Treatment of exhaust fluorescent lamps to recover yttrium: experimental and process analyses

The paper deals with recovery of yttrium from fluorescent powder coming from dismantling of spent fluorescent tubes. Metals are leached by using different acids (nitric, hydrochloric and sulphuric) and ammonia in different leaching tests. These tests show that ammonia is not suitable to recover yttrium, whereas HNO(3) produces toxic vapours. A full factorial design is carried out with HCl and H(2)SO(4) to evaluate the influence of operating factors. HCl and H(2)SO(4) leaching systems give similar results in terms of yttrium extraction yield, but the last one allows to reduce calcium extraction with subsequent advantage during recovery of yttrium compounds in the downstream. The greatest extraction of yttrium is obtained by 20% w/v S/L ratio, 4N H(2)SO(4) concentration and 90°C. Yttrium and calcium yields are nearly 85% and 5%, respectively. The analysis of variance shows that acid concentration alone and interaction between acid and pulp density have a significant positive effect on yttrium solubilization for both HCl and H(2)SO(4) medium. Two models are empirically developed to estimate yttrium and calcium concentration during leaching. Precipitation tests demonstrate that at least the stoichiometric amount of oxalic acid is necessary to recover yttrium efficiently and a pure yttrium oxalate n-hydrate can be produced (99% grade). The process is economically feasible if other components of the fluorescent lamps (glass, ferrous and non-ferrous scraps) are recovered after the equipment dismantling and valorized, besides the cost that is usually paid to recycling companies for collection, treatment or final disposal of such fluorescent powders.     

End-of-Life Vehicles management: Italian material and energy recovery efficiency

Each European Member State must comply with Directive 2000/53/EC recycling and recovery targets by 2015, set to 85% and 95%, respectively. This paper reports a shredder campaign trial developed and performed in Italy at the beginning of 2008. It turns out to be the first assessment about the critical aspects belonging to the Italian End-of-Life Vehicles (ELVs) reverse supply chain involving 18 dismantling plants, a shredder plant and 630 ELV representatives of different categories of vehicles treated in Italy during 2006. This trial aims at improving the experimental knowledge related to ELVs added waste, pre-treatment, part reuse, recycling and final metal separation and car fluff disposal. Finally, the study also focuses on the calculation of the effective Italian ELV recycling rate, which results equal to 80.8%, and auto shredder residue (ASR) characterization. According to the results obtained in this work, ASR still contains up to 8% of metals and 40% of polymers that could be recovered. Moreover, physical-chemical analysis showed a Lower Heat Value of almost 20,000 kJ/kg and revealed the presence of pollutants such as heavy metals, mineral oils, PCBs and hydrocarbons.     

Indicators of waste management efficiency related to different territorial conditions

The amount of waste produced and the control of separate collection are crucial issues for the planning of a territorial Integrated Waste Management System, enabling the allocation of each sorted waste fraction to the proper treatment and recycling processes. The present study focuses on assessing indicators of different waste management systems in areas characterized by different territorial conditions. The investigated case study concerns the municipalities of Emilia Romagna (northern Italy), which present a rather uniform socioeconomic situation, but a variety of geographic, urban and waste management characteristics. A survey of waste generation and collection rates was carried out, and correlated with the different territorial conditions, classifying the municipalities according to altitude and population density. The best environmental performances, in terms of high separate collection rate, were found on average in rural areas in the plain, while the lowest waste generation was associated with rural hill towns.     

Life cycle assessment of urban waste management: energy performances and environmental impacts. The case of Rome, Italy

Landfilling is nowadays the most common practice of waste management in Italy in spite of enforced regulations aimed at increasing waste pre-sorting as well as energy and material recovery. In this work we analyse selected alternative scenarios aimed at minimizing the unused material fraction to be delivered to the landfill. The methodological framework of the analysis is the life cycle assessment, in a multi-method form developed by our research team. The approach was applied to the case of municipal solid waste (MSW) management in Rome, with a special focus on energy and material balance, including global and local scale airborne emissions. Results, provided in the form of indices and indicators of efficiency, effectiveness and environmental impacts, point out landfill activities as the worst waste management strategy at a global scale. On the other hand, the investigated waste treatments with energy and material recovery allow important benefits of greenhouse gas emission reduction (among others) but are still affected by non-negligible local emissions. Furthermore, waste treatments leading to energy recovery provide an energy output that, in the best case, is able to meet 15% of the Rome electricity consumption.     

A screening model for fate and transport of biodegradable polyesters in soil

A numerical model for predicting the fate and transport of biodegradable polyester residues in soil, following successive applications of mulch film, was developed and applied. The polymer, applied on surface soil, was assumed to be converted into by-products (monomers), according to a first order kinetics with constant K(1deg). The monomers released were assumed to sorb on soil organic matter (according to a first-order kinetics with constant K(s)), to be leached with the seepage water, through vertical advection and hydrodynamic dispersion, and biodegraded (according to a first-order kinetics with constant K(b)). Results suggested that, to assess a possible build-up of mulch film (as a polymer) on the surface soil, the degradation constant K(1deg) relating the polymer conversion to by-products should be known, whereas the biodegradation constant K(b) indicates there is no danger of groundwater pollution. Likewise, on the basis of by-product concentration in deep soil, soil pollution should not occur.     

Adsorption of nutrients and cadmium by different minerals: experimental studies and modelling

This work analyses cadmium sorption by natural vermiculite, zeolite, and pumice, which have been recently considered for their potential use in remediation of contaminated soils. Batch experiments were performed to investigate the interactions between the mineral surfaces and the main nutritive cations of Hoagland solution. In addition to their ameliorative effect of reducing metal mobility, these minerals are able to interact to different extents with various components of the nutrient solution and can change the availability of essential nutrients in solution. Therefore, the minerals were also exposed to a range of cadmium doses to compare their different affinities for this element and to analyse the cadmium–nutrient interactions. The results showed that the nutrient solution composition was significantly modified by contact with zeolite and vermiculite, and to a minor extent with pumice. The ionic equilibrium between the solid and aqueous phases was attained at several time points depending on the cation. Ammonium and potassium ions were almost entirely absorbed by zeolite, while in vermiculite endogenous magnesium ions were exchanged with the liquid phase calcium ions. The amount of cadmium adsorbed on mineral surfaces equilibrated with the nutrient solution showed the following sequence zeolite>vermiculite>pumice, and the cation concentrations of the fluid phase were sensitive to cadmium addition.     

Bisphenol A and Bisphenol S release in milk under household conditions from baby bottles marketed in Italy

A simple and sensitive validated analytical method based on liquid chromatography coupled to tandem fluorescence (FD) and ultraviolet (UV) spectrophotometry was applied to monitor the presence of bisphenol A and bisphenol S in plastic baby bottles marketed in Italy. The limits of detection (LOD) were 3.75 ng mL^?1 and 80.00 ng mL^?1, and those of quantification (LOQ) were 12.51 ng mL^?1 and 260.00 ng mL^?1 for BPA (FD detection) and for BPS (UV detection), respectively. BPA was found in only four samples, two samples undergone to microwave heating and two samples undergone to bottle warmer heating either at 40°C or at 80°C. Although the quantities of leached BPA were well below the reference dose for daily intake established by the European Food Safety Authority (EFSA) (4.0 µg kg^?1 bw/day), the release of BPA and BPS from these plastic materials should be carefully considered by the government authorities to increase people's awareness on this issue and to protect the most vulnerable population group.     

Crossing technology and sustainability in cities’ development

This paper deals with sustainability in cities and the role technology plays in furthering sustainable results. Recently, many interventions have been implemented in cities to propose paths and models promoting the sustainability of cities from an overall perspective. Technologies are favouring the achievement of aims recalling the three spheres of sustainability as proposed by Arcadis (2017), namely “planet”, “profit”, and “people”. The ties between technology and the three spheres are investigated through a content analysis of reports issued by the 10 cities with the most significant advances in terms of becoming sustainable cities, as indicated in the Arcadis Report 2016. The results highlight technology as an element crossing sustainability, as processes and models in cities management and service provisions to citizens are significantly changing. New tools are innovating the processes addressing environmental issues, thus leading to cost efficiency and better economic conditions. Parallel to this, new models for city management and the provision of public services are addressing the need for a better quality of life for citizens and cities’ other stakeholders. Technology itself is thought of as sustainable because it should lead to efficiency and being efficient itself. A qualitative cluster analysis and a focus on excerpts from reports are proposed to highlight the ties between technologies and the elements representing key issues in managing and leading a city towards more sustainable conditions.     

Public regulatory relief and the adoption of environmental management systems: a European survey

An increasing number of organizations across the world have adopted Environmental Management Systems (EMSs) based on certifiable standards, notably the European Eco-Management and Audit Scheme (EMAS) and the ISO 14001 standards. Although the specialized literature has studied the motivations, obstacles and benefits of the adoption of these standards for EMSs extensively, the impact of the public incentives on the adoption of such environmental management tools has been overlooked. In order to fill this gap in the literature, this article aims to shed light on the level of companies' knowledge and application of the main regulatory relief initiatives provided by public administrations around the EU for organizations with a certified EMS. For that purpose, this article summarizes the main findings of a survey carried out with the participation of 244 European EMAS-registered organizations. The findings of the survey highlight the fact that most of the surveyed companies have adopted or benefitted from some form of regulatory relief, mainly by making use of the measures granting an extended duration of some permits (44%), reductions in financial guarantees in the waste-treatment sector (31%) and tax reductions (26%). Moreover, it emerges that, among countries, the role of regulatory relief to support companies in the path to the adoption of EMSs is not univocal.     

Bioherbicidal activity of a germacranolide sesquiterpene dilactone from Ambrosia artemisiifolia L.

Ambrosia artemisiifolia L. (common ragweed) is an invasive plant whose allelopathic properties have been suggested by its field behaviour and demonstrated through phytotoxicity bioassays. However, the nature of the molecules responsible for the allelopathic activity of common ragweed has not been explored. The main objective of this study was to identify the phytotoxic molecules produced by A. artemisiifolia. A preliminary investigation has indicated that a methanol extract of A. artemisiifolia completely inhibited the germination of cress and radish. Semi-preparative fractionation of the methanol extract allowed separating of phytotoxic fraction which contained a single compound. The structure of this compound was elucidated by liquid chromatography–mass spectrometry (LC-MS)/MS, high-resolution mass spectral, nuclear magnetic resonance, and Fourier transform infrared spectra as sesquiterpene lactone isabelin (C₁₅H₁₆O₄). The effect of pure isabelin was tested on four different weed species, confirming the inhibitory activity of molecule. The results indicate directions for the future studies about herbicidal specific activity of isabelin, as pure molecule or in the crude extract, as a potential candidate for biological weed control.