Consequence analysis by means of characteristic curves to determine the damage to buildings from bursting spherical vessels

Since the damage suffered by buildings as a consequence of explosions usually affect the people inside them, it is important to take it into account when performing consequence analysis. The aim of this paper is to provide a methodology to estimate consequences to buildings from pressure waves produced by spherical vessel burst. This is done by combining characteristic overpressure–impulse–distance curves [González Ferradás, E., Diaz Alonso, F., Sanchez Perez, J.F., Miñana Aznar, A., Ruiz Gimeno, J. and Martinez Alonso, J., 2006, Characteristic overpressure–impulse–distance curves for vessel burst, Process Safety Progress, 25(3): 250–254] with PROBIT equations. The main advantage of this methodology is that it allows an overview of all the magnitudes involved, as damage is shown in the same graph as the overpressure, impulse and distance. In this paper diagrams and equations are presented to determine minor damage to buildings (broken windows, displacement of doors and window frames, tile displacement, etc.), major structural damage (cracks in walls, collapse of some walls) and collapse (the damage is so extensive that the building is partially or totally demolished).     

Critical analysis of the waste management performance of two uranium production units in Brazil--part II: Caetite production center

This paper discusses the environmental waste management of the Heap-Leach Uranium Production Facility of Caetité located in a semi-arid region in Brazil. A comparison is made with the first uranium production site of the country located in Poços de Caldas. It is demonstrated that differences in the operational process along with different environmental conditions can lead to different impacts. In the present case groundwater is the potential most sensitive environmental medium despite the well-established consensus in the literature that radon and aerosol emissions may turn-out to be the most relevant environmental aspects of an installation located at this type of region. Most of the ²²⁶Ra content in the ore remains in the leached ore that is deposited with the waste rock. A lack in appropriate prediction of the hydrological balance has been causing unanticipated emissions of liquid effluents into the environment. Chemical treatment of this effluent may be needed. Contamination of groundwater in the short term by the waste ponds is not to be expected but it can be a relevant issue in the long term. As a consequence, careful closure schemes will need to be put in place. Finally, the overall costs with remediation in the Caetité production center are lower than those observed at the Poços de Caldas mining site.     

Influence of resorcinol chemical oxidation on the removal of resulting organic carbon by activated carbon adsorption

Activated carbon adsorption and chemical oxidation followed by activated carbon adsorption of resorcinol in water has been studied. Three chemical oxidants have been used: hypochlorite, permanganate and Fenton's reagent. The influence of concentrations of resorcinol and activated carbon on adsorption removal rates has been investigated. Both isotherm and adsorption kinetics have been studied. Results are fit well by Freundlich isotherms and adsorption rates of resorcinol were found to follow a pseudo-second-order kinetic model. However, pyrogallol, an intermediate of resorcinol oxidation with permanganate and Fenton's reagent, showed an unfavourable isotherm type. At the conditions investigated, chemical oxidation allows slight reductions of TOC and intermediates formed were found to inhibit the adsorption rate of TOC in the case of permanganate and Fenton's reagent oxidation, likely due to formation of some polymer pyrogallol product. The adsorption process was found to be controlled by pore internal diffusion, which justifies the poor affinity of oxidation intermediates toward activated carbon since molecules of larger size should diffuse rapidly for the adsorption to be effective.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives

The study of the ceramic characteristics of sludge ashes, alone or mixed with additives (kaolin, montmorillonite, illitic clay, powdered flat glass) includes characterization of additives, preparation of probes (dry or wet mixed), thermal treatment (up to 1200 degrees C, except melting or deformation) and control (densities, compressive strengths and water absorption). Thermal treatment increases the density and compressive strength of probes (both parameters go through maxima, with later decreases) and decreases the absorption of water. The densification is also revealed by the evolution of the ratio of decrease of volume/loss of mass. The maximum values of compressive strengths were obtained for 25% of illitic clay, montmorillonite and glass powder. Densification concerning probes with sludge ashes alone does not occur with kaolin. Experimental data were adjusted to exponential relationships between compressive strengths and densities for every composition, and also to a general equation for all probes. The apparent density obtained was adjusted to a non-linear dependence with temperature, leading to a maximum in density and permitting calculating the temperature of occurrence of this maximum. The adjustment was not possible for probes containing kaolin, requiring presumably higher temperatures to densify. Water absorption has low values for ashes or kaolin probes, intermediate values for illite and powdered flat glass probes and high values for montmorillonite probes. Excepting with kaolin, ceramic materials with better characteristics than sludge ashes without additives were obtained at lower treatment temperatures.     

Assessment of the pollution impact on biomarkers of effect of a freshwater fish

Changes in biomarkers of fish captured from stressed environments may represent a reliable tool in revealing sublethal effects of the pollutants found in aquatic ecosystems. The response patterns of selected biochemical and morphological variables biomarkers of effect were assessed in adult females of an indigenous teleost Cnesterodon decemmaculatus, caught at a polluted site (San Francisco) of the Reconquista river (Buenos Aires, Argentina). Combined field-caging experiments with controlled laboratory exposure to clean media were performed. The biochemical parameters measured were specific activities of gill (Na+ + K+)-ATPase, liver AlaAT and AspAT, and brain AChE; LSI and CF were also calculated. The changes in gill (Na+ + K+)-ATPase and liver AlaAT activities of fish captured in the field in most cases were reversible after transfer to clean media. The results were interpreted in association with the physicochemical profile of the water samples taken simultaneously with the capture of the fish. Results suggested the suitability of the test species used as tools in environmental monitoring programs of risk assessment.     

Development, validation and application of a method to analyze phenols in water samples by solid phase micro extraction-gas chromatography-flame ionization detector

In this work the development, validation and application of method using Solid Phase Microexctration (SPME) for the analyses of five pollutants (phenol, 2-nitrophenol, 2,4-dimethylphenol, 2,4-dichlorophenol and 4-chloro, 3-methyl phenol) in supplying water, using gas chromatography (GC) with flame ionization detector (FID) is described. The optimal conditions obtained for SPME were: fiber type: Poliacrylate (PA); extraction time: 40 minutes; extraction temperature: 70 degrees C; amount of salt added to sample (NaCl): 15%; desorption temperature: 8 minutes. The parameters studied in the method validation were: limit of detection (0.3 and 3.5 microg.L(- 1)); precision, measured by the variation coefficient (between 2.1 and 8.8%); calibration curve and linearity, by using the external standardization method (between 1 and 50 50 microg.L(- 1)). After the methodology development, samples of water collected in Atibaia River (S?o Paulo - Brazil) were analyzed, using the optimized methodology. Three water samples collected in the rain season showed a peak with retention time close to 4-chloro, 3 methyl phenol further analyzed by Gas Chromatography-Mass Spectrometry for the identity confirmation. In spite of the fact that none target compounds were found in the river water samples analyzed, the presence of two phenols different from those investigated (p-terc butyl phenol; butylated hydroxytoluene) were detected. These results together with the results of the limit of detection (that showed to be lower than the maximum concentration of phenols demanded by different environment control agencies), and the results of the validation, indicate the applicability of this method for the analysis of selected phenols in river water samples.     

Virological Characterization of Roof-Harvested Rainwater of Densely Urbanized Low-Income Region

Food and Environmental Virology - Roof-harvested rainwater (RHRW) is considered relatively clean water, even though the possible presence of pathogens in the water may pose human health risks. In...     

Assessment of aquatic plants in the reservoirs of AES-tietê and development of an integrated control model for the most important species

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tietê as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promiss?o, and Nova-Avanhandava, located in the Tietê River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Gua?u reservoir, which belongs to the Mogi-Gua?u River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move coating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.     

Characteristic overpressure–impulse–distance curves for the detonation of explosives, pyrotechnics or unstable substances

A number of models have been proposed to calculate overpressure and impulse from accidental industrial explosions. When the blast is produced by explosives, pyrotechnics or unstable substances, the TNT equivalent model is widely used. From the curves given by this model, data are fitted to obtain equations showing the relationship between overpressure, impulse and distance. These equations, referred to here as characteristic curves, can be fitted by means of power equations, which depend on the TNT equivalent mass. Characteristic curves allow determination of overpressure and impulse at each distance.