Environmental sustainability and the integration of different methods for its assessment

The aim of this paper is to propose a research framework, based on the joint use of three widely used methods: EMergy Evaluation (EME), Ecological Footprint Analysis (EFA) and Greenhouse Gas Inventory (GHGI), that are applied to assess the environmental sustainability of a region. The results of application of these methods to several Italian Provinces enabled us to compare their sustainability, and to test the methods with respect to sustainability requirements at local and global level. The outcomes suggest that the proposed framework provides an organic evaluation of regional systems based on key aspects, such as resources depletion, consumption patterns, waste production and absorption.     

Integrating methods for the environmental sustainability: the SPIn-Eco Project in the Province of Siena (Italy)

This paper shows how different methods can be integrated in order to provide an organic evaluation of the environmental sustainability at the territorial level. A territory is a complex, dynamic and open system where a population develops, uses resources, produces goods and services, consumes, depletes and finally obtains economic results. All these elements characterise human behaviour, which can be monitored, measured and compared to the capacity of the environment to sustain it in the long run. The SPIn-Eco Project for the Province of Siena (Italy) is described as an example of an environmental sustainability assessment of an area, and its methods (Ecological Footprint, Greenhouse Gas Inventory, Extended Exergy Analysis, Emergy Evaluation, Life Cycle Assessment (LCA) and Remote Sensing) are briefly introduced. This Project has been proposed and funded by the most important provincial administrative and financial institutions in the territory (the Administration of the Province of Siena and the Monte dei Paschi Foundation, respectively), and was designed and realised in 4 years (2001-2004) by a research team coordinated by the University of Siena.     

Modification of soil humic matter after 4 years of compost application

Two soil plots, 1 ha each, were amended yearly for 4 years, respectively, with 35.8 and 71.6 Mg ha(-1) yr(-1) of mature compost (CM) obtained from food and vegetable residues. The compost, amended soils, and a control soil plot after 4 years (S4), were analyzed for humin (HUC), humic acid (HAC), fulvic acid (FAC), and non-humic carbon (NHC) content. Compared to S4, the amended soil contained more humified C (HAC, FAC and HUC) and less NHC. Further evidence of the effect of compost on soil organic matter was obtained by the analysis of the humic acid (HA) fractions isolated from both the compost and the soils. These were characterized by elemental analyses and Diffuse Reflectance Infrared Fourier Transformed spectroscopy. The HAs isolated from CM and from S4 were significantly different. The HAs isolated from the amended plots were more similar to HA isolated from CM than to HA isolated from S4. The experimental data of this work indicate that the compost application may affect significantly the soil organic matter composition, and that the approach used in this work allows one to trace the fate of compost organic matter in soil.     

Chironomid mouthpart deformities as indicator of environmental quality: a case study in Lake Trasimeno (Italy)

The aim of the present study was to monitor mouthpart deformities of Chironomus plumosus (Insecta-Diptera) in Lake Trasimeno (2000-2010) in relation with sediment contamination by heavy metals, which is one of the main causes of deformity induction. In Lake Trasimeno, concentrations of heavy metals in the investigated littoral zone were low, in comparison with those of the central area. By contrast, the incidence of deformities was much higher in the littoral station (2006-2009) than in the central area. In the littoral zone, the deformities progressively decreased and by 2010 reached values similar to those observed in the central area (2000-2002, 2010). This decrease was mainly due to the reduction of severe deformities, thus indicating an environmental quality recovery of this littoral sector. Chemical analysis revealed that the higher incidence of deformities in the littoral zone was not caused by heavy metal contamination, unless they may have contributed to a joint action with other toxicants. The present study on Lake Trasimeno provided additional evidence that chironomid mouthpart deformities can be used in biomonitoring programs to evaluate sediment contamination by toxicants. Since mouthpart deformities may also be induced by compounds not included in routine chemical analyses, they may better reflect sediment quality than chemical analysis alone.     

Processing Stability and Biodegradation of Polylactic Acid (PLA) Composites Reinforced with Cotton Linters or Maple Hardwood Fibres

Polylactic acid (PLA) composites comprising up to 25 wt% cotton linter (CL) or up to 50 % maple wood fibre (WF) were prepared by compounding and injection moulding. A reduction of crystallinity in the PLA matrix was observed as a result of the thermal processing method. These PLACL and PLAWF composites provided excellent improvements in both stiffness (with increases in tensile and flexural modulus) and toughness (increases in notched impact strength) properties over the neat PLA resin, while the tensile and flexural strengths of the composites were generally unchanged, while the strain at break values were reduced in comparison to the neat PLA. DMA results indicated incorporating these fibres caused the mechanical loss factor (tan δ) to decrease, suggesting better damping capabilities were achieved with the composites. SEM analysis of the impact fractured surfaces of the PLACL composites showed debonding-cavitation at the matrix-fibre interface while the PLAWF composites showed good wetting along its matrix-fibre interface. The composting of these composites up to 90 days showed that the degradation onset time was increased when increasing the fibre loadings, but the maximum degree of degradation and the maximum daily rates of degradation were decreased compared to neat PLA. On a weight basis of fibre loading, the PLACL composites had a quicker onset of biodegradation, a higher maximum daily rate of biodegradation and, overall, a higher degree of biodegradation at 90 days than the PLAWF composites, possibly due to the quicker thermal hydrolysis observed in the PLA matrix of the PLACL composites during processing and composting.     

Alkylphenols and alkylphenol ethoxylates contamination of crustaceans and fishes from the Adriatic Sea (Italy)

This paper presents the results of an investigation on the occurrence of alkylphenols (APs) and their ethoxylates (APEs) in 8 edible marine species from the Adriatic Sea and tries to estimate the corresponding intake for the Italian population. Two crustaceans, Nephrops norvegicus (Norway lobster) and Squilla mantis (spottail mantis shrimp), plus six fish species, Engraulis enchrascicolus (anchovy), Scomber scombrus (Atlantic mackerel), Merluccius merluccius (European hake), Mullus barbatus (red mullet), Solea vulgaris (common sole) and Lophius piscatorius (angler) were analyzed for their content of nonylphenol (NP), octylphenol (OP) and octylphenol polyethoxylates (OPEs). These compounds were found in all analysed samples. NP was detected at the highest concentrations: 118-399 and 9.5-1431 ng g(-1) fresh weight (fw) respectively in crustaceans and fish. OP was found at respective levels of 2.7-4.7 and 0.3-3.8 ng g(-1) fw in crustaceans and fish, whereas OPE was determined at respective concentrations of 1.2-16.8 and 0.2-21.1 ng g(-1) fw in the same species. These results, together with those from a previous study on 4 edible mollusc, allow to estimate respective daily intakes for NP, OP, and OPE of about 12, 0.1, and 0.1 microg day(-1) for an Italian adult living along the Adriatic Coast. In relation to NP and OP, these intakes are much lower than the doses associated with toxic effects in laboratory animals (9 mg kg(-1) bw for rats). Nevertheless, data of exposure from other sources to these chemicals and others with similar biological characteristics are needed.     

The role of electromagnetic potentials in the evolutionary dynamics of ecosystems

It is discussed that the electromagnetic potential can cause the emergence of the coherent structures that in view of their coherence, openness and non-linearity, are able to self-organize and form various hierarchical levels of ecosystems. In the meantime the electromagnetic potential is also the physical agent acting as a messenger in these coherent structures. So it plays the task of reducing the number of independent microstates of a coherent system, becoming a candidate for implementing the concept of negentropy. Electromagnetic potential is shown to be essential for the self-organization and the time evolution of ecosystems, providing the mechanism for their non-locality, complexity and self-consistency (self-maintaining).     

Emergy and emergy algebra explained by means of ingenuous set theory

Emergy is an important concept that has originated several effects in ecology, systems ecology and sustainability science. Its communication, however, has always presented several problems, since it does not follow the same rules of conservation as other energy-based approaches. Attempts have been made to clarify emergy by means of more formal/mathematical approaches, but the problem persists. In this paper, we have introduced a view of emergy and of its algebra based on ingenuous set theory. By means of this simple tool, emergy can be defined as the set of solar exergy that is directly and indirectly necessary to make a product. The operation that correctly sums the emergy “carried” by the inputs to a process is the union. This definition and the operation of union are able to account for all the rules of emergy algebra.     

In situ fixation of metals in soils using bauxite residue: chemical assessment

Contamination of soils with heavy metals and metalloids is a widespread problem all over the world. Low cost, non-invasive, in situ technologies are required for remediation processes. We investigated the efficiency of a bauxite residue (red mud) to fix heavy metals in two soils, one contaminated by industrial activities (French soil), and one by sewage sludge applications (UK soil). This Fe-oxide rich material was compared with lime, or beringite, a modified aluminosilicate that has been used for in situ fixation processes. Four different crop species were successively grown in pots. Metal concentrations in the soil pore waters were analyzed during the growing cycles. At the end of the experiment fluxes of heavy metals were measured using a diffusive gradient in thin film technique (DGT). Furthermore, a sequential extraction procedure (SEP) and an acidification test were performed to investigate the mechanisms of metal fixation by different soil amendments. In both soils, the concentrations of metals in the soil pore water and metal fluxes were greatly decreased by the amendments. An application of 2% red mud performed as well as beringite applied at 5%. Increasing soil pH was a common mechanism of action for all the amendments. However, the red mud amendment shifted metals from the exchangeable to the Fe-oxide fraction, and decreased acid extractability of metals. The results suggest that specific chemisorption, and possibly metal diffusion into oxide particles could also be the mechanisms responsible for the fixation of metals by red mud.