Macroalgae mitigation potential for fish aquaculture effluents: an approach coupling nitrogen uptake and metabolic pathways using Ulva rigida and Enteromorpha clathrata

Aquaculture effluents are rich in nitrogen compounds that may enhance local primary productivity, leading to the development of algae blooms. The goal of this study was to assess the potential use of naturally occurring green macroalgae (Ulva and Enteromorpha) as bioremediators for nitrogen-rich effluents from a fish aquaculture plant, by evaluating their respective uptake dynamics under controlled conditions. Ulva and Enteromorpha were incubated separately in aquaculture effluent from a local pilot station. Algae tissue and water samples were collected periodically along 4 h. For each sample, nitrate, nitrite, and ammonia concentrations were quantified in the effluent, while internal algae reserve pools and nitrate reductase activity (NRA) were determined within the algae tissues. Both macroalgae absorbed all dissolved inorganic nitrogen compounds in less than 1 h, favoring ammonia over nitrate. Ulva stored nitrate temporarily as an internal reserve and only used it after ammonia availability decreased, whereas Enteromorpha stored and metabolized ammonia and nitrate simultaneously. These distinct dynamics of ammonia and nitrate uptake supported an increase in NRA during the experiment. This study supports the hypothesis that Ulva or Enteromorpha can be used as bioremediators in aquaculture effluents to mitigate excess of dissolved inorganic nitrogen.     

Application of an ELISA to the quantification of carbamazepine in ground, surface and wastewaters and validation with LC-MS/MS

Carbamazepine is a psychiatric pharmaceutical widely detected in aquatic environments. Due to its generalized occurrence and environmental persistence it might be considered as an anthropogenic pollution indicator. In this research, a previously developed enzyme-linked immunosorbent assay (ELISA), based on a commercial monoclonal antibody, was applied to the quantification of carbamazepine in ground, surface and wastewaters and results were validated by liquid chromatography-tandem mass spectrometry (LC-MS/MS).The performance of the applied ELISA methodology was tested in the presence of high concentrations of sodium chloride and dissolved organic matter. The method was not significantly affected by matrix effects, being adequate for the quantification of carbamazepine in environmental samples, even without sample pre-treatment. This method allows the quantification of carbamazepine in the range of 0.03-10 μg L⁻¹, with a relative error lower than 30%. Due to a pH dependent cross-reactivity with cetirizine, an antihistaminic drug, the assay also enabled the quantification of cetirizine in the samples.The application of the developed method to the quantification of carbamazepine was performed by using environmental samples with very different matrices, collected in the geographical area of Ria de Aveiro, an estuarine system located in the North of Portugal. Carbamazepine was detected in all analyzed wastewater samples and in one surface water with concentrations between 0.1 and 0.7 μg L⁻¹. Validation with LC-MS/MS revealed that results obtained by ELISA are 2-28% overestimated, which was considered highly satisfactory due to the absence of sample pre-treatments.     

Synthetic olive mill wastewater treatment by Fenton’s process in batch and continuous reactors operation

Degradation of total phenol (TPh) and organic matter, (expressed as total organic carbon TOC), of a simulated olive mill wastewater was evaluated by the Fenton oxidation process under batch and continuous mode conditions. A mixture of six phenolic acids usually found in these agro-industrial wastewaters was used for this purpose. The study focused on the optimization of key operational parameters of the Fenton process in a batch reactor, namely Fe²⁺ dosage, hydrogen peroxide concentration, pH, and reaction temperature. On the assessment of the process efficiency, > 99% of TPh and > 56% of TOC removal were attained when [Fe²⁺] = 100 ppm, [H₂O₂] = 2.0 g/L, T = 30 °C, and initial pH = 5.0, after 300 min of reaction. Under those operational conditions, experiments on a continuous stirred-tank reactor (CSTR) were performed for different space-time values (τ). TOC and TPh removals of 47.5 and 96.9%, respectively, were reached at steady-state (for τ = 120 min). High removal of COD (> 75%) and BOD₅ (> 70%) was achieved for both batch and CSTR optimum conditions; analysis of the BOD₅/COD ratio also revealed an increase in the effluent’s biodegradability. Despite the high removal of lumped parameters, the treated effluent did not met the Portuguese legal limits for direct discharge of wastewaters into water bodies, which indicates that coupled chemical-biological process may be the best solution for real olive mill wastewater treatment.     

Development of an enzyme-linked immunosorbent assay for atrazine monitoring in water samples

The implementation of the Water Framework Directive (2000/60/EC) requires the establishment of monitoring programs. However, conventional procedures for sample preparation prior to chromatographic analysis are rather expensive and time consuming, being the development of cost-effective and easy tool a necessity. The aim of this work was to develop an enzyme-linked immunosorbent assay (ELISA) able to determine atrazine in water samples. Matrix effects evaluation showed that the increase of humic acid (HA) concentration leads to flattened calibration curves and to the loss of the sigmoidal shape. However, such interference was overcome, by the presence of an environmental sample buffer, incubated together with the samples. Recoveries from 88.5 to 119.2 % were obtained in the presence of HA concentrations up to 20 mg?L^?1. An analytical range from 0.003 to 1 μg?L^?1 was obtained, and atrazine was detected in a sewage treatment plant with concentrations ranging from 14 to 52 ng?L^?1.     

A New Ozonated Cassava Film with the Addition of Cellulose Nanofibres: Production and Characterization of Mechanical,Barrier and Functional Properties

Journal of Polymers and the Environment - In this study cassava starch modified by ozone technology and cellulose nanofibres were used to produce films. These nanocomposites were produced by...     

Fluorescence and DOC contents of estuarine pore waters from colonized and non-colonized sediments: effects of sampling preservation

The influence of the colonization of salt marsh sediments with Halimione portulacoides was evaluated by analysing the fluorescent dissolved organic matter (FDOM) in sediment pore waters from a salt marsh at different depths. Cores of sediments at colonized and non-colonized sites were collected from a coastal lagoon (Ria de Aveiro, Portugal). The DOC content of extracted pore waters was determined and characterized by synchronous molecular fluorescence (Deltalambda=60nm) and UV-visible spectroscopies. The common practice of freezing sediment cores for further and later chemical investigation was shown not to be an appropriate methodology of sample preservation. On the contrary, freezing of extracted and filtered pore water seemed not to affect either the DOC content or the fluorescence properties of pore waters. Two types of fluorescent substances were found in the pore waters spectra; one corresponding to humic-like substances and another one resembling proteins. However, major differences were found in the spectra of pore waters depending on both depth and the presence/absence of vegetation colonization.     

Solid-phase extraction and capillary electrophoresis determination of phenols from soil after alkaline CuO oxidation

Alkaline CuO oxidation has been used on molecular-level analyses of phenols from organic matter in the last decades. This method, originally developed by Hedges and Ertel [Hedges, J.I., Ertel, J.R., 1982. Characterization of lignin by gas capillary chromatography of cupric oxide oxidation products. Anal. Chem. 54, 174-178] has several drawbacks that have limited is wider utilization. In this paper, we propose a modification of the method using a solid-phase extraction (SPE) instead of a liquid-liquid extraction. The SPE procedure using C18 cartridges was optimized to obtain high recoveries. The sequential elution with acetonitrile and methanol was found to be the most appropriate procedure. Recoveries of the 12 phenols in individual standard solutions ranged from 84% to 113% with relative standard deviation (RSD) lower than 12%. Experiments with a mixed standard solution highlighted the competition between the different phenols for the adsorbing sites. Recoveries decreased with polarity, reaching 30% for p-hydroxybenzoic acid when present at a concentration of 2.5 x 10(-3)M. A sample soil subjected to a CuO oxidation was used to test the reproducibility of the SPE method and good results were achieved, RSD ranged between 0.4% and 28.3%. The performance of the CE method was also evaluated by correlation coefficients (higher than 0.9920), linearity (higher than 99.902%) and limit of detection (ranging from 2.64 x 10(-6) to 1.25 x 10(-5)M). SPE procedure presents several advantages such as fast sample preparation, good recoveries, good accuracy, low sample handling and safety improvement due to reduced solvent/sample exposure and glassware management.     

Adsorption of the antiepileptic carbamazepine onto agricultural soils

Carbamazepine is an antiepileptic pharmaceutical which is commonly found in environmental matrices. It passes through wastewater treatment plants (WWTPs) almost completely unaffected and has been found to be highly persistent in the environment. The application of sludge in agricultural fields and the use of WWTP effluents for irrigation constitute a potential source of soil contamination. Consequently, the assessment of the interaction between carbamazepine and soils is of crucial importance to understand its fate in the environment. To monitor the sorption behavior of carbamazepine onto agricultural soils, batch equilibrium experiments were performed using soils subjected to distinct long-term fertilizations. In order to follow the adsorption experiments, an UV spectral deconvolution methodology was applied and the results compared with those from micellar electrokinetic chromatography. The results obtained by both methods did not present significant statistical differences at 95% confidence level. Therefore, it was proven that, in the context of adsorption studies, UV spectral deconvolution is a valid alternative to common chromatographic methods, with the major advantage of being a simple and fast procedure. The adsorption of carbamazepine onto the selected soils was satisfactorily described by the Freundlich model. The obtained Freundlich parameters (K(F)) (between 1.79 ± 0.07 and 4.8 ± 0.2 mg kg(-1) (mg L(-1))(-N)) indicate that the adsorption behavior of carbamazepine is dependent on the soil fertilization. Also, it is not extensively sorbed, indicating that carbamazepine present in soils can be a potential source of contamination of surface and ground waters through run-off and infiltration.     

Multivariate curve resolution of multidimensional excitation-emission quenching matrices of a Laurentian soil fulvic acid

Fluorescence excitation–emission matrices (EEM) of aqueous solutions of Laurentian soil fulvic acid (LFA) at three concentrations (50, 75 and 100 mg/l) were obtained at two pH values (pH = 4.0 and 6.0) and as function of the Cu(II) ion concentration. The presence of Cu(II) ion provokes quenching of the intrinsic LFA fluorescence due to complex formation. Multivariate curve resolution (MCR-ALS) was used to successfully decompose single EEM into excitation and emission spectra for the detected components. Moreover, multidimensional (up to six dimensions) data matrices were generated by adding EEM collected as function of the LFA and Cu(II) concentrations and pH. MCR-ALS was able to resolve the excitation and emission spectra from these multidimensional data matrices given further information about the spectral variation profiles induced by the experimental factors. Conditional stability constants (log K_LFACu) were calculated from the quenching profiles observed as function of the Cu(II) concentration, as well as, their trends as function of pH and LFA concentration were obtained – average (and standard deviation) of log K_LFACu = 4.6 ± 0.2. This EEM/MCR-ALS methodology constitutes a new tool for the study of natural organic matter under varying experimental conditions that characterize natural environmental systems.