Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.     

Exploring the perceived influence of safety management practices on project performance in the construction industry

Although safety management is known to be vital to construction projects, very few studies have solicited views from construction practitioners about their perceptions of which safety management practices (SMPs) are important to construction projects and related to project performance. An empirical study was undertaken in Hong Kong in order to shed more light on this topic. In the study, the importance levels of 15 popular SMPs and five project performance criteria were rated by 232 respondents. An exploratory factor analysis was conducted, and three SMP categories - information, process, and committees - were extracted. Of these three categories, safety management process was perceived by the construction practitioners as being the most important, followed by safety management information and committees. Moreover, the effect of the three SMP categories on a composite project performance variable was tested using hierarchical regression analysis. Results indicate that the “information” and “committees” categories were associated with project performance positively and significantly. One of the major conclusions of the study is that the construction industry has paid relatively less attention to safety management committees, which were empirically analyzed as having a strong perceived impact on project performance. In order to improve project performance, construction companies should promote the criticality of safety management committees.     

Quantitative indicator of homeostatic risk perception in car following

Driving behavior is largely affected by the risk perception of drivers. On the basis of risk homeostasis theory, we regard that drivers may adjust car movement according to the perceived risks fluctuating around a target level. However, the manner by which risk perception is quantified remains unclear. We propose assumptions on the quantitative indicators of risk perception and identify a suitable quantitative indicator of risk perception in car-following process. Three risk indicators are discussed, i.e. time-to-collision (TTC), time headway (TH), and safety margin (SM). Using homeostatic features as bases, we found that SM more suitably quantifies homeostatic risk perception than TTC or TH does. Data collected from video drive recorders installed in taxis operating in Beijing are used to analyze the target risk level of SM (desired SM, or DSM) of professional drivers during the car-following process. The data collected by Ahn et al. (2004) to verify Newell’s model are converted into DSM data to further analyze the target risk level of general drivers. The DSM histogram of professional drivers shows that the standard deviation of the DSM value is 0.115, with a mean value of 0.862 and a total distribution close to the normal distribution. For a general driver, the mean value of DSM is 0.896, which is higher than that of professional drivers. This research may shed lights on the understanding of driving behavior.     

一种验证可变速电梯变速功能安全性的检验方法

在分析可变速电梯原理的基础上,研究了可变速电梯变速功能安全性对其正常运行产生的影响,提出了验证可变速电梯变速功能安全性的检验内容与检验方法。试验采用了普通累积法作为测量数据的处理方法,完成了对称重系统的误差评定。试验证明,该检验方法可以有效地反映可变速电梯变速功能的安全状态。     

纳米氧化镍颗粒对长牡蛎(Crassostreagigas)抗氧化防御体系的影响

纳米氧化镍(nNiO)作为一种广泛使用的纳米颗粒,其水生毒理效应研究还很有限。为探索n Ni O对海洋贝类的毒性机制,本研究将长牡蛎(Crassostrea gigas)置于不同浓度(0、1、10、100 mg·L~(-1))的n Ni O中暴露96 h,分别测定鳃和消化腺组织的丙二醛(MDA)含量和超氧化物歧化酶(SOD)、过氧化物酶(POD)以及过氧化氢酶(CAT)活性,并通过实时荧光定量PCR技术测定了鳃和消化腺中应激蛋白HSP70和AOX基因的表达变化。结果显示:在100 mg·L~(-1)n Ni O处理下,2种组织中MDA含量均显著性升高(P0.01),显示纳米颗粒造成了长牡蛎的脂质过氧化,并可能引起相应的氧化损伤。同时,n Ni O暴露也诱导了长牡蛎抗氧化酶(SOD、CAT和POD)活性的改变。其中,SOD和CAT活性在10 mg·L~(-1)浓度处理组达到最高,而POD活性在1 mg·L~(-1)浓度组即达最高值。在高浓度n Ni O(100 mg·L~(-1))胁迫下,3种抗氧化酶的活性均比低浓度(1和10 mg·L~(-1))处理组降低,表明抗氧化酶的保护作用在较低浓度暴露下更有效;而热激蛋白(hsp70)和交替氧化酶(aox)基因却分别在长牡蛎消化腺和鳃组织中上调表达(P0.01),并表现出一定的组织差异。说明高浓度纳米颗粒暴露中主要是应激蛋白发挥了作用。本文结果为纳米氧化镍对海洋双壳贝类的毒性机制研究及生态风险评估提供了基础数据。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Interactive effects of single,binary and trinary trace metals (lead,zinc and copper) on the physiological responses of Kandelia obovata seedlings

Environmental Geochemistry and Health - Heavy metals are considered important environmental contaminants, and their mixture toxicity on plants has complex mutual interactions. The interactive...     

Could biochar amendment be a tool to improve soil availability and plant uptake of phosphorus? A meta-analysis of published experiments

Environmental Science and Pollution Research - As one of the most important nutrients for plant growth, phosphorus was often poorly available in soil. While biochar addition induced improvement of...     

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH₄⁺ from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH₄⁺ reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g^?1 even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.     

榆林市某园区兰炭企业存在问题及解决对策

兰炭是榆林市的重要产业之一,但由于兰炭"粗放"的生产方式,对区域环境产生一定影响。为推进兰炭绿色健康发展,本文针对榆林市某园区内兰炭企业进行调研,了解该企业存在的主要问题,并提出相关建议。