Dust-particle migration around flotation tailings ponds: pine needles as passive samplers

The potential use of dust particles trapped on Scots pine needles for tracking dust migration around flotation tailings ponds in the Silesian-Krakowian ore district, Southern Poland was tested. 1-, 2- and 3-years old needles were studied using a scanning electron microscope and energy dispersive X-ray microanalysis. Particle sizes and morphologies, and the nature of the compounds hosting metals ions, were examined. A large majority of the particles examined are <10 microm in size. Almost 80% of particles represent respirable dust. All the components in the flotation wastes appear among the chemical compounds identified in particles on the pine needles. The quantity of the waste particles decreases with distance from the flotation tailings ponds. The analysis of dust particles on pine needles could be a useful method for estimating vectors and travel distances of suspended dust migrating around open flotation tailings ponds and around other point sources emitting dust particles with chemical compositions differing from the environmental background.     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.     

The development and evaluation of accident prevention routines: A case study

Information resulting from the occurrence of accidents and near-accidents is the basis for most accident prevention efforts. However, such information may not normally be incorporated into local safety activities. A group to assist supervisors in their investigations of accidents and a procedure to prompt the reporting of near-accidents by employees were tested at one company as means of improving local safety activities. The accident investigation group was in operation in all departments and was associated with improved accident reporting and prevention activities as well as a reduction in accident severity. The near-accident reporting procedure was tested in one department and led to improved knowledge about risks, although no reductions in accident frequency and severity were shown. On the basis of these results, the company safety committee decided at the end of the first year to extend the mandate of the investigation group but not to continue with near-accident reporting. Follow-ups after 2 and 3 years indicated that improvements in prevention activities had been maintained and that accident severity had been further reduced.     

Ion mobility based on column leaching of South African gold tailings dam with chemometric evaluation

New column leaching experiments were designed and used as an alternative rapid screening approach to element mobility assessment. In these experiments, field-moist material was treated with an extracting solution to assess the effects of acidification on element mobility in mine tailings. The main advantage of this version of column leaching experiments with partitioned segments is that they give quick information on current element mobility in conditions closely simulating field conditions to compare with common unrepresentative air-dried, sieved samples used for column leaching experiments. Layers from the tailings dump material were sampled and packed into columns. The design of columns allows extracting leachates from each layer. The extracting solutions used were natural (pH 6.8) and acidified (pH 4.2) rainwater. Metals and anions were determined in the leachates. The concentrations of metals (Ca, Mg, Fe, Mn, Al, Cr, Ni, Co, Zn, and Cu) in sample leachates were determined using ICP OES. The most important anions (NO3-, Cl-, and SO4(2)-) were determined using the closed system izotacophoresis ITP analyser. The chemical analytical data from tailings leaching and physico-chemical data from field measurements (including pH, conductivity, redox potential, temperature) were used for chemometric evaluation of element mobility. Principal factor analysis (PFA) was used to evaluate ions mobility from different layers of tailings dump arising from varied pH and redox conditions. It was found that the results from the partitioned column leaching illustrate much better complex processes of metals mobility from tailings dump than the total column. The chemometric data analysis (PFA) proofed the differences in the various layers leachability that are arising from physico-chemical processes due to chemical composition of tailings dump deposit.     

Early-phase immunodetection of metallothionein and heat shock proteins in extruded earthworm coelomocytes after dermal exposure to metal ions

This paper provides direct evidence that earthworm immune cells, coelomocytes, are exposed to bio-reactive quantities of metals within 3 days after dermal exposure, and that they respond by upregulating metallothionein (MT) and heat shock protein (HSP70, HSP72) expression. Indirect support for the hypothesis that coelomocytes are capable of trafficking metals was also obtained. Coelomocytes were expelled from adult individuals of Eisenia fetida after 3-day exposure either to metal ions (Zn, Cu, Pb, Cd) or to distilled water (controls) via filter papers. The number of coelomocytes was significantly decreased after Cu, Pb, or Cd treatment. Cytospin preparations of coelomocytes were subjected to immunoperoxidase staining with monoclonal antibodies against human heat shock proteins (HSP70 or HSP72), or rabbit polyclonal antibodies raised against metallothionein 2 (w-MT2) of Lumbricus rubellus. Applied antibodies detected the respective proteins of E. fetida and revealed that the expression of HSP70, HSP72 and w-MT2 proteins was either induced or significantly enhanced in coelomocytes from metal-exposed animals. In conclusion, stress protein expression in earthworm coelomocytes may be used as sensitive biomarkers of metal contaminations. Further experimentation is needed for quantitative analysis of kinetics of metal-induced stress protein expression in earthworm coelomocytes.     

Temporal and spatial relationships in fine particle strong acidity, sulphate, PM1O, and PM2.5 across multiple canadian locations

The Canadian Acid Aerosol Measurement Program (CAAMP) was established in 1992 to gain a better understanding of the atmospheric behaviour of fine particle strong acidity (“acid aerosols”) and to facilitate an assessment of the potential health risks associated with acid aerosols and particles in general. During 1992. 1993 and 1994, annular denuder and filter measurements were taken at four sites in Ontario, two in Quebec, three in the Atlantic Provinces and one in the greater Vancouver area. Mean fine particle sulphate concentrations (SO₄²⁻) were highest in southern Ontario (annual average ranged from 40–70 nmol m⁻³), lowest at a site in the Vancouver area (average = 16 nmol m⁻³) and second lowest in rural Nova Scotia. However, mean fine particle strong acid concentrations (H⁺) were geographically different. The highest mean concentrations were at the east coast sites (annual average of up to 30 nmol m⁻³). Acidities were lower in areas where the fine particle acidity experienced greater neutralization from reaction with ammonia. This included the major urban centres (i.e. Toronto and Montréal) and areas with greater amounts of agricultural activity, as in rural southern Ontario. On average, ambient concentrations of fine and coarse particle mass were larger in the urban areas and also in areas where SO₄²⁻ levels were higher. All the particle components were episodic. However, compared to SO₄²⁻ and fine particles (PM_2.5 or PM_2.1, depending upon inlet design), episodes of H⁺ tended to be less frequent and of shorter duration, particularly in Ontario. Saint John, New Brunswick, had the highest mean annual H⁺ concentration, which was 30 nmol m⁻³. H⁺ episodes (24 h concentration > 100 nmol m⁻³) were also the most frequent at this location. The high levels in Saint John were partially due to local sulphur dioxide sources and heterogeneous chemistry occurring in fog, which, on average, led to a 50% enhancement in sulphate, relative to upwind conditions.There was a substantial amount of intersite correlation in the day to day variations in H⁺, SO₄²⁻ , PM_2.5 and PM₁₀ (fine + coarse particles) concentrations, which is due to the influence of synoptic-scale meteorology and the relatively long atmospheric lifetime of fine particles. Sulphate was the most regionally homogenous species. Pearson correlation coefficients comparing SO₄²⁻ between sites ranged from 0.6 to 0.9, depending on site separation and lag time. In many cases, particle episodes were observed to move across the entire eastern portion of Canada with about a two-day lag between the SO₄²⁻ levels in southern Ontario and in southern Nova Scotia.     

The effect of spent bleaching earth ageing process on its physicochemical and microbial composition and its potential use as a source of fatty acids and triterpenes

This study was aimed at investigating the physicochemical and microbiological changes that took place during the ageing process of spent bleaching earth in the presence of autochthonous microorganisms. Research material included fresh spent bleaching earth (SBE₀) and the same material after 3 years of storage at the constant temperature of 20 °C, without aeration and moistening (SBE₃). Changes in the chemical composition of analysed waste material were observed during its ageing process point to a spontaneous bioconversion of fat substance towards formation and/or release of free saturated fatty acids C16:0 and C18:0 (14.3 g 100 g^?1 D.M.), triterpenes (8.48 g 100 g^?1 D.M.), cholesterol (3.29 g 100 g^?1 D.M.), small quantities of carbohydrates and esters (0.80 g 100 g^?1 D.M.). This process was accompanied by other changes in physicochemical parameters of the waste material, such as colour, odour and viscosity, decrease in fat content from 28.27 to 24.6 % and that of soluble forms of metals (Mo, Cu, Fe, Zn, Ni, Cr and Mn), ranging from 25 to 75 %, and an increase in pH, from 3.85 to 4.2. At the same time, changes in the microbial consortium were observed.     

Heavy metals affect the coelomocyte-bacteria balance in earthworms: environmental interactions between abiotic and biotic stressors

Three-day dermal exposure of Dendrobaena veneta to metal ions differentially disrupts the immunocompetence/pathogen balance. Zn does not accumulate in the earthworm body, Cu accumulation is temperature-independent while Cd accumulation is stronger at 22 degrees C than at 10 degrees C. During in vitro incubation with metal ions at 22 degrees C, growth of coelom-derived bacteria is enhanced by Zn, but significantly or almost completely inhibited by Cu or Cd. In contrast, under in vivo conditions at 22 degrees C, bacterial load is decreased only after Cd exposure, but increased after Zn and Cu exposures. At 10 degrees C bacteria growth is almost completely inhibited in all groups except Cu-treated animals. Coelomocyte number is unaffected in animals exposed to Zn, but significantly decreased after exposure to Cd (at 22 degrees C) and Cu (at 22 degrees C and 10 degrees C) with concomitant changes of amoebocyte-to-eleocyte ratio in favour of amoebocytes. Metal exposure up-regulates expression of metallothioneins in coelomocytes, mainly amoebocytes.     

Procedures of trophic chain samples preparation for determination of triazines by HPLC and metals by ICP-AES methods

The aim of this research was monitoring the distribution of atrazine and simazine as well as metals Pb, Cd, Zn, Al, Co, Ni, and V along with trophic chains: soil-vegetables and soil, carrot or grass and meat. Different techniques of herbicides extraction by means of many solvents were examined. Triazines were analysed by means of HPLC, metals by means of ICP-AES. Detection limits: LOD=0.2 microg ml(-1), determination limits: LOQ=0.73 microg ml(-1) for atrazine and LOD=0.3 microg ml(-1), LOQ=1.12 microg ml(-1) for simazine were obtained. The content (microg g(-1)) of simazine in soil was in range: 3.45-8.60, in vegetable roots: 6.62-38.15, in vegetable leaves: 2.45-31.71, in rabbit fat: 0.13-49.90. The content (microg g(-1)) of atrazine in soils was in range: 11.9-13.03, in vegetable roots: 13.61-92.90. In analysed material the particular metals after microwave or dry digestion were determined in range (microg g(-1)): Pb: 6.48-43.18; Cd: 0.11-0.57; Zn: 8.79-51.90; Al: 10.22-24.48; Co: 0.18-3.89; Ni: 0.37-6.36; V: 0.29-1.48.