纳米气敏材料的研究现状与发展

各种气体尤其是可燃性气体和毒性气体的检测监控已成为当前急需解决的问题，纳米气敏材料的研究对提高气敏材料的灵敏度、选择性和长期稳定性，以及如何降低工作温度和缩短响应温度时间等方面起着重大的作用。针对氢气、硫化氢、碳氢化合物、氮氧化合物、乙醇、丙酮等气体的纳米气敏材料的研究现状作了一定的研究，并对发展的趋势作了展望。     

Speciation characterization and coagulation of poly-silica-ferric-chloride：The role of hydrolyzed Fe（Ⅲ） and silica interaction

The highly e cient inorganic polymer flocculants (IPFs) of the ferric-silica system is a new and promising coagulant. Interactions between ferric species and silica play a large part in the coagulation of suspensions. These e ects are quite distinct from those associated with polymeric or colloid silica. However, although these species are key to coagulation e ciency, they have not been comprehensively discussed. A new type of coagulant, poly-silica-ferric-chloride (PFSC), was synthesized by co-polymerization and characterized by time complexation spectroscopy and photon correlation spectroscopy. Compared with traditional ferric salt, the results indicated that PFSC had a higher molecular weight, lesser positive charge, lower Feb and higher Fec. The higher the Si/Fe ratio, the higher the silica and lower the silicac found. The PFSC with appropriate polysilica acid not only obtained better coagulation/flocculation e ciency in turbidity removal, enhanced the flocculation index (FI) and provided less residual ferric, it also lowered water treatment costs compared to traditional ferric salt. Results showed that PFSC could remove colloid particles in water by charge neutralization and sweeping, adsorption bridging mechanism.     

焦化废水处理技术的发展

焦化废水主要来自焦化厂和煤气厂，污染物组成复杂，含有挥发酚、许多难以生物降解的芳香族有机物、多环化合物和氧硫氮等杂环化合物，属较难生化降解的高浓度有机工业废水。因此焦化废水的处理难度大，已引起国内外人士的关注，一直是国内外废水处理领域的一大难题。文章阐述了焦化废水的处理技术发展及其近年来发展的新技术。     

基于LCA的钢铁联合企业CO_2排放影响因素分析

钢铁企业是CO2排放大户,减少吨钢CO2排放是钢铁企业节约能源、保护环境、走可持续发展道路的必然要求.本研究旨在对钢铁企业产品生命周期清单研究的基础上,识别钢铁企业CO2排放的主要影响因素,提出针对性的减排建议.以某钢铁联合企业的产品生命周期清单模型为平台,同时利用TornadoChart工具,计算得到对企业CO2排放影响较大的因素,然后提出了相应的减排措施.结果表明,转炉流程对于钢铁企业的影响要大于电炉流程;对该企业CO2排放有重大影响和相关影响的因素有:高炉煤气(BFG)的CO2排放系数、连铸坯的钢水单耗、热轧的板坯单耗、转炉的铁水比.减少钢铁联合企业CO2排放的有效措施是采取捕集BFG中的CO2、降低转炉的铁水比、加强副产煤气的回收以及优化企业的产品生产结构.     

四川乌头和附子气候生态适宜性研究

本文在分析乌头和附子的生态要求及其主要分布产区的气候环境的基础上,根据模糊集合论(Fuzzy sets)分别建立乌头和附子5个生态气候要素的隶属函数模型,以50个市(县)气象台(站)为代表,综合评价了四川省乌头和附子产地气候条件的生态适宜性;根据综合评判结果,分别将四川划分为3个乌头不同适宜区和4个附子不同适宜区。     

Recyclable Bacterial Cellulose Aerogel for Oil and Water Separation

Journal of Polymers and the Environment - Bacterial cellulose (BC) aerogel has great potential in treating oil spill and organic pollutant. However, its inherent hydrophilicity and poor...     

Diethylenetriaminepentaacetic Acid (DPTA)-modified Magnetic Cellulose Nanocrystals can Efficiently Remove Pb(II) from Aqueous Solution

Journal of Polymers and the Environment - Surface modification of cellulose nanocrystals (CNC) is essential for improving their reactivity and adsorption capacity. Oxidation, as a conventional...     

Effects of long-term nitrogen addition and precipitation changes on CH4 flux in an alpine steppe北大核心CSCD

土壤是甲烷(CH4)重要的源和汇.氮沉降和降水格局变化正在急剧改变土壤碳循环,进而可能对土壤CH4通量造成深刻影响.高寒生态系统是巨大的碳库,对氮沉降和降水变化十分敏感.然而,目前多数研究集中在短期实验上,缺乏对长期氮沉降和降水变化背景下CH4通量的响应及其调控因素的认识.以青藏高原高寒草原为研究对象,在2013年搭建模拟氮沉降和降水格局改变实验平台.基于静态箱–气相色谱法测定2020年生长季(5-10月)土壤CH4通量.结果显示,高寒草原土壤呈CH4的汇.氮添加没有显著改变生长季和植物生长高峰CH4通量.然而,降水变化显著改变了生长季和植物生长高峰CH4通量,其中降水增加(+50%降水)降低了CH4的吸收(分别为–16%和–45%),降水减少(–50%降水)增强了CH4的吸收(分别为+73%和+33%).进一步研究发现,与植物属性和功能基因丰度相比,土壤环境因子主导了CH4通量变化(解释率>90%).其中CH4通量与土壤含水量和温度显著正相关,与土壤pH显著负相关.综上所述,在未来全球变化情景下,降水格局改变更能调节青藏高原高寒草原CH4通量的变化.(图6表1参37)     

Biopolymer-based membranes from polysaccharides for CO2 separation: a review

Environmental Chemistry Letters - The application of natural biopolymers such as polysaccharides for the fabrication of bio-based membranes has recently attracted attention for CO2...     

Antibiotic resistance genes in manure-amended paddy soils across eastern China: Occurrence and influencing factors

• Manure fertilization resulted in antibiotic residues and increased metal contents. • The tet and sul genes were significantly enhanced with manure fertilization. • Soil physicochemical properties contributed to 12% of the variations in ARGs. • Soil metals and antibiotics co-select for ARGs. Pig manure, rich in antibiotics and metals, is widely applied in paddy fields as a soil conditioner, triggering the proliferation of antibiotic resistance genes (ARGs) in soil. However, comprehensive studies on the effects of manure fertilization on the abundance of ARGs and their influencing factors are still insufficient. Here, pig manure and manure-amended and inorganic-amended soils were collected from 11 rice-cropping regions in eastern China, and the accumulation of antibiotics, metals, and ARGs was assessed simultaneously. The results showed that manure fertilization led to antibiotic residues and increased the metal content (i.e., Zn, Cu, Ni, and Cr). Tetracycline and sulfonamide resistance genes (tetM, tetO, sul1, and sul2) were also significantly enhanced with manure fertilization. According to variance partitioning analysis, the most important factors that individually influenced ARGs were soil physicochemical properties, accounting for 12% of the variation. Significant correlations between soil nutrients and ARGs indicated that manure application enhanced the growth of resistant microorganisms by supplying more nutrients. Metals and antibiotics contributed 9% and 5% to the variations in ARGs, respectively. Their co-occurrence also increased the enrichment of ARGs, as their interactions accounted for 2% of the variation in ARGs. Interestingly, Cu was significantly related to most ARGs in the soil (r = 0.26–0.52, p<0.05). Sulfapyridine was significantly related to sul2, and tetracycline resistance genes were positively related to doxycycline. This study highlighted the risks of antibiotic and ARG accumulation with manure fertilization and shed light on the essential influencing factors of ARGs in paddy soils.