Safety related questions for computer-controlled plants: derivation, organisation and application

The use of computers in process control has improved productivity and product quality but has also caused a number of accidents. If we learn from these accidents we may be able to prevent them from happening again. This paper advocates a systematic approach to deriving and organising safety-related questions from past incidents and then applying the questions to consider the safety issues related to the whole life-cycle of computer-controlled plants. Over 170 questions were derived from 300 incident reports provided by two major organisations. The questions are organised into a structured framework so that relevant questions can be located easily when considering different aspects of a computer-controlled plant. Examples illustrating the application of the questions are given. The whole set of questions is listed in the Appendix.     

Environmental design implementation in Taiwan's industries

This study investigated Taiwan's industries to identify the characteristics of companies most advanced in environmental design. Thirty design principles in five categories were used to define advanced environmental design. The five categories are: use of raw materials, use of energy, design for recyclability, product life cycle assessment, and packaging optimization. We found that of the 30 design principles only eight were applied consistently by Taiwanese manufacturers. Most effort was given to the “use of energy” category. The most advanced environmental design was found at large companies—those with over 2000 employees, 3 billion in capital, and/or 3 billion in annual sales.     

Development of bacteria and benthic total maximum daily loads: a case study, Linville Creek, Virginia

Two total maximum daily load (TMDL) studies were performed for Linville Creek in Rockingham County, Virginia, to address bacterial and benthic impairments. The TMDL program is an integrated watershed management approach required by the Clean Water Act. This paper describes the procedures used by the Center for TMDL and Watershed Studies at Virginia Tech to develop the Linville Creek TMDLs and discusses the key lessons learned from and the ramifications of the procedures used in these and other similar TMDL studies. The bacterial impairment TMDL was developed using the Hydrological Simulation Program-Fortran (HSPF). Fecal coliform loads were estimated through an intensive source characterization process. The benthic impairment TMDL was developed using the Generalized Watershed Loading Function (GWLF) model and the reference watershed approach. The bacterial TMDL allocation scenario requires a 100% reduction in cattle manure direct-deposits to the stream, a 96% reduction in nonpoint-source loadings to the land surface, and a 95% reduction in wildlife direct-deposits to the stream. Sediment was identified as the primary benthic stressor. The TMDL allocation scenario for the benthic impairment requires an overall reduction of 12.3% of the existing sediment loads. Despite the many drawbacks associated with using watershed-scale models like HSPF and GWLF to develop TMDLs, the detailed watershed and pollutant-source characterization required to use these and similar models creates information that stakeholders need to select appropriate corrective measures to address the cause of the water quality impairment when implementing the TMDL.     

Potential Impact of Climate Change on Residential Energy Consumption in Dhaka City

This study aimed to assess the impacts of climate change on residential energy consumption in Dhaka city of Bangladesh. The monthly electricity consumption data for the period 2011–2014 and long-term climate variables namely monthly rainfall and temperature records (1961–2010) were used in the study. An ensemble of six global circulation models (GCMs) of coupled model intercomparison project phase 5 (CMIP5) namely, BCCCSM1-1, CanESM2, MIROC5, MIROC-ESM, MIROC-ESM-CHEM, and NorESM1-M under four representative concentration pathway (RCP) scenarios were used to project future changes in rainfall and temperature. The regression models describing the relationship between historical energy consumption and climate variables were developed to project future changes in energy consumptions. The results revealed that daily energy consumption in Dhaka city increases in the range of 6.46–11.97 and 2.37–6.25 MkWh at 95% level of confidence for every increase of temperature by 1 °C and daily average rainfall by 1 mm, respectively. This study concluded that daily total residential energy demand and peak demand in Dhaka city can increase up to 5.9–15.6 and 5.1–16.7%, respectively, by the end of this century under different climate change scenarios.     

Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

Prioritization of water management for sustainability using hydrologic simulation model and multicriteria decision making techniques

The objective of this study is to develop an alternative evaluation index (AEI) in order to determine the priorities of a range of alternatives using both the hydrological simulation program in FORTRAN (HSPF) and multicriteria decision making (MCDM) techniques. In order to formulate the HSPF model, sensitivity analyses of water quantity (peak discharge and total volume) and quality (BOD peak concentrations and total loads) are conducted and a number of critical parameters were selected. To achieve a more precise simulation, the study watershed is divided into four regions for calibration and verification according to landuse, location, slope, and climate data. All evaluation criteria were selected using the Driver–Pressure–State–Impact–Response (DPSIR) model, a sustainability evaluation concept. The Analytic Hierarchy Process is used to estimate the weights of the criteria and the effects of water quantity and quality were quantified by HSPF simulation. In addition, AEIs that reflected residents' preferences for management objectives are proposed in order to induce the stakeholder to participate in the decision making process.     

Environmental estrogenic effects and gonadal development in wild goldfish (Carassius auratus)

Serum vitellogenin (VTG) contents of wild goldfish (Carassius auratus) were investigated as a sensitive biomarker for artificial estrogenic compounds in aquatic environments. Goldfish was sampled from a pristine area, a river situated 5 km downstream from a sewage treatment works (STW), and also from the Young-San River in Korea. The female yolk precursor protein VTG was not detected when gonadosomatic index (GSI) was less than 0.85%, while VTG levels of >10 microg/ml were found in males whose GSI was less than 1.53%. In male goldfish sampled from STW and the Young-San River, the higher VTG corresponded to lower GSI. This study suggested a trend that gonad development was connected to VTG levels in both sexes, and the application of GSI and histological analysis provide an attractive possibility that it could be included in the panel of markers used for estrogenic activity investigation of aquatic environments.     

Distribution and pollution sources of polycyclic aromatic hydrocarbons (PAHs) in reclaimed tidelands and tidelands of the western sea coast of South Korea

The wide-scale reclamation of tidal flats distributed throughout the western and southern coastal areas in Korea has been completed, in an effort to expand the available arable land. The present studies were conducted in order to characterize the concentrations and compositional patterns of selected PAHs, in order to obtain more information regarding environmental risk assessments for sustainable and environment-friendly agriculture in reclaimed tidelands and tidelands in South Korea. The PAH contents were low to moderate, relative to other urbanized regions of the world. Sigma PAHs ranged from 69.8 to 1,175.2 ng g(-1) in dry weight, with a mean value of 394.4 ng g(-1). Differences were observed in the Sigma PAHs concentrations between industrial complex areas and rural regions. The two dominant PAHs were identified as fluoranthene and pyrene. These compounds constituted 1.4 to 55.0% (mean, 33.4%) and 2.7 to 45.6% (mean, 22.0%) of the Sigma PAHs. Our correlation analysis revealed that the Sigma PAHs contents were associated significantly with the organic carbon content (R(2) = 0.86, P < 0.01) and the cation exchange capacity (CEC; R(2) = 0.89, P < 0.01) in the reclaimed tidelands and tidelands.     

Dietary exposure to DDT of secondary school students in Hong Kong

The aim of this study was to determine the dietary exposure of DDT in foodstuffs consumed in Hong Kong by secondary school students in Hong Kong in 2005. Food samples of domestic or imported food were collected randomly from local markets for the determination of DDT. The analytical method for this survey was based on isotope dilution technique. DDT isomers were determined at parts per billion (mugkg(-1)) levels in foods by pressured fluid extraction followed by gel permeation column cleanup and gas chromatography with mass spectrometry detection. Among the 98 composite samples, 25 were found positive with DDT levels greater than the limit of quantitation (LOQ) (1mugkg(-1) for each isomer of DDT). Only two of the meat products were found to contain low levels of the metabolites of DDT. A number of fish and shellfish were found to contain not just the metabolites of DDT, but also parent DDT. The main contribution to DDT was from seafood. The dietary intake of DDT for an average and high secondary school student consumers were estimated to be 0.145 and 0.291mugkg(-1)bwd(-1), respectively. Both levels fell well below the Provisional Tolerable Daily Intake (PTDI) of 10mugkg(-1)bwd(-1) established by the Joint Food Agriculture Organization/World Health Organization Meeting on Pesticide Residues (JMPR). It was concluded that both the average and high secondary school student consumers were unlikely to experience major toxicological effects of DDT.