Spent sulfuric acid plant catalyst: valuable resource of vanadium or risky residue? Process comparison for environmental implications

Environmental Science and Pollution Research - The enormous amount of spent catalysts generated worldwide may pose a risk to the environment because of their high load of metals, including...     

The conceptual model of an eco-industrial park based upon ecological relationships

The necessity to follow the rules of sustainable development in the everyday industrial practice has led to the formulation of the concept of an industrial ecosystem mimicking the natural ecosystem. Following this analogy, the conceptual model of an eco-industrial park, which is an organised form of the industrial ecosystem, was presented in this paper. The model comprises of (1) the structure of the ecosystem, (2) the classification of the enterprises as producers, consumers and decomposers, (3) mass and energy flows and (4) types of interactions. The classification of the enterprises introduced here as well as the analysis of mass and energy flows indicates that the diversity of the enterprises in eco-industrial parks is desired. Furthermore, the minimal condition to create the symbiotic relationships between the enterprises is established, claiming that at least one industrial producer or decomposer must be involved in the eco-industrial park. The application of this model will facilitate the design and development of eco-industrial parks and enable the identification of symbiotic relationships between the entities of such a park and other types of industrial ecosystems. In order to show the applicability of the proposed model and its potential for the practical implementation two case studies are presented.     

Discrete and time-integrated sampling for chromium load calculations in a watershed with an impoundment reservoir at an exceptionally low water level

Instantaneous (discrete) and time-integrated (composed) samples were collected during a 19-week period in a watershed impacted by discontinuous discharges from local tanneries (Carpathians Mountains, Poland). Existence of the impoundment reservoir in this watershed allowed investigation of its role in chromium transport. In collected samples, dissolved and particulate chromium concentrations were measured to apportion both loads. This study has demonstrated that the impoundment reservoir retains not only particulate but also a dissolved form of chromium and its efficiency reaches 74–94 %. Sampling results proved that chromium contamination in the investigated river is variable and discontinuous. Discrete sampling can lead to an underestimation of chromium contamination level (up to 78 %), especially when illegal/unexpected discharges occur in the watershed. A discrete sampling regime also produces less reliable data for contaminant budget calculations, especially in sites where strong variability of contamination is anticipated, while at the output from reservoirs, the load can be reasonably estimated using this mode of sampling.     

The need for ecocentrism in biodiversity conservation

Over the past 5 decades, scientists have been documenting negative anthropogenic environmental change, expressing increasing alarm, and urging dramatic socioecological transformation in response. A host of international meetings have been held, but the erosion of biological diversity continues to accelerate. Why, then, has no effective political action been taken? We contend that part of the answer may lie in the anthropocentric ethical premises and moral rhetoric typically deployed in the cause of conservation. We further argue that it is essential to advance moral arguments for biodiversity conservation that are not just based on perceived human interests but on ecocentric values, namely, convictions that species and ecosystems have value and interests that should be respected regardless of whether they serve human needs and aspirations. A broader array of moral rationales for biodiversity conservation, we conclude, would be more likely to lead to effective plans, adopted and enforced by governments, designed to conserve biological diversity. A good place to start in this regard would be to explicitly incorporate ecocentric values into the recommendations that will be made at the conclusion of the 15th meeting of the parties to the Convention on Biological Diversity, scheduled to be held in October 2020.     

Calibration of the Chemcatcher passive sampler for the monitoring of priority organic pollutants in water

An integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low-density polyethylene diffusion membrane was calibrated for the measurement of time-weighted average concentrations of hydrophobic micropollutants, including polyaromatic hydrocarbons and organochlorine pesticides, in water. The effect of temperature and water turbulence on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water was studied in a flow-through system under controlled conditions. It was found that the absorption of test analytes from water to the sampler is related to their desorption to water. This allows for the in situ calibration of the uptake of pollutants using offload kinetics of performance reference compounds. The sampling kinetics are dependent on temperature, and for most of the tested analytes also on the flow velocity. Sampler-water partition coefficients did not significantly change with temperature.     

Occurrence of Norovirus and Hepatitis A Virus in Wild Mussels Collected from the Baltic Sea

The aim of the study was to define the occurrence of human noroviruses of genogroup I and II (NoV GI and NoV GII) and hepatitis A virus (HAV) in the Baltic Sea mussels. The shellfish samples were taken at the sampling sites located on the Polish coast. In total, 120 shellfish were tested as pooled samples using RT-PCR and hybridisation with virus specific probes. NoV GI was detected in 22 (18.3 %), NoV GII in 28 (23.3 %), and HAV in 9 (7.5 %) of the shellfish. The nucleotide sequence analysis of the detected NoV GII strains showed a 97.3–99.3 % similarity to GII.4 virus strain. This is the first report describing the NoV and HAV occurrence in wild Baltic mussels and their possible role as bioindicators of seawater contamination with human enteric viruses.     

Preparation of magnetic nanocomposite beads and optimizing the conditions for effective removal of U(VI) from aqueous solutions

Magnetic ion-imprinted polymers (IIPs) were prepared by precipitate polymerization and leached with HCl to remove uranium. Their ability to remove hexavalent uranium from wastewater effluents was studied. Batch adsorption studies to determine the optimum conditions of U(VI) removal were conducted at different levels of sample pH, sorbent amount, agitation time, and initial uranium concentration. It was observed that, under optimum conditions (i.e. pH 4, adsorbent amount of 50 mg, 45 min agitation time, and initial U(VI) concentration of 2 mg L^?1), the maximum removal of U(VI) cations was >98% and 80% for the magnetic IIP and the corresponding magnetic non-imprinted polymers (NIP), respectively. Langmuir and Freundlich isotherms were used to describe the adsorption of U(VI) onto magnetic IIP and NIP. The adsorption capacity of U(VI) was determined to be 1.06 and 0.85 mg g^?1 for the two isotherms, respectively. The order of selectivity was found to be U(VI) > Fe(III) > Pb(II). For six cycles of regeneration and reuse, the magnetic polymers maintained their stabilities with only a 4% loss in the extraction efficiency. The average extraction efficiencies of the magnetic polymers for the spiked acid mine drainage and sewage wastewater effluents were 71% and 58% for the magnetic IIP and NIP, respectively. From powder X-ray diffraction analysis, application of the Scherrer equation yielded magnetic nanoparticles of an average mean diameter of 11.9 nm. Thermo-gravimetric analysis revealed that the HCl-leached magnetic polymers had a magnetite residual weight of 5%.     

Tailoring mesoporosity of poly(furfuryl alcohol)-based activated carbons and their ability to adsorb organic compounds from water

In this work it was shown that polymers can be recycled into a promising adsorbent for organic dyes and phenols waste removal. For this, a series of activated carbons (ACs) were produced from mixture of ferrocene or titanium acetylacetonate with poly(furfuryl alcohol) (PFA) by steam activation. The introduction of ferrocene as Fe precursor was found to be an efficient catalyst in mesoporosity development during carbonization and subsequent steam activation at 850 °C, whereas the polymer based only and titanium-doped ACs are typically microporous. The porous structure parameters were determined from nitrogen adsorption isotherms measured at 77 K. Scanning electron microscopy was applied to monitor the metal distribution of metal-loaded char and the surface morphology of activated carbons. The adsorption capacity was found to be dependent mainly on pore size distribution. In the case of phenol adsorption, the adsorption was defined by volume of pore with size 0.8–1.4 nm; whereas, for Congo red best fit was observed for volume of pore with size 2–5 nm.