The use of silver as a selective precipitant for I in radioactive waste management

¹²⁹I is one of the more hazardous nuclides occurring in radioactive waste. In the form of I⁻, its most likely speciation, it is poorly sorbed on most geologic media. Several workers have suggested the use of silver to precipitate I⁻ as the insoluble AgI, in a cemented waste form, or as a “getter”. The efficacy of this procedure is examined by experiment, in conjunction with thermodynamic predictions.The addition of AgNO₃ to Portland cement leads to coprecipitation with C-S-H, with low Ag solubilities ( 10 μmg/L); 2–;3 orders of magnitude lower than predicted (from Ag₂O). AgI is stable in these matrices, with low aqueous I concentrations (<2 mg/L). In 85% BFS-15% OPC pastes, AgI is unstable due to redox and complexation reactions, with much I⁻ passing into solution; concentrations up to 900 mg/L were observed. It is shown that repository conditions, on closure, are also likely to induce solubilisation of I⁻ from AgI. It is concluded that the use of Ag is unlikely to significantly improve the immobilisation properties of the near field for radioiodine.     

Proactive environmental management is the key to full compliance

There are two key elements to achieving full and complete regulatory compliance: cost-efficient management of current regulatory requirements under existing environmental law and the capability to anticipate and analyze the impact of future regulations on the facility. The author provides step-by-step advice on how to develop a program to accomplish a corporate goal of zero violations.     

Prediction of thermal hazards from fireballs

Various models of fireball diameter have been evaluated by statistical techniques. The model of Gayle for fireball diameter estimation showed good agreement between the predicted and experimental data. The models relating to fireball duration, transmissivity and view factor have been selected based on their relative merits. A user interactive computer program has been developed to predict thermal hazards from fireballs in chemical process industries.     

Productive utilization of pig farm wastes: a case study for developing countries

This paper presents a case study on pig farm waste management in which pig manure is stabilized in two-stage anaerobic reactors (to produce methane), while pig farm wastewater is treated in water hyacinth ponds from which the harvested water hyacinth plants are used in the production of silage (animal feed) or compost fertilizer. The results suggest the technical feasibility of applying these technologies to treat and recycle pig farm wastes. Cost/benefit analysis reveals the option to produce methane gas and silage to be financially viable after 15 years of operation. A management concept of waste recycling programs is presented, including relationships among objectives, constraints and implementation plan. Decision on a waste recycling program should not be based only on cost/benefit analysis, but also on the pollution control and public health improvement to be gained.     

Recommended Methods for the Disposal of Sanitary Wastes from Temporary Field Medical Facilities

Emergency field medical facilities constructed after a disaster are frequently managed by medical staff even though many of the day-to-day problems of hospital management are unrelated to medicine. In this paper we discuss the short-term management of one of these problems, namely the control and disposal of sanitary wastes. It is aimed at persons in the medical profession who may find themselves responsible for a temporary hospital and have little or no previous experience of managing such situations. The wastes commonly generated are excreta, sullage and refuse. In addition, surface water must also be considered because its inadequate disposal is a potential health hazard. The paper concentrates on short-term measures appropriate for the first six months of the hospital or clinic's existence. Facilities expected to last longer are recommended to install conventional waste management systems appropriate to the local community and conditions. In most situations, wastes should be disposed of underground either by burial (for solids) or infiltration (for liquids). The design, construction and management of appropriate disposal systems are described.     

VARIABILITY IN MEASURED BEDLO AD-TRANSPORT RATES1

ABSTRACT: Variability in bedload-transport rates during constant water discharge is an inherent part of the bedload-transport process. Although this variability has been measured extensively in the laboratory, similar information generally is not available from field measurements. During a four-day period of nearly constant water discharge, four sets of consecutively collected bedload samples, ranging from 43 to 120 samples, were obtained at the same cross channel location using a standard 65-pound Helley-Smith bedload sampler. When the measured transport rates are converted to dimensionless rates and plotted as cumulative frequency distributions, they show good agreement with a theoretical probability distribution function of rates derived for the case of ripples on dunes. The distributions show that during constant water discharge individual measured rates at a fixed point vary from near zero to four times the mean rate, and 60 percent of the sampled rates will be less than the mean. Because of the large variation in transport rates that occurs at every location in the cross section, many observations are required to establish an accurate estimate of the mean rate at any given location.     

MANAGEMENT OF INSTREAM FLOWS THROUGH RUNOFF DETENTION AND RETENTION1

ABSTRACT: The use of reservoirs and land treatments to manage streamflow for the maintenance or enhancement of instream flow values is a valid concept. Historically, large reservoirs have been used for flood control and water-supply regulation. Smaller structures have enjoyed widespread use for soil and water conservation in headwater areas. Where reservoir releases can be controlled, it is technically feasible to regulate flows for the enhancement of instream values. However, institutional and political obstacles may preclude the operation of some reservoirs for this purpose. Retention and detention structures and land treatments, implemented for soil and water conservation purposes, have often had favorable effects on the streamflow hydrograph. Decreases in peak flows and increases in low flows have been documented. Design concepts for runoff-control structures are discussed in relation to instream flow management objectives. Hydro-logic simulation is offered as a potential tool for project design and feasibility analysis.     

SHORT-TERM FORECASTING OF SNOWMELT RUNOFF USING ARMAX MODELS1

ABSTRACT: Time series models of the ARMAX class were investigated for use in forecasting daily riverflow resulting from combined snowmelt/rainfall. The Snowmelt Runoff Model (Martinec-Rango Model) is shown to have a form similar to the ARMAX model. The advantage of the ARMAX approach is that analytical model identification and parameter estimation techniques are available. In addition, previous forecast errors can be included to improve forecasts and confidence limits can be estimated for the forecasts. Diagnostic checks are available to determine if the model is performing properly. Finally, Kalman filtering can be used to allow the model parameters to vary continuously to reflect changing basin runoff conditions. The above advantages result in improved flow forecasts with fewer model parameters.