壳聚糖及其衍生物处理重金属废水的研究

壳聚糖是无毒、易于生物降解的天然高分子有机物,壳聚糖及其衍生物是良好的水处理药剂,目前在重金属废水处理中也得到广泛的应用,因此对壳聚糖改性产物的研究也成为热点。文章从羧甲基壳聚糖、交联壳聚糖、壳聚糖季铵盐、多孔壳聚糖微球和含硫壳聚糖衍生物5种壳聚糖改性产物的制备及其去除重金属性能,概述了壳聚糖的研究现状及其衍生物在重金属废水处理中的发展前景及应用,并对壳聚糖及其衍生物在水处理中的研究进行展望。     

氮添加对生长季寒温带针叶林土壤有效氮和酸化的影响

基于低剂量、多形态的N添加控制实验,以大兴安岭寒温带针叶林为研究对象,通过长期持续的原位增N处理,测定了2010年、2012年和2013年生长季初期(5月)和生长旺季(8月)0~10 cm土壤有效氮(NH+4-N和NO-3-N)含量以及土壤p H值.结果表明,生长季初期和生长旺季土壤有效氮均以NH+4-N为主,NO-3-N含量较低,其中NH+4-N含量占无机氮含量的96%以上.随着增N时间的延长,同生长旺季相比,增N对生长季初期0~10 cm土壤NH+4-N影响较为明显,且主要受施N类型影响.与此相反,生长旺季0~10 cm土壤NO-3-N含量高于生长季初期.N输入对生长季初期和生长旺季土壤NO-3-N影响较为明显,且低N处理更倾向于促进0~10 cm土壤NO-3-N的富集.随着时间的延长,土壤NH+4-N和NO-3-N对增N的响应都由前期的不显著向后期的显著转变.增N对生长季初期和生长旺季0~10 cm土壤p H值影响显著,其中低N处理的土壤和生长旺季阶段土壤p H值相对较低.随着增N时间的延长,土壤p H值对增N的响应也由前期的不显著向后期的显著转变.长期持续的增N处理已经使大兴安岭寒温带针叶林0~10 cm土壤产生了明显的酸化.     

硫磺回收装置腐蚀原因及防护措施

针对国内硫磺回收装置实际生产中存在的设备腐蚀问题,根据不同的腐蚀机理进行了腐蚀分类,分析了腐蚀原因并提出了具体的防护措施.     

骆马湖泥-水界面磷铁硫原位同步变化特征

利用薄膜梯度扩散（DGT）原位采样装置获取了骆马湖全湖8个典型湖区泥-水界面（SWI）活性磷（P）、铁（Fe）、硫（S）垂向分布信息，据此定量估算三者交换通量.结果表明，骆马湖沉积物剖面P、Fe、S浓度范围分别为0~2.05，0~11.10和0.01~0.63mg/L，并在微小尺度呈高度空间异质性.在水平方向上活性P、Fe主要表现为西北湖区高于东南湖区，而活性S则未表现出明显的分布规律；就垂直剖面而言，活性P、Fe、S自界面向下呈升高趋势，并在60mm深度内出现峰值，且活性P和Fe剖面呈明显的同步变化特征；活性P、Fe在多数点位具有显著的正相关性（r>0.65，P<0.01），且各采样点沉积物中的总铁与总磷比值[w（∑Fe）/w（∑P）]均高于15，这表明Fe的地球化学循环过程对于骆马湖内源磷释放起重要控制作用；8个采样点样品中活性P、Fe、S交换通量分别为0.066~0.698，1.671~5.592和0.007~0.071mg/（m²·d），表明P、Fe、S由沉积物向水体释放.西北湖区表现出较高的P通量和活性P浓度，这可能会增加南水北调过程中水质污染的风险，应予以重视.以上结果支持了P、Fe耦合释放机制，明确了骆马湖SWI的活性P、Fe、S迁移特征.     

Coalbed methane produced water in China: status and environmental issues

As one of the unconventional natural gas family members, coalbed methane (CBM) receives great attention throughout the world. The major associated problem of CBM production is the management of produced water. In the USA, Canada, and Australia, much research has been done on the effects and management of coalbed methane produced water (CMPW). However, in China, the environmental effects of CMPW were overlooked. The quantity and the quality of CMPW both vary enormously between coal basins or stratigraphic units in China. The unit produced water volume of CBM wells in China ranges from 10 to 271,280 L/well/day, and the concentration of total dissolved solids (TDS) ranges from 691 to 93,898 mg/L. Most pH values of CMPW are more than 7.0, showing the alkaline feature, and the Na-HCO₃ and Na-HCO₃-Cl are typical types of CMPW in China. Treatment and utilization of CMPW in China lag far behind the USA and Australia, and CMPW is mainly managed by surface impoundments and evaporation. Currently, the core environmental issues associated with CMPW in China are that the potential environmental problems of CMPW have not been given enough attention, and relevant regulations as well as environmental impact assessment (EIA) guidelines for CMPW are still lacking. Other potential issues in China includes (1) water quality monitoring issues for CMPW with special components in special areas, (2) groundwater level decline issues associated with the dewatering process, and (3) potential environmental issues of groundwater pollution associated with hydraulic fracturing.     

Identification of main influencing factors of life cycle CO2 emissions from the integrated steelworks using sensitivity analysis

The amount of CO₂ emissions from steelworks accounts for a great share of the total CO₂ emissions from industry in China. Thus, reducing CO₂ emissions from steelworks is urgent for China's environmental protection and sustainable development. This study aims at identifying factors that influence CO₂ emissions from steelworks and proposing measures to reduce CO₂ emissions. The life cycle inventory (LCI) of iron and steel products implies the relationship between the CO₂ emissions of the steelworks and the input variables of the LCI. The Tornado Chart Tool is utilized to calculate the variation of CO₂ emissions caused by the change of each input variables of LCI. Then, mean sensitivity of each input variable is calculated and the ranking criterion developed is used to identify the main factors influencing the integrated steelworks. Subsequently, measures for reducing CO₂ emissions are proposed. The results indicate that the very important influencing factors of CO₂ emissions in steelworks are the CO₂ emission factor of Blast Furnace Gas (BFG), liquid steel unit consumption of continuous casting, continuous casting slab unit consumption of hot rolling and hot metal ratio of steel making. Consequently, many efficient measures for reducing CO₂ emissions have been proposed, such as removing CO₂ contained in BFG, decreasing the hot metal ratio of Basic Oxygen Furnace (BOF), recycling BFG, optimizing the products' structure, etc.     

喀斯特水库碳、硅耦合循环:以红枫湖、普定水库和平寨水库为例

通过研究红枫湖、普定水库和平寨水库三个喀斯特水库的碳、硅循环,探讨了水库碳-硅循环的耦合关系。藻类光合作用导致表层水体溶解硅(DSi)及溶解无机碳(DIC)的亏损;当DSi供应不足时,硅藻生长繁殖大量消耗DSi,导致DSi相对DIC快速亏损。沉降颗粒物中内源有机碳含量越高,生物硅(BSi)及有机碳(OC)含量越高,但OC/BSi受控于硅藻对沉积物有机碳贡献率,且与之呈反比。生物硅与有机碳含量之比K值(K=BSi/OC)可作为硅藻贡献率的潜在替代指标,并与之呈正相关;生物硅与内源有机碳(OC_(auto))含量之比K_(auto)值(K_(auto)=BSi/OC_(auto))可作为水体富营养化程度的潜在替代指标,并与富营养化程度呈负相关。     

Future private car stock in China: current growth pattern and effects of car sales restriction

Mitigation and Adaptation Strategies for Global Change - Car stock projection is essential to evaluating the energy and environmental impacts of private cars in China. Since the private car...     

循环经济发展能值评价及实证研究

定量评价循环经济的发展水平是循环经济的一个基础理论课题,本文在辽宁省1996-2005的统计数据基础上,运用能值分析方法,从能值流量、能值经济、投入产出、环境压力和综合指数5个方面评价了辽宁省循环经济发展状况。研究结果表明,从总能值用量和能值密度的变化趋势来看,辽宁省经济发展水平较高,很大程度上依赖于不可更新的能源消耗。能值自给率和能值投资率的变化趋势说明,辽宁省自然资源相对丰富,经济发展的资源基础相对雄厚,经济的安全性较高,但对本地资源的依赖程度高,资源利用效率低,仍是一种高资源消耗型、粗放型的经济发展模式。因此,辽宁省循环经济发展的重点是不可更新资源的合理利用,目标是降低废弃物排放,加强资源的循环利用。     

应对二氧化碳浓度上升问题的研究:CO_2的捕获、储存与利用

为了缓解日益严重的CO2浓度升高导致的温室效应等环境问题,针对各国CO2过量排放与温室效应逐渐加剧的现状,讨论传统CO2减排方法与CO2的捕获、储存与利用(CCSU)的优缺点和优势互补,论述针对大型CO2排放点的减排措施——CCSU的必要性。对CCSU进行系统的介绍和认识,并对CCSU所包含的各种捕获技术、储存技术以及利用技术的特点进行对比和分析,论述其适用范围、地域和经济因素。结合国外一些现有的应用CO2的先进技术和经验,对CO2的捕获与利用的联用作出分析和展望。尤其是CO2的化工利用具有广阔的研发和发展前景,CO2EOR(CO2提高采收率技术)在技术和经济上具有实际应用意义。为新型环保型能源体系的建设提供参考。