Inhalation of concentrated ambient particulate matter near a heavily trafficked road stimulates antigen-induced airway responses in mice

The goal of this study was to test the following hypotheses: (1) exposure to mobile emissions from mobile sources close to a heavily trafficked roadway will exacerbate airway inflammation and allergic airway responses in a sensitized mouse model, and (2) the magnitude of allergic airway disease responses will decrease with increasing distance from the roadway. A particle concentrator and a mobile exposure facility were used to expose ovalbumin (OVA)-sensitized BALB/c mice to purified air and concentrated fine and concentrated ultrafine ambient particles at 50 m and 150 m downwind from a roadway that was heavily impacted by emissions from heavy duty diesel-powered vehicles. After exposure, we assessed interleukin (IL)-5, IL-13, OVA-specific immunoglobulin E, OVA-specific immunoglobulin G1, and eosinophil influx as biomarkers of allergic responses and numbers of polymorphonuclear leukocytes as a marker of inflammation. The study was performed over a two-year period, and there were differences in the concentrations and compositions of ambient particulate matter across those years that could have influenced our results. However, averaged over the two-year period, exposure to concentrated ambient particles (CAPs) increased the biomarkers associated with airway allergies (IL-5, immunoglobulin E, immunoglobulin G1 and eosinophils). In addition, mice exposed to CAPs 50 m downwind of the roadway had, on the average, greater allergic responses and showed greater indications of inflammation than did mice exposed to CAPs 150 m downwind. This study is consistent with the hypothesis that exposure to CAPs close to a heavily trafficked roadway influenced allergic airway responses.     

Cycling of metals in desert soils: effects of Tamarix nilotica and inundation by lake water

Concentrations of Ca, Mg, K, Na, Cu, Zn, Al, Fe and Mn were measured in soils and in Tamarix nilotica from Wadi Allaqi on the shore of Lake Nasser in the Eastern Desert of Egypt. All of the elements were concentrated in the leaves of Tamarix relative to the stems and roots. Leaf:soil concentration ratios, used as an indicator of metal accumulation in the plant, showed high enrichment factors for Na (67.5), K (63.0) and Mg (35.0); of the trace elements measured, Zn had the highest enrichment factor (7.64). Comparison with other desert species suggested that Tamarix was exceptional only in the accumulation of sodium. Periodic inundation of the soil by Lake Nasser caused dilution and dispersion of the accumulated salts.     

The influence of suspension density and temperature on the filtration rate of Hiatella arctica

The rate of filtering Phaeodactylum tricornutum and Isochrysis galbana was measured in Hiatella arctica (L.) by the indirect suspension depletion method monitored by optical density measurement. The filtration rate of H. arctica was found to be 1.412×10^–2 l/h/g wet weight at a temperature of 15°C when fed with P. tricornutum, at average cell concentrations up to 3.5×10⁶ cells/ml. The filtration rate dropped almost to zero when the concentration of P. tricornutum reached 11×10⁶ cells/ml. The filtration rate of I. galbana diminished at a much lower cell concentration of 1×10⁶ cells/ml, and almost ceased at 3 to 4×10⁶ cells/ml. In mixed cultures of I. galbana and P. tricornutum, the filtration rate ratio was 0.37 to 1.00, and this was believed to be due to a proportion of the smaller former cells passing through the ostia. However, when resuspended in sea water, I. galbana cells were taken at a rate slightly less than P. tricornutum. The medium in which the I. galbana cells had been grown was inhibitory to the filtering activity of H. arctica, since, when cells of either alga were resuspended in the medium, the filtration rate was considerably reduced. No inhibitory factor existed in either of the original nutrient media. Hence, the importance of using low cell concentrations and of eliminating any inhibitory metabolic products when measuring filtration rates of bivalves is stressed. H. arctica shows a typical activity temperature eurve for a boreo-arctic species, with a steady rise from 0°C to a maximum between 15° and 17°C, and a sharp fall in activity to about zero at 25°C. The rates of filtration of various species at temperatures approaching the optimum were compared after allowance was made for fall in filtration rate with increasing body weight. The results suggested that the Mytilacea had the highest filtration rates and that H. arctica possesses one of the lowest filtration rates recorded.     

A new index for assessing the contribution of energy efficiency in LEED 2009 certified green buildings to achieving UN sustainable development goals in Jordan

Jordan faces stringent energy challenges mainly in the form of import dependence and escalating demand. The building sector accounts for 58% of total national electricity consumption and therefore plays an important role in addressing these challenges. This article investigates how energy efficiency in green buildings certified by the Leadership in Energy and Environmental Design (LEED) rating system contribute towards achieving United Nations (UN) Sustainable Development Goals (SDGs) in Jordan. Furthermore, this paper proposes a new Comprehensive Contribution to Sustainable Development Index (CCSDI) to assess the contributions of implementation of the LEED 2009 prerequisites and credits in the Energy and Atmosphere (EA) category to achieve UN SDGs in Jordan. Questionnaire surveys were conducted to obtain data. Relative Importance Index (RII) method was used to evaluate the contributions of LEED 2009 prerequisites and credits in the EA category. Results indicate a positive relationship between the LEED 2009 prerequisites and credits in category and UN SDGs 7?9 and 12?13. We conclude that our proposed CCSDI is a robust tool for assessing the contribution of energy efficiency in LEED 2009 certified green buildings towards achieving UN SDGs in Jordan.     

Hazardous wastes,adverse impacts,and management strategies: a way forward to environmental sustainability

Environment, Development and Sustainability - There has been great concern about producing, converting, or disposing of the waste obtained from different sources. Waste production is a continuous...     

Investigation of the Thermosensitive Nanosphere Polymer in Removing Organophosphorus Pesticides from Water and Its Isotherm Study (Case Study: Diazinon)

In this research, a novel thermosensitive nanosphere polymer (TNP) was synthesized by copolymerization of N-isopropylacrylamide with 3-allyloxy-1,2-propanediol for the removal of diazinon from water. The characterization of the synthesized adsorbent has been performed by Fourier transform infrared spectrometer, scanning electron microscopy and elemental analysis. Batch adsorption method was performed to investigate the influences of various parameters like pH, temperature and contact time on the adsorption of diazinon. The equilibrium adsorption data of diazinon by TNP was studied by Langmuir, Freundlich, Temkin and Redlich–Peterson model. According to equilibrium adsorption results, the Langmuir, Freundlich and Temkin constants were evaluated to be 0.912 (L/mg), 7.916 (mg/g) (L/mg)^1/n and 2.494 respectively at pH 7 and room temperature. Based on Redlich–Peterson model analysis, the equilibrium data for the adsorption of diazinon was conformed well to the Langmuir isotherm model. This method was successfully applied for removal of diazinon from environmental samples. Moreover, in reusing of TNP, the sorption capacity was maintained without any significant change after 10 cycles of sorption–desorption process.     

Government management and overexploitation of groundwater resources: absence of local community initiatives in Ardabil plain-Iran

Although mismanagement of groundwater resources has resulted in their destruction over centuries, climate change is speeding up this process more than ever. On the one hand, urgent action by government bodies is needed to address the challenge. On the other hand, a vast body of literature proves that bottom-up collective action, although requiring a longer time period, is a better solution to manage such resources. This research aims to address this dilemma. The groundwater resource in Ardabil plain in Iran, which has long been managed solely through government intervention, has been chosen as a case study to explore the opportunities and limitations of managing a critically endangered area from a common pool resource perspective. Our study suggests that managing Ardabil groundwater resources should be conducted on two scales. The bottom-up institutional agreements should take place at village scale while the government should stay in charge of the overall organization at plain scale.     

Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry

Warm-mix asphalt (WMA) has been gaining popularity in the asphalt industry primarily because of its ability to lower the energy required to blend asphalt mixes, which in turn results in less fuel consumption, slower aging of the asphalt binder and reduced emission of greenhouse gases. This paper evaluates the effects of different quantities of a WMA additive known as Sasobit^® on the required heat energy and the amount of CO₂ produced to increase the temperature of two aggregates from three sources and one binder from 25 °C to the point of mixing. The results showed that incorporating 1% Sasobit^® can potentially reduce the required heat energy and amount of CO₂ produced by 2.8% and 3.0%, respectively, for all aggregate types and sources investigated. The paper also presented design charts that enable energy policy makers and engineers to select the appropriate Sasobit^® content to produce the most cost effective asphalt mixture with less environmental impact. The design charts show that 1.6% Sasobit^® content is the most suitable proportion to be blended into the asphalt binder without compromising pavement resistance against fatigue failure. Two similar aggregates from different sources may exhibit similar specific gravities, but their specific heat capacities can vary widely. These differences have a significant effect on the required heat energy, asphalt production cost and the amount of emissions released into the environment.     

Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method

The alkaline conditions for extraction of natural dye from Henna leaves were optimized and the resulting extract was used to further optimize its dyeing conditions on cotton by exhaust method. Dyeings without any mordant were compared with those obtained with premordanting and postmordanting with alum and iron. It was found that dyeings produced with alkaline extracts of Henna leaves have better colour strength than the dye extracts obtained in distilled water. Furthermore, dyeings with alkaline extracts have moderate to good fastness properties and that mordanting did not result in any significant improvement in fastness properties. Finally, in comparative studies between synthetic and this natural dye, it was inferred that natural dye has good potential to act as co-partner with synthetic dye.     

Investigation of thermal treatment on selective separation of post consumer plastics prior to froth flotation

Plastics have become the widely used materials because of their advantages, such as cheapness, endurance, lightness, and hygiene. However, they cause waste and soil pollution and they do not easily decompose. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. Depending on their surface characteristics, these plastics can be separated from each other by flotation method which is useful mineral processing technique with its low cost and simplicity.The main objective of this study is to investigate the flotation characteristics of PET and PVC and determine the effect of plasticizer reagents on efficient plastic separation. For that purpose, various parameters such as pH, plasticizer concentration, plasticizer type, conditioning temperature and thermal conditioning were investigated. As a result, PET particles were floated with 95.1% purity and 65.3% efficiency while PVC particles were obtained with 98.1% purity and 65.3% efficiency.