Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

Enhancing soil aggregation and acetamiprid adsorption by ecofriendly polysaccharides hydrogel based on Ca2+- amphiphilic sodium alginate

Soil aggregation plays an important role in agricultural production activities. However, the structure of soil aggregation is destroyed by the natural environment and unreasonable farming management, resulting in the loss of water, fertilizers and pesticides in soil. At present, hydrogels have been widely reported to promote the formation of soil aggregation. In this paper, amphiphilic calcium alginate (ASA/Ca²⁺) was applied to promote the formation of soil aggregation and enhance pesticide retention. Initially, an ASA was obtained through the one-pot Ugi condensation (a four-component green chemical reaction). Then, ASA/Ca²⁺ hydrogel is prepared by Ca²⁺ cross-linking. The formation of soil aggregation was determined through the Turbiscan Lab Expert stability analyzer, Confocal Laser Scanning Microscope (CLSM), and Transmission Electron Microscope (TEM). And the effect of soil aggregation on acetamiprid environmental behavior was investigated by adsorption kinetics, adsorption isotherms, and leaching. The results shown that the three-dimensional network structure of ASA/Ca²⁺ hydrogel can promote the formation of soil aggregation. Aggregate durability index (ADI) was 0.55 in the presence of ASA/Ca²⁺ hydrogel, indicating that amphiphilic hydrogel can enhance the stability of soil aggregation. The adsorbing capacity of acetamiprid was 1.58 times higher than pure soil, and the release of acetamiprid only about 20% in the presence of ASA/Ca²⁺ hydrogel. These results would be helpful for the formation of soil aggregation and pesticides adsorption on soil aggregation. Thus, ASA/Ca²⁺ hydrogel is likely to improve soil quality, simultaneously it can minimize the mobility of pesticides in the agricultural system.     

基于ANSYS的界面化核电站取水构筑物配筋程序开发

在实际工程应用中,对于结构复杂安全等级高的核电水工结构,相关的通用设计软件尚未形成。利用ANSYS二次开发工具APDL、UIDL以及Tcl/Tk可视化工具命令语言,针对核电站取水构筑物开发了一整套程序,包括了建模、计算以及后处理,后处理部分为内力计算和配筋可视化程序,简化了操作流程。算例表明,内力提取程序运算结果精度良好,可以用于配筋设计,利用配筋可视化程序对工程实例进行的配筋及裂缝验算,结果符合工程要求,针对配筋结果提出了墙体优化设计的建议。通过在ANSYS中实现内力计算和可视化配筋程序,可用于解决核电水工结构设计问题,有良好的工程适用性。     

海藻酸钠/锆@钙水凝胶的制备及其对磷的吸附研究

利用简便的方法制备了一种新型的海藻酸钠/锆@钙(SA/Zr@Ca)水凝胶材料,采用SEM、XRD对该材料进行了表征,并通过拟合吸附等温模型及吸附动力学模型,结合XPS和Zeta电位分析,研究了该材料对磷酸盐吸附的性能和机理.结果表明,该材料为非晶态的无定型材料.在溶液初始pH为2～7时,SA/Zr@Ca对磷酸盐(以PO...     

Royal jelly inhibited N-acetylation and metabolism of 2-aminofluorene in human liver tumor cells (J5)

The present study was carried out to evaluate the question of whether or not royal jelly affects N-acetylation and metabolism of 2-aminofluorene (2-AF) in the human liver tumor cell line (J 5). N-acetylation and metabolism of 2-AF in intact J5 cells was determined by using high performance liquid chromatography for the amounts of acetylated and nonacetylated 2-AF and profile of 2-AF metabolism. The results indicated that royal jelly displayed a dose-dependent inhibition of N-acetylation of 2-AF in J5 cells. Royal jelly also decreased the profile of 2-AF metabolites in J5 cells. This report is the first demonstration which showed that royal jelly affects N-acetylation of 2-AF in human liver tumor cells (J5).     

有机硅助剂Breakthru S240对大型溞的毒性研究

参照OECD推荐的化学品对水生生物的标准试验方法,测定了有机硅助剂Breakthru S240对大型溞Daphnia magna的急性、慢性毒性和胚胎毒性,以期综合评价有机硅助剂对大型溞的毒性效应.结果表明:有机硅助剂对大型溞的48h-LC50值为1.218mg/L,为中毒.21d慢性毒性结果显示,有机硅助剂对大型溞的产溞量、产溞胎数、21d体长和蜕皮次数都有显著的影响,且随着处理浓度的增大而更加明显.母溞暴露Breakthru S240后,对F1(1st)代的生长和繁殖没有显著影响,但F1(3rd)代的恢复比F1(1st)代差,虽然Breakthru S240对F1(3rd)代生长影响不大,但对其繁殖有显著影响.这可能与母溞的暴露时间有关.另外,高浓度有机硅助剂对大型溞胚胎发育也存在一定的威胁,孵化抑制率高达68.50%.     

日本农村循环经济系统磷代谢分析——以北海道中札内村为例

在介绍日本农村循环经济模式特征的基础上,采用物质流分析方法,选取日本典型农村循环经济模式进行磷代谢分析。结果表明,大量的堆肥和直接还田改善了畜禽排泄物和农村生活对水体环境的影响,但对于减少种植业引起的磷排放未起到关键作用。建议在建设新农村的同时,有必要考虑农村生活-种植业-畜牧业一体化循环经济模式,扩大农村生活废弃物的再资源化量,以减少对系统外环境的污染。     

北京市西三环地区大气颗粒物中多环芳烃的分布特性

于2012年3—12月在北京市西三环地区按粒径分6级采集大气颗粒物样品,采用气相色谱-质谱(GC-MS)对颗粒物样品中16种优控PAHs(多环芳烃)进行分析. 结果表明:颗粒物中ρ(∑₁₆PAHs)(PAHs的总质量浓度)季节变化显著,表现为冬季>春季>秋季>夏季,并且与ρ(PM)(PM为颗粒物)呈良好线性相关;不同粒径颗粒物中ρ(PAHs)呈向小粒子富集的趋势,PM_2.1中ρ(PAHs)约占ρ_sum(∑₁₆PAHs)〔6级颗粒物中ρ(∑₁₆PAHs)总和〕的64%~87%;除夏季3环PAHs占优势外,其他季节均以4~ 5环PAHs占优势;同时,随着粒径的减小,PAHs有向高环数富集的趋势. 运用主成分分析和多元线性回归法进行源解析发现,机动车尾气排放和燃煤是本地区大气颗粒物中PAHs的主要来源;不同粒径颗粒物中的PAHs来源有差异,2.1~10.2μm粒径段颗粒物中PAHs主要来源于机动车尾气排放,贡献率为63.0%;而1.3~2.1μm和<1.3μm的颗粒物中PAHs均主要来源于燃煤,贡献率分别为56.8%和58.7%.      

温度对烃类物质爆炸极限的影响及其预测模型研究

为研究温度对烃类气体爆炸极限的影响,利用爆炸极限测试仪对C1-C4烃类气体在20℃、60℃、100℃、140℃等初始温度条件下的爆炸极限进行了测试。结果表明:C1-C4烃类气体的爆炸下限在20-140℃范围内与温度呈线性关系,同一系列烃类物质,随着碳原子数的增加,同一温度下所对应的爆炸下限数值依次降低;对于相同碳原子数的烃类物质,相同温度下烷烃的爆炸下限数值高于烯烃的爆炸下限数值。此外,建立了高温条件下烃类物质爆炸极限的预测模型,为烃类物质爆炸极限的预测提供了一种方法。