Air-mediated pollen flow from genetically modified to conventional crops.

Tools for estimating pollen dispersal and the resulting gene flow are necessary to assess the risk of gene flow from genetically modified (GM) to conventional fields, and to quantify the effectiveness of measures that may prevent such gene flow. A mechanistic simulation model is presented and used to simulate pollen dispersal by wind in different agricultural scenarios over realistic pollination periods. The relative importance of landscape-related variables such as isolation distance, topography, spatial configuration of the fields, GM field size and barrier, and environmental variation are examined in order to find ways to minimize gene flow and to detect possible risk factors. The simulations demonstrated a large variation in pollen dispersal and in the predicted amount of contamination between different pollination periods. This was largely due to variation in vertical wind. As this variation in wind conditions is difficult to control through management measures, it should be carefully considered when estimating the risk of gene flow from GM crops. On average, the predicted level of gene flow decreased with increasing isolation distance and with increasing depth of the conventional field, and increased with increasing GM field size. Therefore, at a national scale and over the long term these landscape properties should be accounted for when setting regulations for controlling gene flow. However, at the level of an individual field the level of gene flow may be dominated by uncontrollable variation. Due to the sensitivity of pollen dispersal to the wind, we conclude that gene flow cannot be summarized only by the mean contamination; information about the frequency of extreme events should also be considered. The modeling approach described in this paper offers a way to predict and compare pollen dispersal and gene flow in varying environmental conditions, and to assess the effectiveness of different management measures.     

Twenty years of PET bottle to bottle recycling—An overview

Polyethylene terephthalate (PET) has become the most favourable packaging material world-wide for beverages. The reason for this development is the excellent material properties of the PET material, especially its unbreakability and the very low weight of the bottles compared to glass bottles of the same filling volume. Nowadays, PET bottles are used for softdrinks, mineral water, energy drinks, ice teas as well as for more sensitive beverages like beer, wine and juices. For a long time, however, a bottle-to-bottle recycling of post-consumer PET packaging materials was not possible, because of the lack of knowledge about contamination of packaging polymers during first use or recollection. In addition, the decontamination efficiencies of recycling processes were in most cases unknown. During the last 20 years, PET recollection as well as recycling processes made a huge progress. Today, sophisticated decontamination processes, so-called super-clean recycling processes, are available for PET, which are able to decontaminate post-consumer contaminants to concentration levels of virgin PET materials. In the 1991, the first food contact approval of post-consumer PET in direct food contact applications has been given for post-consumer recycled PET in the USA. Now, 20 years after the first food approval of a PET super-clean recycling process, this article gives an overview over the world-wide progress of the bottle-to-bottle recycling of PET beverage bottles, e.g. the recollection amount of post-consumer PET bottles and the super-clean recycling technologies.     

系统改革商界面临的最大挑战与机遇

商界领袖们投入几乎所有的时间在经济和政治系统内运作,遵守着这些系统内部的“游戏规则”。他们很少考虑这样构一些问题,比如：这些规则正确吗？究竟是什么潜在的假设在指导着经济和政治系统？商业最终的目标和意图是什么？我们是在实现这个目：际和意图的过程中吗？如果不是,原因何在？什么需要改变？     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.     

Residues of organochlorine pesticides in near shore waters of LaiZhou Bay and JiaoZhou Bay, Shandong Peninsula, China

The extent of organochlorine pesticides (OCPs) contamination in coastal waters around LaiZhou Bay and JiaoZhou Bay in Shandong Peninsula, northern China, was investigated. The areas around the two bays are both densely populated, thrive with intensive agriculture and industrial activities. Multi-techniques including GC-MS, GC-muECD coupled with chemical peak confirmation and strict QC procedures were used for the quantitative determination of 15 OCPs including alpha, beta, gamma and delta isomers of hexachlorocyclohexane (HCH), pentachloronitrobenzene (PCNB), heptachlor, aldrin, endosulfan, p,p'-DDE, dieldrin, endrin, p,p'-DDD, o,p'-DDT, p,p'-DDT and methoxychlor. The survey results show that contaminations by OCP residues remain widespread in the areas, but the averaged concentration levels are all below the regulatory limits, e.g., CMC limits (acute criterion values) specified in US Environmental Protection Agency (USEPA) and China national standards. Average concentration of OCPs in water samples were from undetectable to 3.8 ng l(-1) in LaiZhou Bay and from 0.1 to 3.9 ng l(-1) in JiaoZhou Bay, respectively. A comparison between the current and historical data shows a rapidly decreasing trend of OCPs over the past twenty years in the study areas.     

Mercury fate in ageing and melting snow: development and testing of a controlled laboratory system

A snow cover can modify when, to what extent, and in what form atmospherically deposited mercury is released to the underlying surface media and/or back to the atmosphere. Investigations of mercury transport and transformation processes in snow packs are hampered by the difficulty in controlling experimental and melt conditions and due to the huge variability in the composition and physical structure of environmental snow packs. A method was developed that allows the detailed mechanistic investigation of mercury fate in snow that is made, aged and melted under controlled laboratory conditions. A number of control samples established that mercury in indoor air, scavenged during the snow making process, constitutes the dominant source of mercury in the artificial snow. No addition of mercury is required. The amount of mercury in fresh snow was quantitatively (102 and 106% in two experiments) recovered in the dissolved and particulate fractions of the melt water and the vessel head space, confirming a mass balance for mercury and the absence of unquantifiable mercury sources and sinks in the experimental system. In snow made from unmodified tap water, more than half of the mercury present in the snowpack was recovered from the bottom of the snow vessel after all of the snow had melted. Such late elution is indicative of mercury being mostly associated with particles that are filtered by, and retained in, the shrinking snowpack. Addition of salt to the snow-making water at an environmentally realistic pH notably shifted the distribution of mercury in the snowpack from the particulate to the dissolved phase, resulting in more than 60% of the mercury eluting in the dissolved phase of early melt water fractions.     

Correcting sample selection in FARS data to estimate seatbelt use

Introduction

In this paper, we show that FARS data can be a comparable alternative to observational NOPUS data in estimating seat belt use in the United States once we correct for sample selection bias.

Results

Based on assumptions of independence for seatbelt choice, we establish a lower and upper bound for seatbelt usage rates, and find that once we correct for sample selection bias, the seatbelt usage estimates from the corrected FARS emerge at least as a comparable alternative to NOPUS estimates.

Impact on Industry

This implies that researchers can use corrected FARS to complement NOPUS, thus being able to utilize the rich cross-sectional details available in FARS data to analyze various relevant research questions.     

Odour-based species recognition in two sympatric species of sac-winged bats (<Emphasis Type="Italic">Saccopteryx bilineata,S. leptura)</Emphasis>: combining chemical analyses,behavioural observations and odour preference tests

Combining chemical analysis and odour preference tests, we asked whether two closely related sympatric species of sac-winged bats use odour for species recognition. Males of the two sister species Saccopteryx bilineata and Saccopteryx leptura have pouches containing an odoriferous liquid in their antebrachial wing membrane, which is used in S. bilineata during courtship displays. Although both species occasionally share the same daytime roosts and are morphologically similar, there is no evidence for interbreeding. We compared the production and composition of the wing sac odorant in male S. leptura and S. bilineata and performed odour preference tests with female S. bilineata. Similar to male S. bilineata, male S. leptura cleansed and refilled their wing sacs with secretions, but they spent more time each day in doing so than male S. bilineata. Chemical analysis by gas chromatography and mass spectrometry revealed that male Saccopteryx carried species-specific scents in their wing sacs. Binary choice tests confirmed that female S. bilineata preferred the wing sac scents of male S. bilineata to those of the sister species, suggesting that the species specificity of male wing sac scents maintain the pre-mating isolation barrier between these closely related species.