The feasibility of decontamination of reduced saline sediments from copper using the electrokinetic process

The remediation of metal contamination in estuarine and reduced sediments is another challenge for the electrokinetic process. Problems result from the complex chemical composition of saline reduced sediments. In the experiments described here copper was added into saline reduced sediments to simulate the natural situation. Two constant voltages were applied across the electrokinetic cell to investigate the effect of an increase in potential difference on the electrokinetic process. Acetic acid at pH 6 and 4 was also added to the cathode in separate experiments to enhance copper removal. The results from this study showed that in the unenhanced experiments most of copper remained in the soil and was unaffected by the electrokinetic process. At the end of unenhanced electrokinetic experiments, the copper concentration was found only to be slightly changed in the anode region. Up to 21% of the copper was found precipitated near the anode when the applied voltage was 10V and this increased to 25% when the applied voltage was 7V. In the enhanced electrokinetic experiments up to 98% of copper was removed from section 1 and precipitated again in sections 2 and 3. This indicates that a significant amount copper removal from the saline sediments may be achieved by the enhanced electrokinetic process.     

A detailed kinetic investigation on the effects of hydrogen enrichment on the performance of gas-fueled SI engine

This study investigates the effects of hydrogen enrichment on formation of pollutants and greenhouse gases in gas-fueled spark ignition engines. To this end, a previously validated detailed mechanism is embedded with a comprehensive one-dimensional engine model and the results are verified with experimental observations at different compression ratios and engine loads. The simulations are then performed for different mixtures of hydrogen and natural gas. The results indicate that adding hydrogen increases the cylinder peak pressure at different loads and compression ratios, despite the fact that reduces the amount of carbon monoxide, carbon dioxide, and methane in all the conditions.     

Assessment of radiological hazard of NORM in Margalla Hills limestone, Pakistan

Studies on naturally occurring radioactive material (NORM) in the limestone from the Margalla Hills have been carried out by measuring gamma activity and to access its radiological implications if any. For data acquisition, a High-Purity Germanium detector was employed. The activity concentrations of (226)Ra, (232)Th, and (40)K were found to be 14.32?±?0.24, 2.05?±?0.04, and 13.80?±?0.20 Bq kg(-1), respectively. These values are relatively lower as compared to that in the limestone of other countries and much lower than the values reported for the natural building stones. The average specific activities due to (226)Ra were found to be higher when compared with (40)K and (232)Th. Indices of radium equivalent activity (Ra(eq)), internal hazard (H(in)), indoor absorbed gamma dose rate (D(R,)), and corresponding annual effective dose (E(eff)) were also determined for the limestone-made rooms. All of these indices were found to be in the lower ranges. The Margalla Hills limestone does not pose any excessive radiological health hazard as a building material and in industrial uses for a common man.     

Trace metals accumulation in soil irrigated with polluted water and assessment of human health risk from vegetable consumption in Bangladesh

Trace metals accumulation in soil irrigated with polluted water and human health risk from vegetable consumption was assessed based on the data available in the literature on metals pollution of water, soil, sediment and vegetables from the cites of Bangladesh. The quantitative data on metal concentrations, their contamination levels and their pollution sources have not been systematically gathered and studied so far. The data on metal concentrations, sources, contamination levels, sample collection and analytical tools used were collected, compared and discussed. The USEPA-recommended method for health risk assessment was used to estimate human risk from vegetable consumption. Concentrations of metals in water were highly variable, and the mean concentrations of Cd, Cr, Cu and As in water were found to be higher than the FAO irrigation water quality standard. In most cases, mean concentrations of metals in soil were higher than the Bangladesh background value. Based on geoaccumulation index (I _geo) values, soils of Dhaka city are considered as highly contaminated. The I _geo shows Cd, As, Cu, Ni, Pb and Cr contamination of agricultural soils and sediments of the cities all over the Bangladesh. Polluted water irrigation and agrochemicals are identified as dominant sources of metals in agricultural soils. Vegetable contamination by metals poses both non-carcinogenic and carcinogenic risks to the public. Based on the results of the pollution and health risk assessments, Cd, As, Cr, Cu, Pb and Ni are identified as the priority control metals and the Dhaka city is recommended as the priority control city. This study provides quantitative evidence demonstrating the critical need for strengthened wastewater discharge regulations in order to protect residents from heavy metal discharges into the environment.     

Vehicle pollution toxicity induced changes in physiology,defence system and biochemical characteristics of Calotropis procera L.

The present study aims to examine the physiological, biochemical and defence system responses of Calotropis procera to vehicle exhaust pollution. We selected various sample sites along two major roads in the Punjab province of Pakistan, i.e. Faisalabad to Sargodha road (FSR) and Pindi Bhattian to Lillah motorway (M-2). Traffic density at all sites and plant responses (i.e. chlorophyll a, chlorophyll b, total chlorophyll and carotenoid contents, transpiration rate, stomatal conductance, photosynthetic rate, sub-stomatal CO₂ concentration, water use efficiency, total free amino acids, total soluble proteins and total antioxidant activity) were measured. Levels of carbon (C) and nitrogen (N) and four metals of most possible concern – i.e. lead (Pb), zinc (Zn), cadmium (Cd) and nickel (Ni) – were also examined in all samples. We found their considerable deposition in all the samples along roads. Inhibitory effects of roadside pollutants were noted for photosynthetic pigments, stomatal conductance, transpiration rate, photosynthetic rate and total soluble proteins, whereas stimulatory effects were noted for sub-stomatal CO₂ concentration, free amino acids and total antioxidant activity. The stimulation of antioxidant enzymes activity revealed stress and mitigation of reactive oxygen species. The present study clearly signifies that C. procera has great potential to endure the stress caused by roadside pollutants.     

Environmental impact of coal mining and coal seam gas production on surface water quality in the Sydney basin,Australia

The extraction of coal and coal seam gas (CSG) will generate produced water that, if not adequately treated, will pollute surface and groundwater systems. In Australia, the discharge of produced water from coal mining and related activities is regulated by the state environment agency through a pollution licence. This licence sets the discharge limits for a range of analytes to protect the environment into which the produced water is discharged. This study reports on the impact of produced water from coal mine activities located within or discharging into high conservation environments, such as National Parks, in the outer region of Sydney, Australia. The water samples upstream and downstream from the discharge points from six mines were taken, and 110 parameters were tested. The results were assessed against a water quality index (WQI) which accounts for pH, turbidity, dissolved oxygen, biochemical oxygen demand, total dissolved solids, total phosphorus, nitrate nitrogen and E .coli. The water quality assessment based on the trace metal contents against various national maximum admissible concentration (MAC) and their corresponding environmental impacts was also included in the study which also established a base value of water quality for further study. The study revealed that impacted water downstream of the mine discharge points contained higher metal content than the upstream reference locations. In many cases, the downstream water was above the Australia and New Zealand Environment Conservation Council and international water quality guidelines for freshwater stream. The major outliers to the guidelines were aluminium (Al), iron (Fe), manganese (Mn), nickel (Ni) and zinc (Zn). The WQI of surface water at and downstream of the discharge point was lower when compared to upstream or reference conditions in the majority of cases. Toxicology indices of metals present in industrial discharges were used as an additional tool to assess water quality, and the newly proposed environmental water quality index (EWQI) lead to better trend in the impact of coal and coal seam gas mining activities on surface water quality when compared to the upstream reference water samples. Metal content limits were based on the impact points assigned by the Agency for Toxic Substances and Disease Registry, USA. For environmental and health impact assessment, the approach used in this study can be applied as a model to provide a basis to assess the anthropogenic contribution from the industrial and mining activities on the environment.