Long-term effects of lead poisoning on bone mineralization in vultures exposed to ammunition sources

Long-lived species are particularly susceptible to bioaccumulation of lead in bone tissues. In this paper we gain insights into the sublethal effects of lead contamination on Egyptian vultures (Neophron percnopterus). Our approach was done on the comparison of two populations (Canary Islands and Iberian Peninsula) differing in exposures to the ingestion of lead ammunition. Blood lead levels were higher in the island population (Canary Islands range: 5.10-1780 μg L⁻¹n = 137; Iberian Peninsula range: 5.60-217.30 μg L⁻¹n = 32) showing clear seasonal trends, peaking during the hunting season. Moreover, males were more susceptible to lead accumulation than females. Bone lead concentration increased with age, reflecting a bioaccumulation effect. The bone composition was significatively altered by this contaminant: the mineralization degree decreased as lead concentration levels increased. These results demonstrate the existence of long-term effects of lead poisoning, which may be of importance in the declines of threatened populations of long-lived species exposed to this contaminant.     

Oxidative stress is an early symptom triggered by aluminum in Al-sensitive potato plantlets

The objective of this study was to evaluate whether the oxidative stress caused by aluminum (Al) toxicity is an early symptom that can trigger root growth inhibition in Macaca (Al-sensitive) and SMIC148-A (Al-tolerant) potato clones. Plantlets were grown in a nutrient solution (pH 4.00) with 0, 100 and 200 mg Al L⁻¹. At 24, 72, 120 and 168 h after Al addition, root length and biochemical parameters were determined. Regardless of exposure time, root length of the Macaca clone was significantly lower at 200 mg Al L⁻¹. For the SMIC148-A clone, root length did not decrease with any Al treatments. Al supply caused lipid peroxidation only in Macaca, in both roots (at 24, 72, 120 and 168 h) and shoot (at 120 and 168 h). In roots of the Macaca, catalase (CAT) and ascorbate peroxidase (APX) activity decreased at 72 and 120 h, and at 24, 72 and 120 h, respectively. At 168 h, both activities increased upon addition of Al. In roots of the SMIC148-A, CAT activity increased at 72 and 168 h, whereas APX activity decreased at 72 h and increased at 24, 12 and 168 h. The Macaca showed lower root non-protein thiol group (NPSH) concentration at 200 mg Al L⁻¹ in all evaluations, but the SMIC148-A either did not demonstrate any alterations at 24 and 72 h or presented higher levels at 120 h. This pattern was also observed in root ascorbic acid (AsA) concentration at 24 and 120 h. The cellular redox status of these potato clones seems to be affected by Al. Therefore, oxidative stress may be an important mechanism for Al toxicity, mainly in the Al-sensitive Macaca clone.     

Sneak in or repel your enemy: Dufour's gland repellent as a strategy for successful usurpation in the slave-maker Polyergus rufescens

Summary. The dulotic queen ant, Polyergus rufescens, must first penetrate a host colony and kill the resident queen in order to successfully founding a new colony. Successful usurpation by a newly mated queen predictably depends on a dual strategy. Although, it can sneak in by being “chemically insignificant” with respect to cuticular hydrocarbons, it may also need to deter prospective host-worker aggressors. Chemical analysis of Dufour's gland secretion of P. rufescens queens and workers by GS/MS revealed that queen secretion is typified by esters of butanoic acid and acetic acid, of which decyl butanoate comprises over 80%. Butanoates and acetates are also present in the workers' secretion, but these are of higher molecular weight, and octadecyl butanoate represents the major compound. Using synthetic mixtures of queen and worker Dufour's gland, we tested the hypothesis that these secretions modify the aggressive behavior of the host species Formica cunicularia>. The queen-like synthetic mixture significantly reduced aggression of the host workers towards alien conspecifics, but neither pentane nor the worker-like synthetic mixture showed this effect. Although Dufour's gland content of >Polyergus queens was suggested to function as an appeasement pheromone (Topoff et al. 1988; Mori et al. 2000), we hypothesized that it may in fact act as a repellent. In order to test this hypothesis we exposed starved F. cunicularia workers to a droplet of honey on a glass slide applied with one of the following compounds: decyl butanoate (queen major compound), octadecyl butanoate (worker main compound), limonene (a reported ant repellent), and pentane (solvent control). Of these, the workers were repelled only by the decyl butanoate and did not approach the honey. We conclude that during usurpation the queen actively repels aggressive workers by emitting Dufour's gland repellent, comprising the alternative tactic in the usurpation dual strategy. This represents another chemical weapon in the diverse arsenal used by parasites to overcome the host's resistance. Received 7 April 2000; accepted 17 May 2000     

Consequence analysis by means of characteristic curves to determine the damage to buildings from bursting spherical vessels

Since the damage suffered by buildings as a consequence of explosions usually affect the people inside them, it is important to take it into account when performing consequence analysis. The aim of this paper is to provide a methodology to estimate consequences to buildings from pressure waves produced by spherical vessel burst. This is done by combining characteristic overpressure–impulse–distance curves [González Ferradás, E., Diaz Alonso, F., Sanchez Perez, J.F., Miñana Aznar, A., Ruiz Gimeno, J. and Martinez Alonso, J., 2006, Characteristic overpressure–impulse–distance curves for vessel burst, Process Safety Progress, 25(3): 250–254] with PROBIT equations. The main advantage of this methodology is that it allows an overview of all the magnitudes involved, as damage is shown in the same graph as the overpressure, impulse and distance. In this paper diagrams and equations are presented to determine minor damage to buildings (broken windows, displacement of doors and window frames, tile displacement, etc.), major structural damage (cracks in walls, collapse of some walls) and collapse (the damage is so extensive that the building is partially or totally demolished).     

Critical analysis of the waste management performance of two uranium production units in Brazil--part II: Caetite production center

This paper discusses the environmental waste management of the Heap-Leach Uranium Production Facility of Caetité located in a semi-arid region in Brazil. A comparison is made with the first uranium production site of the country located in Poços de Caldas. It is demonstrated that differences in the operational process along with different environmental conditions can lead to different impacts. In the present case groundwater is the potential most sensitive environmental medium despite the well-established consensus in the literature that radon and aerosol emissions may turn-out to be the most relevant environmental aspects of an installation located at this type of region. Most of the ²²⁶Ra content in the ore remains in the leached ore that is deposited with the waste rock. A lack in appropriate prediction of the hydrological balance has been causing unanticipated emissions of liquid effluents into the environment. Chemical treatment of this effluent may be needed. Contamination of groundwater in the short term by the waste ponds is not to be expected but it can be a relevant issue in the long term. As a consequence, careful closure schemes will need to be put in place. Finally, the overall costs with remediation in the Caetité production center are lower than those observed at the Poços de Caldas mining site.     

Influence of resorcinol chemical oxidation on the removal of resulting organic carbon by activated carbon adsorption

Activated carbon adsorption and chemical oxidation followed by activated carbon adsorption of resorcinol in water has been studied. Three chemical oxidants have been used: hypochlorite, permanganate and Fenton's reagent. The influence of concentrations of resorcinol and activated carbon on adsorption removal rates has been investigated. Both isotherm and adsorption kinetics have been studied. Results are fit well by Freundlich isotherms and adsorption rates of resorcinol were found to follow a pseudo-second-order kinetic model. However, pyrogallol, an intermediate of resorcinol oxidation with permanganate and Fenton's reagent, showed an unfavourable isotherm type. At the conditions investigated, chemical oxidation allows slight reductions of TOC and intermediates formed were found to inhibit the adsorption rate of TOC in the case of permanganate and Fenton's reagent oxidation, likely due to formation of some polymer pyrogallol product. The adsorption process was found to be controlled by pore internal diffusion, which justifies the poor affinity of oxidation intermediates toward activated carbon since molecules of larger size should diffuse rapidly for the adsorption to be effective.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives

The study of the ceramic characteristics of sludge ashes, alone or mixed with additives (kaolin, montmorillonite, illitic clay, powdered flat glass) includes characterization of additives, preparation of probes (dry or wet mixed), thermal treatment (up to 1200 degrees C, except melting or deformation) and control (densities, compressive strengths and water absorption). Thermal treatment increases the density and compressive strength of probes (both parameters go through maxima, with later decreases) and decreases the absorption of water. The densification is also revealed by the evolution of the ratio of decrease of volume/loss of mass. The maximum values of compressive strengths were obtained for 25% of illitic clay, montmorillonite and glass powder. Densification concerning probes with sludge ashes alone does not occur with kaolin. Experimental data were adjusted to exponential relationships between compressive strengths and densities for every composition, and also to a general equation for all probes. The apparent density obtained was adjusted to a non-linear dependence with temperature, leading to a maximum in density and permitting calculating the temperature of occurrence of this maximum. The adjustment was not possible for probes containing kaolin, requiring presumably higher temperatures to densify. Water absorption has low values for ashes or kaolin probes, intermediate values for illite and powdered flat glass probes and high values for montmorillonite probes. Excepting with kaolin, ceramic materials with better characteristics than sludge ashes without additives were obtained at lower treatment temperatures.     

Assessment of the pollution impact on biomarkers of effect of a freshwater fish

Changes in biomarkers of fish captured from stressed environments may represent a reliable tool in revealing sublethal effects of the pollutants found in aquatic ecosystems. The response patterns of selected biochemical and morphological variables biomarkers of effect were assessed in adult females of an indigenous teleost Cnesterodon decemmaculatus, caught at a polluted site (San Francisco) of the Reconquista river (Buenos Aires, Argentina). Combined field-caging experiments with controlled laboratory exposure to clean media were performed. The biochemical parameters measured were specific activities of gill (Na+ + K+)-ATPase, liver AlaAT and AspAT, and brain AChE; LSI and CF were also calculated. The changes in gill (Na+ + K+)-ATPase and liver AlaAT activities of fish captured in the field in most cases were reversible after transfer to clean media. The results were interpreted in association with the physicochemical profile of the water samples taken simultaneously with the capture of the fish. Results suggested the suitability of the test species used as tools in environmental monitoring programs of risk assessment.     

Development, validation and application of a method to analyze phenols in water samples by solid phase micro extraction-gas chromatography-flame ionization detector

In this work the development, validation and application of method using Solid Phase Microexctration (SPME) for the analyses of five pollutants (phenol, 2-nitrophenol, 2,4-dimethylphenol, 2,4-dichlorophenol and 4-chloro, 3-methyl phenol) in supplying water, using gas chromatography (GC) with flame ionization detector (FID) is described. The optimal conditions obtained for SPME were: fiber type: Poliacrylate (PA); extraction time: 40 minutes; extraction temperature: 70 degrees C; amount of salt added to sample (NaCl): 15%; desorption temperature: 8 minutes. The parameters studied in the method validation were: limit of detection (0.3 and 3.5 microg.L(- 1)); precision, measured by the variation coefficient (between 2.1 and 8.8%); calibration curve and linearity, by using the external standardization method (between 1 and 50 50 microg.L(- 1)). After the methodology development, samples of water collected in Atibaia River (S?o Paulo - Brazil) were analyzed, using the optimized methodology. Three water samples collected in the rain season showed a peak with retention time close to 4-chloro, 3 methyl phenol further analyzed by Gas Chromatography-Mass Spectrometry for the identity confirmation. In spite of the fact that none target compounds were found in the river water samples analyzed, the presence of two phenols different from those investigated (p-terc butyl phenol; butylated hydroxytoluene) were detected. These results together with the results of the limit of detection (that showed to be lower than the maximum concentration of phenols demanded by different environment control agencies), and the results of the validation, indicate the applicability of this method for the analysis of selected phenols in river water samples.