Occurrence of chemical pollutants in major e-waste sites in West Africa and usefulness of cytotoxicity and induction of ethoxyresorufin-O-deethylase (EROD) in determining the effects of some detected brominated flame retardants and e-waste soil-derived extracts

Environmental Science and Pollution Research - We investigated the occurrence of chemical pollutants in major e-waste sites in West Africa and usefulness of cytotoxicity and induction of...     

Environmental regulation and competitive performance: new evidence from a sectoral study

Economic theory provides different perspectives on the relationship between environmental regulation and company environmental and competitive performance. A frequently analysed issue refers to the impact of environmental regulation on company performance. Using qualitative data collected within the recently completed Environmental regulation and Market forces Providing Incentives for Resource Efficiency (EMPIRE) project, we analysed the relationship between environmental regulation and company competitiveness, operating in the building and construction (B&C) sector. Empirical evidence from the correlation analysis emphasises that environmental regulation can be an important driver of competitive performance improvements in relevant segments of the European B&C sector.     

The short-chain perfluorinated compounds PFBS, PFHxS, PFBA and PFHxA, disrupt human mesenchymal stem cell self-renewal and adipogenic differentiation

Per- and polyfluorinated alkyl substances (PFASs) are commonly used in industrial processes and daily life products. Because they are persistent, they accumulate in the environment, wildlife and humans. Although many studies have focused on two of the most representative PFASs, PFOS and PFOA, the potential toxicity of short-chain PFASs has not yet been given sufficient attention. We used a battery of assays to evaluate the toxicity of several four-carbon and six-carbon perfluorinated sulfonates and carboxyl acids (PFBS, PFHxS, PFBA and PFHxA), with a human mesenchymal stem cell (hMSC) system. Our results demonstrate significant cyto- and potential developmental toxicity for all the compounds analyzed, with shared but also distinct mechanisms of toxicity. Moreover, the effects of PFBS and PFHxS were stronger than those of PFBA and PFHxA, but occurred at higher doses compared to PFOS or PFOA.     

Does daily proactivity affect well‐being? The moderating role of punitive supervision

Proactive behavior (self‐initiated and future‐oriented actions to bring about change) has largely positive consequences for organizationally oriented outcomes such as job performance. Yet the outcomes of proactivity from a well‐being perspective have not been clearly considered. Drawing on self‐determination theory and the stressor‐detachment model, we propose two distinct paths by which proactivity affects individuals' daily well‐being. The first path is an energy‐generating pathway in which daily proactive behavior enhances end‐of‐work‐day vitality via perceived competence. The second is a strain pathway in which daily proactive behavior generates anxiety at work, which undermines the process of detachment from work. We argue that these pathways are shaped by the extent to which supervisors are prone to blaming employees for their mistakes (punitive supervision). We tested this model using a sample of 94 employees who completed surveys three times a day for between 5 and 7 days. Our multilevel analyses provide support for the proposed dual‐pathway model and suggest differential well‐being outcomes of daily proactive work behavior. Overall, when an individual behaves proactively at work, they are more likely to experience higher levels of daily perceived competence and vitality. However, these positive effects can exist in parallel with daily negative effects on end‐of‐workday anxiety, and hence bedtime detachment, but only when the supervisor is perceived to be punitive about mistakes.     

Climate impact potential of utilizing forest residues for bioenergy in Norway

The utilization of forest residues for bioenergy in Norway is foreseen to increase due to the government call to double bioenergy output by 2020 to thirty Tera-Watt hours. This study focuses on the climate impacts of bioenergy utilization where four forest residue extraction scenarios at clear-cut are considered: i) 75 % above ground residues (branches, (25 %) foliage, tops); ii) 75 % above and below ground residues (branches, tops, (25 %) foliage, stumps, coarse and small roots); iii) extracting 100 % of all available forest residue; and iv) leaving all residues in the forest. The Yasso07 soil-carbon model was utilized to quantify the carbon flux to the atmosphere due to the forest residues that are left in the forest in each scenario. The climate impact potential for each scenario was then calculated for the carbon-flux neutral Norway Spruce (Picea abies) forest system in five regions of Norway. The biogenic carbon dioxide emissions associated to decomposition upon forest floor, procurement losses and bioenergy conversion are included in these calculations. Results suggest that if such bioenergy can directly replace a fossil source of energy, the utilization of this biomass was found to be climatically beneficial in most fossil energy replacement cases and time horizons when compared to leaving the residues in the forest. Integrated global temperature change displacement factors have been developed which have been used to estimate the magnitude of this climate change mitigation over a particular time horizon.     

Addressing transboundary conservation challenges through marine spatial prioritization

The Adriatic and Ionian Region is an important area for both strategic maritime development and biodiversity conservation in the European Union (EU). However, given that both EU and non‐EU countries border the sea, multiple legal and regulatory frameworks operate at different scales, which can hinder the coordinated long‐term sustainable development of the region. Transboundary marine spatial planning can help overcome these challenges by building consensus on planning objectives and making the trade‐offs between biodiversity conservation and its influence on economically important sectors more explicit. We address this challenge by developing and testing 4 spatial prioritization strategies with the decision‐support tool Marxan, which meets targets for biodiversity conservation while minimizing impacts to users. We evaluated these strategies in terms of how priority areas shift under different scales of target setting (e.g., regional vs. country level). We also examined the trade‐off between cost‐efficiency and how equally solutions represent countries and maritime industries (n = 14) operating in the region with the protection‐equality metric. We found negligible differences in where priority conservation areas were located when we set targets for biodiversity at the regional versus country scale. Conversely, the prospective impacts on industries, when considered as costs to be minimized, were highly divergent across scenarios and biased the placement of protection toward industries located in isolation or where there were few other industries. We recommend underpinning future marine spatial planning efforts in the region through identification of areas of national significance, transboundary areas requiring cooperation between countries, and areas where impacts on maritime industries require careful consideration of the trade‐off between biodiversity conservation and socioeconomic objectives.     

Accounting for adaptation and its effectiveness in International Environmental Agreements

Environmental Economics and Policy Studies - This paper analyses, within a standard International Environmental Agreement game, the effect of the introduction of adaptation on climate negotiation....     

In-Process Measurements of Flow Characteristics of Wood Plastic Composites

The flow characteristics of polypropylene filled with high percentages of wood flour (50 and 70 wt%) are investigated at a feasible processing temperature (195 °C). Rotational rheometry in oscillatory mode in conjunction with the Cox–Merz rule is ineffective at this temperature due to insufficient linear viscoelastic region (LVR) size and ease of fibres degradation. An in-line rheometer, directly attached to a single screw extruder, is used to avoid these problems: this method allows measurements in real processing conditions with no LVR issues and with reduced degradation risks. The 70 wt% displays plug flow, thus it has been impossible to obtain the flow curve but only the slip velocity as a function of shear stress. The 50 wt% could be corrected for slip using the Mooney procedure. Comparing the flow curve of this material with the ones of the 30 wt% and the unfilled polypropylene matrix, a single master-curve can be obtained and modelled with a Carreau–Yasuda equation.     

Mechanical properties of Municipal Solid Waste by SDMT

In the paper the results of a geotechnical investigation carried on Municipal Solid Waste (MSW) materials retrieved from the “Cozzo Vuturo” landfill in the Enna area (Sicily, Italy) are reported and analyzed. Mechanical properties were determined both by in situ and laboratory large-scale one dimensional compression tests.While among in situ tests, Dilatomer Marchetti Tests (DMT) is used widely in measuring soil properties, the adoption of the DMT for the measurements of MSW properties has not often been documented in literature. To validate its applicability for the estimation of MSW properties, a comparison between the seismic dilatometer (SDMT) results and the waste properties evaluated by laboratory tests was carried out.Parameters for “fresh” and “degraded waste” have been evaluated. These preliminary results seems to be promising as concerns the assessment of the friction angle of waste and the evaluation of the S-wave in terms of shear wave velocity. Further studies are certainly required to obtain more representative values of the elastic parameters according to the SDMT measurements.     

Recycling-oriented characterization of polyolefin packaging waste

Packaging waste is one of the main sources of secondary polyolefins. It is essential to characterize polyolefins derived from this waste stream in such way, that not only mechanical sorting methods can effectively separate, but also that on-line sensor systems can quantitatively assess their distribution. The characterization methodology is hierarchical, relating all properties of waste particles in any phase of the processing ultimately to the input End-Of-Life products. The present paper documents a pre-concentrate obtained by hand picking of mixed Romanian household waste. Investigations have been addressed to identify the composition of this polyolefin waste stream, to study the polyolefin density distribution, to distinguish the polymer manufacturing methods (i.e. injection molding and blow molding) by flake physical properties and finally to perform all the required characterization and identification by hyperspectral imaging. On the basis of these analyses, polyolefins from packaging wastes can be recycled by density separation and their rheological properties and wall thickness indicate the molding procedures. Hyperspectral imaging based procedures have been also applied to set up quality control actions for recycled products.