Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.

     

Mesoporous WO3-graphene photocatalyst for photocatalytic degradation of Methylene Blue dye under visible light illumination

Advanced oxidation technologies are a friendly environmental approach for the remediation of industrial wastewaters. Here, one pot synthesis of mesoporous WO_3 and WO_3-graphene oxide(GO) nanocomposites has been performed through the sol–gel method. Then, platinum(Pt) nanoparticles were deposited onto the WO_3 and WO_3-GO nanocomposite through photochemical reduction to produce mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites. X-ray diffraction(XRD) findings exhibit a formation of monoclinic and triclinic WO_3 phases. Transmission Electron Microscope(TEM) images of Pt/WO_3-GO nanocomposites exhibited that WO_3 nanoparticles are obviously agglomerated and the particle sizes of Pt and WO_3 are ~ 10 nm and 20–50 nm, respectively. The mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites were assessed for photocatalytic degradation of Methylene Blue(MB) as a probe molecule under visible light illumination.The findings showed that mesoporous Pt/WO_3, WO_3-GO and Pt/WO_3-GO nanocomposites exhibited much higher photocatalytic efficiencies than the pure WO_3. The photodegradation rates by mesoporous Pt/WO_3-GO nanocomposites are 3, 2 and 1.15 times greater than those by mesoporous WO_3, WO_3-GO, and Pt/WO_3, respectively. The key factors of the enhanced photocatalytic performance of Pt/WO_3-GO nanocomposites could be explained by the highly freedom electron transfer through the synergetic effect between WO_3 and GO sheets, in addition to the Pt nanoparticles that act as active sites for O2 reduction, which suppresses the electron hole pair recombination in the Pt/WO_3-GO nanocomposites.     

东海表层沉积物中多环芳烃的分布特征及来源解析

本研究对东海沉积物中多环芳烃(PAHs)组成及含量进行了分析,发现多环芳烃总浓度为8.2~180.2 ng/g,和国内外其它区域相比,整体处于一个低至中等程度的污染水平。东海沉积物中PAHs的分布整体表现为中间低、两端高的格局。内陆架是长江入海物质的主要沉积区,也是PAHs的主要汇集区;陆架北部区域的物质来源复杂,但总体受长江入海泥沙的控制,自西向东PAHs含量梯度递减;研究区域的东北部,较高的PAHs可能源于济州岛的输入;冲绳海槽也含有较高PAHs;而残留沉积区中PAHs含量极低。通过多环芳烃组成特征判断,东海表层沉积物中PAHs主要来自煤、木材、油类的燃烧,还有部分来自油类的泄漏。同时不同区域Ba P/Be P、Ba A/Chry比值的差别表明内陆架及冲绳海槽的PAHs主要来自河流输送,残留沉积区的PAHs可能主要来自大气沉降。     

A view from the countryside

Guest Editorial

A view from the countryside     

Diapause embryos in the neustonic copepodAnomalocera patersoni

The neustonic copepodAnomalocera patersoni Templeton, collected from the Gulf of Naples from January to May 1988, laid subitaneous and diapause eggs that were of equal size and dark and smooth in appearance. In January and February, most eggs were subitaneous and hatched within 2 to 3 d at room temperature. Conspicuous numbers of diapause eggs were first obtained in February when several clutches contained a second egg type which did not hatch in a subitaneous manner. By March and April, most clutches contained only diapause eggs. Transmission electron microscope studies of subitaneous and diapause eggs revealed striking morphological differences. Subitaneous eggs had a thin vitelline coat covering the plasma membrane, whereas diapause eggs were enveloped by a complex four-layer structure which is assembled after spawning and which probably serves as a protective shell during dormancy. No major morphological differences were discernible in the oogenic cycle of females spawning either of the two egg types. Diapause eggs were shown to be embryos in early stages of development, and segmentation of these embryos was arrested for the entire 6-mo period of investigation. Diapause eggs hatched after 7 mo of dormancy.