Heavy metal pollution across sites affecting the intestinal helminth communities of the Egyptian lizard, Chalcides ocellatus (Forskal, 1775)

This study aimed to investigate the possible effects of heavy metal pollution across sites and some biological factors on helminth communities infecting the lizard, Chalcides ocellatus. The possibility of heavy metal accumulation by such helminths was also investigated. A total of 202 C. ocellatus were collected from three different sites (industrial, rural, and urban systems) in Ismailia governorate, Egypt, during summer 2009. The lizards were classified according to their sex and size and were examined for the intestinal helminths. Heavy metal levels were detected in the intestinal tissue of the lizards and the recovered helminths. Species richness was 6, 5, and 3 in rural, urban, and industrial systems, respectively. Significant site variations regarding infection prevalence, intensity, and abundance were encountered at different levels. Some noticeable effects of the host size were found. The significant differences found between the metal levels of the intestinal tissues and the recovered helminths and the other relations found in this study may be indications for a possible metals accumulation capacity by helminths. The cestode Oochoristica tuberculata could be a promising biomonitor for Cu and Pb, while the intestinal nematodes were less sensitive to the pollution. Differences in the accumulation capacity may be attributed to the intensity of infection, parasite species, and metal. The observed patterns of distribution and occurrence of helminths and the metals accumulation capacity reflect the need for more studies since this study proposes the model intestinal helminth/C. ocellatus as another promising bioindication system in the terrestrial habitat, especially in areas where the lizard C. ocellatus are available.     

Bio-monitoring for uranium using stream-side terrestrial plants and macrophytes

This study evaluated the abilities of various plant species to act as bio-monitors for environmental uranium (U) contamination. Vegetation and soil samples were collected from a U processing facility. The water-way fed from facility storm and processing effluents was the focal sample site as it represented a primary U transport mechanism. Soils and sediments from areas exposed to contamination possessed U concentrations that averaged 630 mg U kg(-1). Aquatic mosses proved to be exceptional accumulators of U with dry weight (dw) concentrations measuring as high as 12,500 mg U kg(-1) (approximately 1% of the dw mass was attributable to U). The macrophytes (Phragmites communis, Scripus fontinalis and Sagittaria latifolia) were also effective accumulators of U. In general, plant roots possessed higher concentrations of U than associated upper portions of plants. For terrestrial plants, the roots of Impatiens capensis had the highest observed levels of U accumulation (1030 mg kg(-1)), followed by the roots of Cyperus esculentus and Solidago speciosa. The concentration ratio (CR) characterized dry weight (dw) vegetative U levels relative to that in associated dw soil. The plant species that accumulated U at levels in excess of that found in the soil were: P. communis root (CR, 17.4), I. capensis root (CR, 3.1) and S. fontinalis whole plant (CR, 1.4). Seven of the highest ten CR values were found in the roots. Correlations with concentrations of other metals with U were performed, which revealed that U concentrations in the plant were strongly correlated with nickel (Ni) concentrations (correlation: 0.992; r-squared: 0.984). Uranium in plant tissue was also strongly correlated with strontium (Sr) (correlation: 0.948; r-squared: 0.899). Strontium is chemically and physically similar to calcium (Ca) and magnesium (Mg), which were also positively-correlated with U. The correlation with U and these plant nutrient minerals, including iron (Fe), suggests that active uptake mechanisms may influence plant U accumulation.     

A Multiple Criteria Decision Analysis Model Based on ELECTRE TRI-C for Erosion Risk Assessment in Agricultural Areas

This paper deals with a real-world decision-aiding problem for zoning the risk of erosion, total suspended solids emissions, and ecological consequences of their transfers towards the streams. One of these consequences is the decrease of fishes into the streams in agricultural watersheds, because of the clogging of spawning areas. Given the multiple criteria nature of the problem, the originality of our research is to adapt a new decision-aiding sorting method, ELECTRE TRI-C, for identifying risk zones in rural areas, where measures must be taken. The developed model was applied in a small watershed (Low Normandy, France) where the objective was to assess the most appropriate intervention for protecting the reproduction habitat of the salmonid fishes. Agricultural parcels were evaluated on multiple criteria for grouping them into four risk categories, which are related to risk levels as well as priorities on the improvement works. The decision-aiding sorting model is co-constructed, within a constructive approach, through an interaction process between decision-aiding analysts, environmental experts, and local actors for improving transparency and communication on the results. This model is linked with a geographical information system (GIS) for assessing a set of criteria and the visualization of the farming parcels along with their type of intervention they should be submitted to best practices. The assignment results were validated by the environmental experts. These results have a strong impact on the agricultural practices of the farmers into the watersheds. The model proposed in this paper can be considered as a useful decision aid tool in any regions for implementing public agricultural and environmental policies for protecting the ecological areas.     

Migratory crustaceans as biomonitors of metal pollution in their nursery areas. The Lesina lagoon (SE Italy) as a case study

Lichens collected in an unpolluted forest (background) in November 2004, transplanted at 41 sampling sites along the Madina-Tetteh Quarshie road, retrieved in February 2005 and analysed were found to contain higher concentrations of Manganese (Mn), Vanadium (V), lead, Cadmium (Cd), Chromium (Cr) and Nickel (Ni) than in the background area. Observations showed that of all the heavy metals studied, Manganese concentrations were highest at all sampling points with maximum values around a traffic light, an intersection and car fitting/mechanic workshops. Significant correlations were found between Ni and Mn, Mn and Cr and Mn and V. Statistical analysis also revealed a relatively even dispersion of the studied elements on the eastern side of the road than on the western side.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Biofilm thickness measurement using an ultrasound method in a liquid phase

In this report, the development of an online, noninvasive, measurement method of the biofilm thickness in a liquid phase is presented. The method is based in the analysis of the ultrasound wave pulse-echo behavior in a liquid phase reproducing the real reactor conditions. It does not imply the removal of the biomass from the support or any kind of intervention in the support (pipes) to detect and perform the measurements (non-invasiveness). The developed method allows for its sensor to be easily and quickly mounted and unmounted in any location along a pipe or reactor wall. Finally, this method is an important innovation because it allows the thickness measurement of a biofilm, in liquid phase conditions that can be used in monitoring programs, to help in scheduling cleaning actions to remove the unwanted biofilm, in several application areas, namely in potable water supply pipes.     

Assessment of methane emission and oxidation at Air Hitam Landfill site cover soil in wet tropical climate

Methane (CH₄) emissions and oxidation were measured at the Air Hitam sanitary landfill in Malaysia and were modeled using the Intergovernmental Panel on Climate Change waste model to estimate the CH₄ generation rate constant, k. The emissions were measured at several locations using a fabricated static flux chamber. A combination of gas concentrations in soil profiles and surface CH₄ and carbon dioxide (CO₂) emissions at four monitoring locations were used to estimate the CH₄ oxidation capacity. The temporal variations in CH₄ and CO₂ emissions were also investigated in this study. Geospatial means using point kriging and inverse distance weight (IDW), as well as arithmetic and geometric means, were used to estimate total CH₄ emissions. The point kriging, IDW, and arithmetic means were almost identical and were two times higher than the geometric mean. The CH₄ emission geospatial means estimated using the kriging and IDW methods were 30.81 and 30.49 g m^?2 day^?1, respectively. The total CH₄ emissions from the studied area were 53.8 kg day^?1. The mean of the CH₄ oxidation capacity was 27.5 %. The estimated value of k is 0.138 year^?1. Special consideration must be given to the CH₄ oxidation in the wet tropical climate for enhancing CH₄ emission reduction.     

Biodegradation or simple adsorption to the support material? Development of a simple, fast and low-cost technique

Biofilms are present in several areas and are studied in microbiology, medical sciences, biology and, of course, sanitary engineering. Biofilms are used for the treatment of municipal wastewater, and their application was even before the invention of the activated sludge process. The main objective of this work was to develop a simple, fast and low-cost technique to evaluate the nature of the first decay in the concentration of an organic compound in the presence of a solid material. Though simple, the technique developed has allowed the clarification of whether the initial concentration decay is due to adsorption to the support material or a result of biodegradation. The results show that, with two different support materials, adsorption does not take place, and the biodegradation processes are responsible for the first decay in the organic concentration. The technique used offers a fast and low-cost way of studying the existence of adsorption. Two feed concentration solutions and two different support materials were used.     

Arsenic and other trace elements in two catfish species from Paranaguá Estuarine Complex, Paraná, Brazil

Concentrations of arsenic and four additional trace elements (Cu, Cr, Ni, and Zn) were determined by inductively coupled plasma–optical emission spectrometry in the muscular tissue of the yellow catfish (Cathorops spixii) and the urutu catfish (Genidens genidens) from Paranaguá Estuarine Complex, Brazil (PEC). The PEC can be characterized by an environment of high ecological and economic importance in which preserved areas of rainforest and mangroves coexist with urban activities as ports and industries. The average concentrations (in milligram per kilogram dry weight) of elements in the muscle tissue of C. spixii are as follows: Zn (31), As (17), Cu (1.17), Cr (0.62), and Ni (0.28). Similar concentrations could be found in G. genidens with exception of As: Zn (36), As (4.78), Cu (1.14), Cr (0.51), and Ni (0.14). Fish from the geographic northern rural region (Guaraqueçaba–Benito) display higher As concentrations in the muscle tissues than fish found in the south-western (urban) part of the PEC. An international comparison of muscle tissue concentrations of trace elements in fish was made. Except for Ni in C. spixii, a tendency of decrease in element concentration with increasing size (age) of the fish could be observed. According to the National Health Surveillance Agency of Brazil, levels of Cr and As exceeded the permissible limits for seafood. An estimation of the provisional tolerable weekly intake of As was calculated with 109 % for C. spixii and with 29 % for G. genidens.