Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Tracking the prevalence of rollover protective structures on U.S. farm tractors: 1993, 2001, and 2004

Problem

Between 1992 and 2005, 1412 workers on farms died from tractor overturns. A Rollover Protective Structure (ROPS) is a proven intervention to reduce overturn deaths. However, farm characteristics that are associated with the adoption of ROPS are not well understood.

Methods

ROPS prevalence statistics were derived from National Institute for Occupational Safety and Health (NIOSH) surveys that tracked ROPS use on farms. Data were from the years 1993, 2001, and 2004.

Results

In 1993, 38% of tractors were equipped with ROPS. This increased to 51% by 2004. ROPS prevalence rates were higher on farms in the Southern region of the United States, on farms where the operator was 25-34 years old, and on farms with $100,000 or more of farm sales. Low ROPS prevalence rates were associated with farm operators 65 years old or older and with farms with less than $10,000 of farm product sales.

Summary

The increase in ROPS prevalence between 1993 and 2004 has not been sufficient to decrease the rate of tractor overturn deaths on farms. Incentive programs targeting older farm operators and low-income farm operations are suggested to increase ROPS use on tractors.

Impact on Industry

The study provides farm characteristics associated with low ROPS prevalence rates. The results can be used to target farms for future ROPS promotion activities.     

Environmental evaluation for workplace violence in healthcare and social services

PROBLEM: Federal policy recommends environmental strategies as part of a comprehensive workplace violence program in healthcare and social services. The purpose of this project was to contribute specific, evidence-based guidance to the healthcare and social services employer communities regarding the use of environmental design to prevent violence. METHOD: A retrospective record review was conducted of environmental evaluations that were performed by an architect in two Participatory Action Research (PAR) projects for workplace violence prevention in 2000 and, in the second project in 2005. Ten facility environmental evaluation reports along with staff focus group reports from these facilities were analyzed to categorize environmental risk factors for Type II workplace violence. RESULTS: Findings were grouped according to their impact on access control, the ability to observe patients (natural surveillance), patient and worker safety (territoriality), and activity support. DISCUSSION: The environmental assessment findings reveal design and security issues that, if corrected, would improve safety and security of staff, patients, and visitors and reduce fear and unpredictability. IMPACT ON INDUSTRY: Healthcare and social assistance employers can improve the effectiveness of violence prevention efforts by including an environmental assessment with complementary hazard controls.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Determination of heavy metals and metals levels in five fish species from I??kl? Dam Lake and Karaca?ren Dam Lake (Turkey)

The concentrations of heavy metals and metals (Zn, Pb, Bi, Cd, Ni, Co, Fe, Mn, Mg, Cu, Cr, Ca, Sr, Na, Li, K) were measured in muscle of five species Cyprinus carpio (from I??kl? dam), Scardinius erythrophthalmus (from I??kl? dam), Tinca tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), Carassius carassius (from Karaca?ren dam) caught from I??kl? and Karaca?ren. The highest metal was Na (466.95 μg/g) in C. carassius, while the lowest levels were Fe (0.37 μg/g) and Cu (0.37 μg/g) in C. carpio from I??kl? dam. The mean concentrations μg/g d.w. some of heavy metals in muscle of C. carpio (from I??kl? dam), S. erythrophthalmus (from I??kl? dam), T. tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), C. carassius (from Karaca?ren dam) were as follows: Cd 2.00-2.10-1.95-2.06-2.27, Zn 4.36-2.64-13.13-13.33-24.47, Pb 1.65-1.24-1.90-2.37-2.41, Co 2.46-2.37-2.48-2.58-2.80, Mg 138.51-154.35-218.59-204.58-202.16, Fe 0.37-2.62-3.17-3.01-12.33, respectively.     

The BIOTA Biodiversity Observatories in Africa—a standardized framework for large-scale environmental monitoring

The international, interdisciplinary biodiversity research project BIOTA AFRICA initiated a standardized biodiversity monitoring network along climatic gradients across the African continent. Due to an identified lack of adequate monitoring designs, BIOTA AFRICA developed and implemented the standardized BIOTA Biodiversity Observatories, that meet the following criteria (a) enable long-term monitoring of biodiversity, potential driving factors, and relevant indicators with adequate spatial and temporal resolution, (b) facilitate comparability of data generated within different ecosystems, (c) allow integration of many disciplines, (d) allow spatial up-scaling, and (e) be applicable within a network approach. A BIOTA Observatory encompasses an area of 1?km² and is subdivided into 100 1-ha plots. For meeting the needs of sampling of different organism groups, the hectare plot is again subdivided into standardized subplots, whose sizes follow a geometric series. To allow for different sampling intensities but at the same time to characterize the whole square kilometer, the number of hectare plots to be sampled depends on the requirements of the respective discipline. A hierarchical ranking of the hectare plots ensures that all disciplines monitor as many hectare plots jointly as possible. The BIOTA Observatory design assures repeated, multidisciplinary standardized inventories of biodiversity and its environmental drivers, including options for spatial up- and downscaling and different sampling intensities. BIOTA Observatories have been installed along climatic and landscape gradients in Morocco, West Africa, and southern Africa. In regions with varying land use, several BIOTA Observatories are situated close to each other to analyze management effects.     

Assessment of Spatiotemporal Varying Relationships Between Rainfall,Land Cover and Surface Water Area Using Geographically Weighted Regression

Traditional regression techniques such as ordinary least squares (OLS) are often unable to accurately model spatially varying data and may ignore or hide local variations in model coefficients. A relatively new technique, geographically weighted regression (GWR) has been shown to greatly improve model performance compared to OLS in terms of higher R ² and lower corrected Akaike information criterion (AIC_C). GWR models have the potential to improve reliabilities of the identified relationships by reducing spatial autocorrelations and by accounting for local variations and spatial non-stationarity between dependent and independent variables. In this study, GWR was used to examine the relationship between land cover, rainfall and surface water habitat in 149 sub-catchments in a predominately agricultural region covering 2.6 million ha in southeast Australia. The application of the GWR models revealed that the relationships between land cover, rainfall and surface water habitat display significant spatial non-stationarity. GWR showed improvements over analogous OLS models in terms of higher R ² and lower AIC_C. The increased explanatory power of GWR was confirmed by the results of an approximate likelihood ratio test, which showed statistically significant improvements over analogous OLS models. The models suggest that the amount of surface water area in the landscape is related to anthropogenic drainage practices enhancing runoff to facilitate intensive agriculture and increased plantation forestry. However, with some key variables not present in our analysis, the strength of this relationship could not be qualified. GWR techniques have the potential to serve as a useful tool for environmental research and management across a broad range of scales for the investigation of spatially varying relationships.     

Ecosystem Viable Yields

The World Summit on Sustainable Development (Johannesburg, 2002) encouraged the application of the ecosystem approach by 2010. However, at the same summit, the signatory States undertook to restore and exploit their stocks at maximum sustainable yield (MSY), a concept and practice without ecosystemic dimension, since MSY is computed species by species, on the basis of a monospecific model. Acknowledging this gap, we propose a definition of “ecosystem viable yields” (EVY) as yields compatible (a) with biological safety levels (over which biomasses can be maintained for all times) and (b) with an ecosystem dynamics. The difference from MSY is that this notion is not based on equilibrium but on viability theory, which offers advantages for robustness. For a generic class of multispecies models with harvesting, we provide explicit expressions for the EVY. We apply our approach to the anchovy–hake couple in the Peruvian upwelling ecosystem.