Development,validation and application of a method to analyze phenols in water samples by solid phase micro extraction-gas chromatography-flame ionization detector

In this work the development, validation and application of method using Solid Phase Microexctration (SPME) for the analyses of five pollutants (phenol, 2-nitrophenol, 2,4-dimethylphenol, 2,4-dichlorophenol and 4-chloro, 3-methyl phenol) in supplying water, using gas chromatography (GC) with flame ionization detector (FID) is described. The optimal conditions obtained for SPME were: fiber type: Poliacrylate (PA); extraction time: 40 minutes; extraction temperature: 70°C; amount of salt added to sample (NaCl): 15%; desorption temperature: 8 minutes. The parameters studied in the method validation were: limit of detection (0.3 and 3.5 μ g.L^{? 1}); precision, measured by the variation coefficient (between 2.1 and 8.8%); calibration curve and linearity, by using the external standardization method (between 1 and 50 50 μ g.L^{? 1}). After the methodology development, samples of water collected in Atibaia River (São Paulo - Brazil) were analyzed, using the optimized methodology. Three water samples collected in the rain season showed a peak with retention time close to 4-chloro, 3 methyl phenol further analyzed by Gas Chromatography-Mass Spectrometry for the identity confirmation. In spite of the fact that none target compounds were found in the river water samples analyzed, the presence of two phenols different from those investigated (p-terc butyl phenol; butylated hydroxytoluene) were detected. These results together with the results of the limit of detection (that showed to be lower than the maximum concentration of phenols demanded by different environment control agencies), and the results of the validation, indicate the applicability of this method for the analysis of selected phenols in river water samples.     

Exposure to chemical mixtures in Mexican children: high-risk scenarios

In developing countries, the management of environmental toxicants is inadequate, thus, humans may be exposed to levels higher than normal levels (background levels). Therefore, the aim of this study was to evaluate the exposure level of Mexican children to dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethylene (DDE), lead, and polycyclic aromatic hydrocarbons [using 1-hydroxypyrene (1-OHP) as exposure biomarker] and to assess the percentage of children exposed to these four compounds at concentrations higher than normal in each community studied. We performed random sampling in eight communities in Mexico (five communities in Chiapas State and three communities in San Luis Potosi State). DDT and DDE were analyzed by gas chromatography/mass spectrometry, the quantification of lead in blood was performed using atomic absorption spectrophotometry, and 1-OHP analyses were performed using HPLC with a fluorescence detector. Elevated DDT, DDE, and 1-OHP levels were found in children living in the indigenous communities of Chiapas State, while higher blood lead levels were found in two communities in San Luis Potosí. Approximately 30 % of children living in Chiapas were exposed to all four compounds at concentrations above the guidelines for each compound, whereas 48 % of children studied were exposed to all four contaminants at concentrations higher than normal in a community in San Luis Potosí State. As expected, our results showed that in hot spots, children are exposed to levels higher than normal. Therefore, child environmental health programs are urgently needed.     

Estimation of hydrogen sulfide emission rates at several wastewater treatment plants through experimental concentration measurements and dispersion modeling

The management and operation of wastewater treatment plants (WWTP) usually involve the release into the atmosphere of malodorous substances with the potential to reduce the quality of life of people living nearby. In this type of facility, anaerobic degradation processes contribute to the generation of hydrogen sulfide (H₂S), often at quite high concentrations; thus, the presence of this chemical compound in the atmosphere can be a good indicator of the occurrence and intensity of the olfactory impact in a specific area. The present paper describes the experimental and modelling work being carried out by CEAM-UMH in the surroundings of several wastewater treatment plants located in the Valencia Autonomous Community (Spain). This work has permitted the estimation of H₂S emission rates at different WWTPs under different environmental and operating conditions. Our methodological approach for analyzing and describing the most relevant aspects of the olfactory impact consisted of several experimental campaigns involving intensive field measurements using passive samplers in the vicinity of several WWTPs, in combination with numerical simulation results from a diagnostic dispersion model. A meteorological tower at each WWTP provided the input values for the dispersion code, ensuring a good fit of the advective component and therefore more confidence in the modelled concentration field in response to environmental conditions. Then, comparisons between simulated and experimental H₂S concentrations yielded estimates of the global emission rate for this substance at several WWTPs at different time periods. The results obtained show a certain degree of temporal and spatial (between-plant) variability (possibly due to both operational and environmental conditions). Nevertheless, and more importantly, the results show a high degree of uniformity in the estimates, which consistently stay within the same order of magnitude.

Implications: Estimating emissions to the atmosphere is usually considered a complex task, especially when such discharge comes from diffuse or uncontrolled sources. In any approach to air quality control, just from the point of view of increasing knowledge or as a management problem in order to reduce present levels of pollution, accurate estimation of emission rates is revealed as a fundamental step. Evaluation from an indirect method provides a useful methodology in such cases. Combination of dispersion modeling with experimental air concentration measurements permits one to obtain a first estimation of H₂S emission rates at several wastewater treatment plants. In a subsequent refinement of the process, the initial constant average emissions calculated were improved, leading to the formulation of a time-varying emission model, as a function of environmental quantities.     

Local ecological knowledge and incremental adaptation to changing flood patterns in the Amazon delta

The need for understanding the factors that trigger human responses to climate change has opened inquiries on the role of indigenous and local ecological knowledge (ILK) in facilitating or constraining social adaptation processes. Answers to the question of how ILK is helping or limiting smallholders to cope with increasing disturbances to the local hydro-climatic regime remain very limited in adaptation and mitigation studies and interventions. Herein, we discuss a case study on ILK as a resource used by expert farmer-fishers (locally known as Caboclos) to cope with the increasing threats on their livelihoods and environments generated by changing flood patterns in the Amazon delta region. While expert farmer-fishers are increasingly exposed to shocks and stresses, their ILK plays a key role in mitigating impacts and in strengthening their adaptive responses that are leading to a process of incremental adaptation (PIA). We argue that ILK is the most valuable resource used by expert farmer-fishers to adapt the spatial configuration and composition of their land-/resource-use systems (agrodiversity) and their produced and managed resources (agrobiodiversity) at landscape, community and household levels. We based our findings on ILK on data recorded for over the last 30 years using detailed ethnographic methodologies and multitemporal landscape mapping. We found that the ILK of expert farmer-fishers and their “tradition of change” have facilitated the PIA to intensify a particular production system to optimize production across a broad range of flood conditions and at the same time to manage or conserve forests to produce resources and services.     

I-C-SEA Change: A participatory tool for rapid assessment of vulnerability of tropical coastal communities to climate change impacts

We present a synoptic, participatory vulnerability assessment tool to help identify the likely impacts of climate change and human activity in coastal areas and begin discussions among stakeholders on the coping and adaptation measures necessary to minimize these impacts. Vulnerability assessment tools are most needed in the tropical Indo-Pacific, where burgeoning populations and inequitable economic growth place even greater burdens on natural resources and support ecosystems. The Integrated Coastal Sensitivity, Exposure, and Adaptive Capacity for Climate Change (I-C-SEA Change) tool is built around a series of scoring rubrics to guide non-specialists in assigning scores to the sensitivity and adaptive capacity components of vulnerability, particularly for coral reef, seagrass, and mangrove habitats, along with fisheries and coastal integrity. These scores are then weighed against threat or exposure to climate-related impacts such as marine flooding and erosion. The tool provides opportunities for learning by engaging more stakeholders in participatory planning and group decision-making. It also allows for information to be collated and processed during a “town-hall” meeting, facilitating further discussion, data validation, and even interactive scenario building.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0652-x) contains supplementary material, which is available to authorized users.     

Distribution of heavy metal contents of urban soils in parks of Seville

Several metals in urban soils of Seville were extracted by two methods, which respectively give estimates of the available and ‘quasi total’ contents. Although the soils did not show strong heterogeneity in their general properties, high dispersion of the contents in those metals with greater relative availability, Cu, Pb and Zn, as compared to others suggested that pollution with these three metals could occur in some sampling sites. It was shown that the contents in these metals tend to increase as the historic quarters of the city are approached. Using reference values given by the Québec Ministry of Environment it was shown that those green areas closer to the historic centre present contents in Pb, Zn and particularly Cu that often exceed the acceptable limits for residential, recreational and institutional sites. From background contents for Seville soils estimated from a park located on the outskirts, a pollution load index (PLI) for each sampling site was calculated for the set of these three metals. It was shown that the PLI tends to increase as traffic density increases and as distance from main traffic decreases, but poor regressions were obtained, suggesting that other variables different from traffic should be considered.     

Trace metals in estuarine organisms from a port region in southern Brazil: consumption risk to the local population

Environmental Science and Pollution Research - Metal contamination is a threat to estuarine environments. They can accumulate in the food chain and cause toxic effects on aquatic organisms and...     

Sustainable consumption profile differences among Brazilian regions

Brazil is a vast country and there are several scientific studies reporting sustainable behavior in its different regions. Since methodologies used in these studies differ from one another, it is hard to compare them. This paper aims to identify whether differences in sustainable behavior occur in different Brazilian regions and what differences can be identified. Through a web survey, we analyzed data from 1,489 participants, from four different regions. We identified two factors (behavior and search for information), and analyzed the differences through multivariate analysis of variance. The Northeast region had a higher score for “search for information”, while Southern regions performed better on “behavior.” The Midwest region had the worst performance for both factors. The reasons for such differences may be greatly influenced by the social/cultural context of each region. The results also show that consumers still do not use their power of choice to pressure companies to become more sustainable.     

Sequential determination and chemical speciation analysis of inorganic As and Sb in airborne particulate matter collected in outdoor and indoor environments using slurry sampling and detection by HG AAS

Environmental Science and Pollution Research - In this work, fast sequential determination and chemical speciation analysis of inorganic arsenic and antimony in airborne particulate matter...