Degassing of H/He, CFCs and SF6 by denitrification: Measurements and two-phase transport simulations

The production of N₂ gas by denitrification may lead to the appearance of a gas phase below the water table prohibiting the conservative transport of tracer gases required for groundwater dating. We used a two-phase flow and transport model (STOMP) to study the reliability of ³H/³He, CFCs and SF₆ as groundwater age tracers under agricultural land where denitrification causes degassing. We were able to reproduce the amount of degassing (R² = 69%), as well as the ³H (R² = 79%) and ³He (R² = 76%) concentrations observed in a ³H/³He data set using simple 2D models. We found that the TDG correction of the ³H/³He age overestimated the control ³He/³He age by 2.1 years, due to the accumulation of ³He in the gas phase. The total uncertainty of degassed ³H/³He ages of 6 years (± 2 σ) is due to the correction of degassed ³He using the TDG method, but also due to the travel time in the unsaturated zone and the diffusion of bomb peak ³He. CFCs appear to be subject to significant degradation in anoxic groundwater and SF₆ is highly susceptible to degassing. We conclude that ³H/³He is the most reliable method to date degassed groundwater and that two-phase flow models such as STOMP are useful tools to assist in the interpretation of degassed groundwater age tracer data.     

A detailed field-based evaluation of naphthenic acid mobility in groundwater

An anaerobic plume of process-affected groundwater was characterized in a shallow sand aquifer adjacent to an oil sands tailings impoundment. Based on biological oxygen demand measurements, the reductive capacity of the plume is considered minimal. Major dissolved components associated with the plume include HCO₃, Na, Cl, SO₄, and naphthenic acids (NAs). Quantitative and qualitative NA analyses were performed on groundwater samples to investigate NA fate and transport in the subsurface. Despite subsurface residence times exceeding 20 years, significant attenuation of NAs by biodegradation was not observed based on screening techniques developed at the time of the investigation. Relative to conservative tracers (i.e., Cl), overall NA attenuation in the subsurface is limited, which is consistent with batch sorption and microcosm studies performed by other authors. Insignificant biological oxygen demand and low concentrations of dissolved As (< 10 µg L^− 1) in the plume suggest that the potential for secondary trace metal release, specifically As, via reductive dissolution reactions driven by ingress of process-affected water is minimal. It is also possible that readily leachable As is not present in significant quantities within the sediments of the study area. Thus, for similar plumes of process-affected groundwater in shallow sand aquifers which may occur as oil sands mining expands, a reasonable expectation is for NA persistence, but minimal trace metal mobilization.     

Binding of polycyclic aromatic hydrocarbons by humic acids formed during composting

Binding of two model polycyclic aromatic hydrocarbons (PAHs), phenanthrene and pyrene, by humic acids (HAs) isolated from an organic substrate at different stages of composting and a soil was investigated using a batch fluorescence quenching method and the modified Freundlich model. With respect to soil HA, the organic substrate HA fractions were characterized by larger binding affinities for both phenanthrene and pyrene. Further, isotherm deviation from linearity was larger for soil HA than for organic substrate HAs, indicating a larger heterogeneity of binding sites in the former. The composting process decreased the binding affinity and increased the heterogeneity of binding sites of HAs. The changes undergone by the HA fraction during composting may be expected to contribute to facilitate microbial accessibility to PAHs. The results obtained also suggest that bioremediation of PAH-contaminated soils with matured compost, rather than with fresh organic amendments, may result in faster and more effective cleanup.     

C60 fullerene: a powerful antioxidant or a damaging agent? The importance of an in-depth material characterization prior to toxicity assays

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C₆₀ is still controversially discussed.The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C₆₀ fullerene in comparison to water stirred C₆₀ fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract.We could demonstrate that water-soluble side products which were formed in THF nC₆₀ suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.     

Modeling the Hydrology of Climate Change in California’s Sierra Nevada for Subwatershed Scale Adaptation1

Young, Charles A., Marisa I. Escobar‐Arias, Martha Fernandes, Brian Joyce, Michael Kiparsky, Jeffrey F. Mount, Vishal K. Mehta, David Purkey, Joshua H. Viers, and David Yates, 2009. Modeling the Hydrology of Climate Change in California’s Sierra Nevada for Subwatershed Scale Adaptation. Journal of the American Water Resources Association (JAWRA) 45(6):1409‐1423. Abstract: The rainfall‐runoff model presented in this study represents the hydrology of 15 major watersheds of the Sierra Nevada in California as the backbone of a planning tool for water resources analysis including climate change studies. Our model implementation documents potential changes in hydrologic metrics such as snowpack and the initiation of snowmelt at a finer resolution than previous studies, in accordance with the needs of watershed‐level planning decisions. Calibration was performed with a sequence of steps focusing sequentially on parameters of land cover, snow accumulation and melt, and water capacity and hydraulic conductivity of soil horizons. An assessment of the calibrated streamflows using goodness of fit statistics indicate that the model robustly represents major features of weekly average flows of the historical 1980‐2001 time series. Runs of the model for climate warming scenarios with fixed increases of 2°C, 4°C, and 6°C for the spatial domain were used to analyze changes in snow accumulation and runoff timing. The results indicated a reduction in snowmelt volume that was largest in the 1,750‐2,750 m elevation range. In addition, the runoff center of mass shifted to earlier dates and this shift was non‐uniformly distributed throughout the Sierra Nevada. Because the hydrologic model presented here is nested within a water resources planning system, future research can focus on the management and adaptation of the water resources system in the context of climate change.     

Numerical simulations on the influence of matrix diffusion to carbon sequestration in double porosity fissured aquifers

The double porosity model for fissured rocks, such as limestones and dolomites, has some features that may be relevant for carbon sequestration. Numerical simulations were conducted to study the influence of matrix diffusion on the trapping mechanisms relevant for the long-term fate of CO₂ injected in fissured rocks. The simulations show that, due to molecular diffusion of CO₂ into the rock matrix, dissolution trapping and hydrodynamic trapping are more effective in double porosity aquifers than in an equivalent porous media. Mineral trapping, although assessed indirectly, is also probably more relevant in double porosity aquifers due to the larger contact surface and longer contact time between dissolved CO₂ and rock minerals. However, stratigraphic/structural trapping is less efficient in double porosity media, because at short times CO₂ is stored only in the fissures, requiring large aquifer volumes and increasing the risk associated to the occurrence of imperfections in the cap-rock through which leakage can occur. This increased risk is also a reality when considering storage in aquifers with a regional flow gradient, since the CO₂ free-phase will move faster due to the higher flow velocities in fissured media and discharge zones may be reached sooner.     

Anoxic-aerobic treatment of the liquid fraction of cattle manure

Cattle manure from a dairy farm was treated in order to reduce its pollution potential. The manure came from a farm with 120 cows kept in stables in a free stall barn. As pretreatment, the manure is usually filtered on the farm using a screw press separator with a 0.5 mm mesh. Approximately 70% of the total filtered volume passes through the screen, thus constituting the liquid fraction. This fraction, with a composition of around 64,500 mg COD/l, 5770 mg total-N/l and 800 mg total-P/l, was subjected to centrifugation followed by a two-step biological treatment (anoxic-aerobic) to reduce organic matter (COD), nitrogen and phosphorus compounds. Centrifugation led to the following removal efficiencies: 35% total solids, 60% COD, 75% total phosphorus and 20% total nitrogen (mainly organic nitrogen). With the subsequent anoxic-aerobic treatment, average removal efficiencies of 85% for COD, 90% for total phosphorus and 75% for total nitrogen were achieved.     

Methane generation in tropical landfills: simplified methods and field results

This paper deals with the use of simplified methods to predict methane generation in tropical landfills. Methane recovery data obtained on site as part of a research program being carried out at the Metropolitan Landfill, Salvador, Brazil, is analyzed and used to obtain field methane generation over time. Laboratory data from MSW samples of different ages are presented and discussed; and simplified procedures to estimate the methane generation potential, Lo, and the constant related to the biodegradation rate, k are applied. The first order decay method is used to fit field and laboratory results. It is demonstrated that despite the assumptions and the simplicity of the adopted laboratory procedures, the values Lo and k obtained are very close to those measured in the field, thus making this kind of analysis very attractive for first approach purposes.     

The Effect of Masterbatch Addition on the Mechanical, Thermal, Optical and Surface Properties of Poly(lactic acid)

There has been considerable interest in the use of the biodegradable polymer poly(lactic acid) (PLA) as a replacement for petroleum derived polymers due to ease of processability and its high mechanical strength. Other material properties have however limited its wider application. These include its brittle properties, low impact strength and yellow tint. In an attempt to overcome these drawbacks, PLA was blended with four commercially available additives, commonly known as masterbatches. The effect of the addition of 1.5 wt% of the four masterbatches on the mechanical, thermal, optical and surface properties of the polymer was evaluated. All four masterbatches had a slight negative effect on the tensile strength of PLA (3–5% reduction). There was a four fold increase in impact resistance however with the addition of one of the masterbatches. Differential scanning calorimetry demonstrated that this increase corresponded to a decrease in the polymer crystallinity. However there was an associated increase in polymer haze with the addition of this masterbatch. The clarity of PLA was improved through the addition of an optical brightener masterbatch, but the impact resistance remained low. The glass transition and melting temperatures of PLA were not affected by the addition of the masterbatches, and no change was observed in surface energy. Some delay in PLA degradation, in a PBS degradation medium at 50 °C, was observed due to blending with these masterbatches.     

Seat Belt Use in States and Territories with Primary and Secondary Laws -- United States, 2006

Problem

Motor-vehicle crashes are a leading cause of death in the United States. In the event of a crash, seat belts are highly effective in preventing serious injury and death.

Methods

Data from the 2006 Behavioral Risk Factor Surveillance System were used to calculate prevalence of seat belt use by state and territory and by type of state seat belt law (primary vs. secondary enforcement).

Results

In 2006, seat belt use among adults ranged from 58.3% to 91.9% in the states and territories. Seat belt use was 86.0% in states and territories with primary enforcement laws and 75.9% in states with secondary enforcement laws.

Discussion

Seat belt use continues to increase in the United States. Primary enforcement laws remain a more effective strategy than secondary enforcement laws in getting motor-vehicle occupants to wear their seat belts.