Persulfate mediated solar photo-Fenton aiming at wastewater treatment plant effluent improvement at neutral PH: emerging contaminant removal,disinfection, and elimination of antibiotic-resistant bacteria

Environmental Science and Pollution Research - This work investigated an innovative alternative to improve municipal wastewater treatment plant effluent (MWWTP effluent) quality aiming at the...     

Applications of chitosan to the roots and shoots change the accumulation pattern of cadmium in Talinum patens (Talinaceae) cuttings

Environmental Science and Pollution Research - Chitosan induces tolerance to abiotic stress agents in plants. However, studies on the different application forms of this biopolymer are limited....     

Ethanol emission from loose corn silage and exposed silage particles

Silage on dairy farms has been identified as a major source of volatile organic compound (VOC) emissions. However, rates of VOC emission from silage are not accurately known. In this work, we measured ethanol (a dominant silage VOC) emission from loose corn silage and exposed corn silage particles using wind tunnel systems. Flux of ethanol was highest immediately after exposing loose silage samples to moving air (as high as 220 g m^?2 h^?1) and declined by as much as 76-fold over 12 h as ethanol was depleted from samples. Emission rate and cumulative 12 h emission increased with temperature, silage permeability, exposed surface area, and air velocity over silage samples. These responses suggest that VOC emission from silage on farms is sensitive to climate and management practices. Ethanol emission rates from loose silage were generally higher than previous estimates of total VOC emission rates from silage and mixed feed. For 15 cm deep loose samples, mean cumulative emission was as high as 170 g m^?2 (80% of initial ethanol mass) after 12 h of exposure to an air velocity of 5 m s^?1. Emission rates measured with an emission isolation flux chamber were lower than rates measured in a wind tunnel and in an open setting. Results show that the US EPA emission isolation flux chamber method is not appropriate for estimating VOC emission rates from silage in the field.     

Ketoprofen Loaded in Natural Rubber Latex Transdermal Patch for Tendinitis Treatment

Ketoprofen is an analgesic with potent anti-inflammatory activity against acute inflammation, subacute inflammation, for the acute and long-term treatment of various inflammatory pathologies, as rheumatoid arthritis and colonic adenocarcinoma. In order to minimize the incidence of systemic events related to ketoprofen, the transdermal drug delivery system development has been most important. The advantages of using natural rubber latex membranes include not only the reduction of adverse systemic events, but also the suitability of the low cost of the material together with its physicochemical properties such as flexibility, mechanical stability, surface porosity and water vapor permeability, and besides being a biocompatible material also presents biological activity to stimulate the angiogenesis, being able to be used in tissue repair. This study demonstrated that ketoprofen was successfully incorporated into natural latex membranes for drug delivery. FTIR indicated that the drug did not interact chemically with the membrane. Moreover, the natural latex membranes released 60% of the ketoprofen incorporated in 50 h. SEM images indicated that a portion of the drug was present on the membrane surface, being this portion responsible for the burst release. The tensile tests showed that the addition of the drug into the natural latex membrane did not influence on the polymer mechanical behavior. In addition, drug-natural latex membranes presented no red blood cell damaging effects. Our data shows that the ketoprofen loaded natural latex membranes is a promising system for sustained drug delivery which can be used to minimize the adverse side effects of high dose systemic drug delivery.     

The genetic mating system of a sea spider with male-biased sexual size dimorphism: evidence for paternity skew despite random mating success

Male-biased size dimorphism is usually expected to evolve in taxa with intense male–male competition for mates, and it is hence associated with high variances in male mating success. Most species of pycnogonid sea spiders exhibit female-biased size dimorphism, and are notable among arthropods for having exclusive male parental care of embryos. Relatively little, however, is known about their natural history, breeding ecology, and mating systems. Here we first show that Ammothella biunguiculata, a small intertidal sea spider, exhibits male-biased size dimorphism. Moreover, we combine genetic parentage analysis with quantitative measures of sexual selection to show that male body size does not appear to be under directional selection. Simulations of random mating revealed that mate acquisition in this species is largely driven by chance factors, although actual paternity success is likely non-randomly distributed. Finally, the opportunity for sexual selection (I _s), an indirect metric for the potential strength of sexual selection, in A. biunguiculata males was less than half of that estimated in a sea spider with female-biased size dimorphism, suggesting the direction of size dimorphism may not be a reliable predictor of the intensity of sexual selection in this group. We highlight the suitability of pycnogonids as model systems for addressing questions relating parental investment and sexual selection, as well as the current lack of basic information on their natural history and breeding ecology.     

Effects of nozzle types and 2,4-D formulations on spray deposition

The objective of this study was to evaluate the effects of nozzle types and 2,4-D formulations on spray deposition on different targets. Two field experiments were carried out in a completely randomized design, and treatments were arranged in a factorial scheme. Species in experiment 1 were Sumatran fleabane (Conyza sumatrensis) and Brazil pusley (Richardia brasiliensis) and in experiment 2 were soybeans (Glycine max) and Benghal dayflower (Commelina benghalensis). For both experiments, the first factor corresponded to spray nozzles with different settings (AD 110.015 – 61 and 105 L ha^?1; AD 015-D – 75 and 146 L ha^?1; XR 110.0202 – 200 L ha^?1; and ADIA-D 110.02 – 208 L ha^?1) and the second factor consisted of two formulations of 2,4-D (amine and choline). The formulation of 2,4-D choline has contained Colex-D? Technology. Similar or higher spray deposition was observed on the leaves and artificial targets when using 2,4-D choline as compared to the 2,4-D amine formulation, and these differences in deposition were more evident for nozzles applying lower spray volumes. Deposition was more affected by nozzle type when amine formulation was used, compared to choline formulation.     

Design of aquifer remediation systems: (2) estimating site-specific performance and benefits of partial source removal

A Lagrangian stochastic model is proposed as a tool that can be utilized in forecasting remedial performance and estimating the benefits (in terms of flux and mass reduction) derived from a source zone remedial effort. The stochastic functional relationships that describe the hydraulic "structure" and non-aqueous phase liquid (NAPL) "architecture" have been described in a companion paper (Enfield, C.G., Wood, A.L., Espinoza, F.P., Brooks, M.C., Annable, M., Rao, P.S.C., this issue. Design of aquifer remediation systems: (1) describing hydraulic structure and NAPL architecture using tracers. J. Contam. Hydrol.). The previously defined functions were used along with the properties of the remedial fluids to describe remedial performance. There are two objectives for this paper. First, is to show that a simple analytic element model can be used to give a reasonable estimate of system performance. This is accomplished by comparing forecast performance to observed performance. The second objective is to display the model output in terms of change in mass flux and mass removal as a function of pore volumes of remedial fluid injected. The modelling results suggest that short term benefits are obtained and related to mass reduction at the sites where the model was tested.     

Eutrophication trends in forest soils in Galicia (NW Spain) caused by the atmospheric deposition of nitrogen compounds

We calculated the sensitivity of Galician forest soils to eutrophication caused by atmospheric deposition of nitrogen compounds, using the Simple Mass Balance (SMB) method as described by [Posch, M., de Vries, W., Hettelingh, J.-P., 1995. Critical loads of sulphur and nitrogen. In: Posch, M., de Smet, P.A.M., Hettelingh, J.-P., Downing, R.J. Calculation and Mapping of Critical Thresholds in Europe. Status Report 1995, Coordination Center for Effects, National Institute for Public Health and the Environment, Bilthoven, The Netherlands, pp. 31-42]. Deposition values were used to calculate critical loads exceedance. Galician natural forest ecosystems can support nitrogen deposition loads of more than 10 kg Nha (-1) yr (-1). The lowest critical loads (approximately 10 kg Nha (-1) yr (-1)) mainly occurred in forest stands in the interior zone, while highest critical load values (approximately 68 kg Nha (-1) yr (-1)) were observed in eucalyptus stands at low altitudes in the littoral area. Exceedances based on N deposition levels, calculated from data recorded in 2001, occurred in 40% of the forest soils, showing the need to control N emissions in these areas to prevent possible eutrophication of soils and waters. Analysis of rainfall bulk composition revealed that ammonium, probably derived from agricultural and cattle activities, was the main compound responsible for N deposition in Galicia.     

Treatment of effluent from re‐refined lubricating oils by combined processes of coagulation,flocculation, and Fenton process

This work examines the possibility and the potential application of physicochemical processes (coagulation and flocculation) and advanced oxidative processes (Fenton Process) in the treatment of effluents from the re‐refining of used lubricating oils.