International standardized procedures for in vivo evaluation of multi-walled carbon nanotube toxicity in water

The classical approach in ecotoxicological evaluation of chemical substances consists of conducting standardized bioassays on organism models. In this work, the potential impact of industrial multi-walled carbon nanotubes was investigated by ecotoxicological standardized procedures using aquatic organisms of different trophic levels, namely bacteria, green algae, invertebrates, fish, and amphibians. The results indicated (1) inhibition of growth in amphibians at 50 mg L^?1 and higher, and (2) no effects on daphnia and fish up to 100 mg L^?1. With the exception of algae (for which Fe deficiency is measured), it seems that the observed toxicity may be due to physiological effects in relation to the ingestion of carbon nanotubes not necessarily related to their intrinsic effects.     

Effect of humic acid and metal ions on the debromination of BDE209 by nZVM prepared from steel pickling waste liquor

As a promising in situ remediation technology, nanoscale zero-valent iron (nZVI) can remove polybrominated diphenyl ethers such as decabromodiphenyl ether (BDE209) effectively, However its use is limited by its high production cost. Using steel pickling waste liquor as a raw material to prepare nanoscale zero-valent metal (nZVM) can overcome this deficiency. It has been shown that humic acid and metal ions have the greatest influence on remediation. The results showed that nZVM and nZVI both can effectively remove BDE209 with little difference in their removal efficiencies, and humic acid inhibited the removal efficiency, whereas metal ions promoted it. The promoting effects followed the order Ni²⁺>Cu²⁺>Co²⁺ and the cumulative effect of the two factors was a combination of the promoting and inhibitory individual effects. The major difference between nZVM and nZVI lies in their crystal form, as nZVI was found to be amorphous while that of nZVM was crystal. However, it was found that both nZVM and nZVI removed BDE209 with similar removal efficiencies. The effects and cumulative effects of humic acid and metal ions on nZVM and nZVI were very similar in terms of the efficiency of the BDE209 removal.     

Detecting and quantifying reductive dechlorination under monitored natural attenuation conditions

Field sampling and testing were used to investigate the relationship between baseline geochemical and microbial community data and in situ reductive dechlorination rates at a site contaminated with trichloroethene (TCE) and carbon tetrachloride (CTET). Ten monitoring wells were selected to represent conditions along groundwater flow paths from the contaminant source zone to a wetlands groundwater discharge zone. Groundwater samples were analyzed for a suite of geochemical and microbial parameters; then push‐pull tests with fluorinated reactive tracers were conducted in each well to measure in situ reductive dechlorination rates. No exogenous electron donors were added in these tests, as the goal was to assess in situ reductive dechlorination rates under natural attenuation conditions. Geochemical data provided preliminary evidence that reductive dechlorination of TCE and CTET was occurring at the site, and microbial data confirmed the presence of known dechlorinating organisms in groundwater. Push‐pull tests were conducted using trichlorofluoroethene (TCFE) as a reactive tracer for TCE and, in one well, trichlorofluoromethane (TCFM) as a reactive tracer for CTET. Injected TCFE was transformed to cis‐ and trans‐dichlorofluoroethene and chlorofluoroethene, and, in one test, injected TCFE was completely dechlorinated to fluoroethene (FE). In situ TCFE transformation rates ranged from less than 0.005 to 0.004/day. In the single well tested, injected TCFM was transformed in situ to dichlorofluoromethane and chlorofluoromethane; the TCFM transformation rate was estimated as 0.001/day. The results indicate that it is possible to use push‐pull tests with reactive tracers to directly detect and quantify reductive dechlorination of chlorinated ethenes and ethanes under monitored natural attenuation conditions, which has not previously been demonstrated. Transformation rate estimates obtained with these techniques should improve the accuracy of contaminant transport modeling. © 2012 Wiley Periodicals, Inc.     

Diurnal migration and vertical distribution of phyllosoma larvae of the western rock lobster Panulirus cygnus

Studies off the west coast of Australia showed that the phyllosoma larvae of Panulirus cygnus George undergo a diurnal vertical migration, with light as an important factor influencing the depth distribution of all 9 phyllosoma stages. The early stages (I to III) occurred at the surface at night regardless of moonlight intensity, whereas late stages (VI to IX) concentrated at the surface only on nights with less than 5% of full moonlight. Midday peak densities of early-stage larvae occurred in the 30 to 60 m depth range while those of mid (IV to VI) and late stages were in the 50 to 120 m range. Depths of peak densities of larvae increased with distance offshore. The limits of vertical distribution of the phyllosoma remained within ranges of illuminance which were estimated to be in the order of 50 to 250 E m^-2 sec^-1 for early stages, 20 to 200 E m^-2 sec^-1 for mid stages and 5 to 50 E m^-2 sec^-1 for late stages. Minimal rates of net vertical movement were estimated for the larvae. Early stages exhibited mean net rates of ascent and descent of 13.7 and 13.0 m h^-1, respectively, while the rates for mid stages were 16.0 and 16.6 m h^-1 and for late stages 19.4 and 20.1 m h^-1. Diurnal migrations and vertical distribution are shown to have a vital role in the relationships between circulation in the south-eastern Indian Ocean and the transport and dispersal of the phyllosoma larvae. The diurnal migrations of early stages place them at the surface at night, when offshore vectors of wind-driven ocean-surface transport dominate, and below the depth of wind-induced transport during the day, when offshore vectors are small or negative, thus accounting for their offshore displacement. Mid and late stages, because of their deeper daytime distribution and absence from the surface on moonlight nights, are predominantly subject to circulation features underlying the immediate surface layer. This is hypothesized to account for the return of the phyllosoma to areas near the continental shelf edge by subjecting them to a coastward mass transport of water which underlies the immediate surface layer.The western rock lobster is referred to as P. longipes or P. longipes cygnus in some of the literature quoted; these are synonymous with P. cygnus.     

Forestry administration and policies in the Philippines

This article begins by summarizing the importance of the forestry sector in the Philippine economy It provides an overview of the multiplicity of Philippine governmental institutions involved in forestry in 1982 Then it discusses forestry laws in the country and concludes by examining fifteen critical forest policy issues: sustained yield management; area-specific logging bans; increased use of wood wastes; revision of forest charges; unprocessed log export ban; rationalization of the forest industry, acceleration of reforestation; protection of watersheds; recognition of the social dimensions of slash- and-burn agriculture; fuelwood supply; public land classification for forestry and agriculture, development of plantations for dendrothermal electricity; multiple-use management; preservation of mangrove areas, and improvements in administration and implementation.Research for this paper was supported by the East-West Center Environment and Policy Institute. The author would like to acknowledge the assistance of the Natural Resources Management Center of the Philippine Ministry of Natural Resources.     

The costs and benefits of radon remediation programmes in existing homes: case study of action level selection

Radon gas can be present within buildings at sufficiently high levels that it becomes a health risk. Such levels can be reduced, and so radon remediation programmes in the home in UK Affected Areas should result in reduced risks to the population. This paper considers the benefits and costs of the domestic radon remediation programme in Northamptonshire, UK, and considers the implications of the choice of Action Level, in view of the adoption of different levels in many countries. A programme with a higher Action Level will cost less, and target those most at risk, but will be less cost effective. In addition, a higher Action Level leaves a higher residual dose and risk to the remaining population. Such doses are higher than and inconsistent with the radiation dose limits for the general public in the EU Basic Standards Directive.     

A critical comparison of the cost-effectiveness of domestic radon remediation programmes in three counties of England

Radon remediation programmes in domestic dwellings were carried out in five areas, from three counties of England, and the total costs obtained. A single company, which abided by the Code of Practice of the Radon Council of Great Britain, carried out the remediation. The dose savings from the programmes were calculated and used to estimate the number of lung cancers averted. The data obtained allowed the cost-effectiveness of the remediation programmes in each area to be calculated. The remediation programmes in three areas (Northants 2, 3 and North Oxfordshire) were cost-effective whereas those in two areas (Northants 1 and North Somerset) were not. To be cost-effective, the Northants I and North Somerset areas would need to increase the number of householders that carried out remediation, if they were over the UK Action Level. Health policy makers should concentrate their resources on communities in areas where there is a significant proportion of dwellings above the UK Action Level and where the number of properties being remediated is low.     

Results of a program to control phosphorus discharges from dairy operations in south-central Florida,USA

During 1987–1992, a mandatory program to control phosphorus discharges was implemented at dairy operations located to the north of Lake Okeechobee, Florida, USA. Thirty of 48 dairies participated in this program and implemented best management practices (BMPs), which included the construction of intensive animal waste management systems. Eighteen dairies closed their milkproducing operations under a government-funded buyout program. In this paper, we compare trends in runoff total phosphorus (TP) concentrations among the dairies that remained active and implemented BMPs. A central feature of the dairy waste management system is the high intensity area (HIA), defined as the milking barn and adjacent vegetation-free land, encircled by a drainage ditch and dike. Animal waste from the HIA is diverted into anaerobic lagoons and storage ponds, from which water is periodically removed and used for irrigation of field crops. The impacts of BMP construction on runoff TP concentrations were immediate and, in most cases, dramatic. Average TP concentrations declined significantly (P < 0.001), from 9.0 to 1.2 mg TP liter^–1 at dairies in one basin (Lower Kissimmee River), and from 2.6 to 1.0 mg TP liter^–1 in another (Taylor Creek/Nubbin Slough). Some sites experienced greater declines in TP than others. To elucidate possible causes for the difference in response, a multivariate statistical model was utilized. Independent variables included soil pH, soil drainage characteristics, spodic horizon depth, and the areas of different BMP components (pasture, HIA, spray fields). The analysis significantly separated dairies with the highest and lowest runoff TP concentrations. Lowest TP occurred at dairies having particular soil characteristic (shallow spodic horizon) and certain BMP features (large HIA and small heard pastures).