a primary pretreatment for the conditioning of 800 mL of wastewater. A complete reduction of turbidity, as well as 90 and 81 % of chemical oxygen demand (COD) and total organic carbon (TOC) removal, respectively, were achieved after 120 min of EC at 9.09 mA cm^?2. For EO, two kinds of dimensionally stable anodes (DSA) electrodes (Ti/IrO₂-Ta₂O₅ and Ti/IrO₂-SnO₂–Sb₂O₅) were prepared by the Pechini method, obtaining homogeneous coatings with uniform composition and high roughness. The ^·OH formed at the DSA surface from H₂O oxidation were not detected by electron spin resonance. However, their indirect determination by means of H₂O₂ measurements revealed that Ti/IrO₂-SnO₂–Sb₂O₅ is able to produce partially physisorbed radicals. Since the characterization of the wastewater revealed the presence of indole derivatives, preliminary bulk electrolyses were done in ultrapure water containing 1 mM indole in sulfate and/or chloride media. The performance of EO with the Ti/IrO₂-Ta₂O₅ anode was evaluated from the TOC removal and the UV/Vis absorbance decay. The mineralization was very poor in 0.05 M Na₂SO₄, whereas it increased considerably at a greater Cl^? content, meaning that the oxidation mediated by electrogenerated species such as Cl₂, HClO, and/or ClO^? competes and even predominates over the ^·OH-mediated oxidation. The EO treatment of EC-pretreated dairy wastewater allowed obtaining a global 98 % TOC removal, decreasing from 1,062 to <30 mg L^?1.     

Robinsonecio gerberifolius as a sentinel organism for atmospheric pollution by heavy metals in several sites of Mexico city and its metropolitan area

Environmental Science and Pollution Research - Evaluate the effect of heavy metals (HM) on sentinel organisms such as vascular plants represent a model to estimate toxic hazard due to environmental...     

Elucidation of adsorption mechanisms and mass transfer controlling resistances during single and binary adsorption of caffeic and chlorogenic acids

Environmental Science and Pollution Research - In this work, the potential of activated carbon to remove caffeic and chlorogenic acids in aqueous solution was investigated. The study focused on...     

Reef coral reproduction in the eastern Pacific: Costa Rica,Panamá, and the Galápagos Islands (Ecuador). VI. Agariciidae, <Emphasis Type="Italic">Pavona clavus</Emphasis>

The reproductive ecology of the zooxanthellate reef coral Pavona clavus was investigated at several sites in Costa Rica, Panamá, and the Galápagos Islands (Ecuador) over the period 1985–2009. Pavona clavus displayed stable gonochorism as only five hermaphrodites were found in 590 samples. At four of five locations, sex ratios were skewed toward female dominance; however, at Saboga Island (Panamá) male colonies predominated. In Panamá, sexual maturity was observed in an estimated eight-year-old female colony, and several colonies of 10–20 years of age demonstrated gametogenesis. Sexual activity was observed at all study sites, but gamete development occurred in only 14–31% of colonies sampled sporadically. Seasonality of gametogenic activity occurred predominantly during the warm/wet season, June to August, at mainland sites (Caño Island, Costa Rica, and Gulfs of Chiriquí and Panamá, Panamá). This pattern was repeated in the Galápagos Islands, but mainly from March to May when seasonally high sea temperatures and rainfall prevailed there. Histological sampling and field observations indicated that spawning was centered around the full moon, most frequently on lunar day 17, and near sunset (1,800 h). Mean fecundity (mature ova cm^?2 live tissue) estimates were significantly different for two sites and ranged from ~1,780 (Saboga Island, Gulf of Panamá, seasonally upwelling) to ~4,280 (Uva Is, Gulf of Chiriquí, non-upwelling). Assuming three annual spawning events colony^?1 (August, September, October), extrapolation of minimum and maximum fecundities yield 5,340 and 12,840 ova cm^?2 year^?1. Seasonal, lunar, and diel spawning patterns in nine zooxanthellate species at Uva Island indicate asynchronous coral community spawning.     

Reef coral reproduction in the equatorial eastern Pacific: Costa Rica, Panamá, and the Galápagos Islands (Ecuador). VII. Siderastreidae, Psammocora stellata and Psammocora profundacella

Two zooxanthellate, scleractinian species present in the equatorial eastern Pacific, Psammocora stellata and Psammocora profundacella, were examined in terms of their reproductive biology and ecology at four study sites, non-upwelling (Ca?o Island, Costa Rica, and Uva Island, Panamá), upwelling (Gulf of Panamá, Panamá), and seasonally varying thermal environments (Galápagos Islands). Both species were gonochoric broadcast spawners lacking zooxanthellae in mature ova. Mature gametes and spawned gonads are present around full moon; however, no spawning was observed naturally or in outdoor aquaria. Mature gametes occurred in P. stellata at Ca?o Island for nearly 6?months, and year round at Uva Island, both non-upwelling sites. Reproductively active colonies occurred mostly in the warmer months in the Gulf of Panamá and Galápagos Islands. In the Galápagos Islands, where collecting effort was greatest for P. profundacella, mature gametes were also most prevalent during the warm season. Annual fecundity was high in both species, 1.3–1.8?×?10⁴?ova?cm^?2?year^?1 in P. stellata and 1.2–2.0?×?10⁴?ova?cm^?2?year^?1 in P. profundacella. Compared to other eastern Pacific corals, P. stellata was relatively resistant to ENSO-related bleaching and mortality, especially populations inhabiting deep (12–20?m) coral communities. Rapid recovery and persistence of Psammocora spp. can be attributed to several factors: (a) relative resistance to bleaching, (b) deep refuge populations, (c) broadcast spawning, (d) protracted seasonal reproduction, (e) high fecundity, and (f) asexual propagation.     

A new <Emphasis Type="Italic">P. putida</Emphasis> instrumental toxicity bioassay

Here, we present a new toxicity bioassay (CO₂-TOX), able to detect toxic or inhibitory compounds in water samples, based on the quantification of Pseudomonas putida KT2440 CO₂ production. The metabolically produced CO₂ was measured continuously and directly in the liquid assay media, with a potentiometric gas electrode. The optimization studies were performed using as a model toxicant 3,5-DCP (3,5-dichlorophenol); later, heavy metals (Pb²⁺, Cu²⁺, or Zn²⁺) and a metalloid (As⁵⁺) were assayed. The response to toxics was evident after 15 min of incubation and at relatively low concentrations (e.g., 1.1 mg/L of 3,5-DCP), showing that the CO₂-TOX bioassay is fast and sensitive. The EC₅₀ values obtained were 4.93, 0.12, 6.05, 32.17, and 37.81 mg/L for 3,5-DCP, Cu²⁺, Zn²⁺, As⁵⁺, and Pb²⁺, respectively, at neutral pH. Additionally, the effect of the pH of the sample and the use of lyophilized bacteria were also analyzed showing that the bioassay can be implemented in different conditions. Moreover, highly turbid samples and samples with very low oxygen levels were measured successfully with the new instrumental bioassay described here. Finally, simulated samples containing 3,5-DCP or a heavy metal mixture were tested using the proposed bioassay and a standard ISO bioassay, showing that our test is more sensible to the phenol but less sensible to the metal mixtures. Therefore, we propose CO₂-TOX as a rapid, sensitive, low-cost, and robust instrumental bioassay that could perform as an industrial wastewater-process monitor among other applications.     

Detection of fungal development in closed spaces through the determination of specific chemical targets

In addition to the biodegradation problems encountered in buildings, exposure of their occupants to moulds is responsible for numerous diseases: infections (invasive nosocomial aspergillosis), immediate or delayed allergies, food-borne infections and different types of irritation. In this context, the aim of our work has been to determine specific chemical tracers for fungal development on construction materials. More generally, by detecting a specific chemical fingerprint of fungal development, our objective was to propose a microbiological alert system which could control systems and/or procedures for the microbiological treatment of indoor areas.

We therefore characterized the chemical emissions from six types of construction material contaminated artificially by moulds. Chemical fingerprints were established for 19 compounds arising specifically from fungal metabolism: 2-ethylhexanoic acid methyl ester, 1-octen-3-ol, 3-heptanol, 3-methyl-1-butanol, 2-methyl-1-butanol, 1,3-octadiene, 2-(5H)-furanone, 2-heptene, -pinene, 2-methylisoborneol, 4-heptanone, 2-methylfuran, 3-methylfuran, dimethyldisulfide, methoxybenzene, a terpenoid and three sesquiterpenes.

Determining the origin of these compounds and their specific links with a growth substrate or fungal species made it possible to judge the pertinence of choosing these compounds as tracers.

Thus the detecting specific volatile organic compounds emitted as from the second day of fungal growth demonstrated that this approach had the advantage of detecting fungal development both reliably and rapidly before any visible signs of contamination could be detected.