A comparison of two techniques for studying sediment desorption kinetics of hydrophobic pollutants

A comparison of two techniques (gaseous purge and vial desorption) for studying the kinetics of desorption of hydrophobic pollutants from natural sediments was conducted using identical, pre-equilibrated pollutant-sediment suspensions. Desorption profiles for the two techniques [for Lindane, Aldrin, 2,2'-dichlorobiphenyl (2,2'-DCB), 4,4'-dichlorobiphenyl (4,4'-DCB), and 2,2',6,6'-tetrachlorobiphenyl (TCB)] were then compared, based on the distribution of pollutant mass between the labile (fast) and non-labile (slow) desorption phases and the release rate constants for each phase of release. The vial desorption technique shows many practical advantages over the gaseous purge technique, including its more realistic mixing conditions, the use of an independent sample for each data point (as opposed to a calculation of a cumulative mass purged at each time point), the fact that the vials constitute a closed system and are therefore less subject to ambient contamination, and the relatively low demands of time and money for the vial technique. No consistent trends in labile rate constants or in pollutant distribution between the labile and non-labile phase were observed between the two techniques. A comparison of kinetic parameters shows much faster non-labile rate constants for the gaseous purge technique, attributed to the violent, continuous agitation employed, which likely disrupted sediment aggregates and oxidized the natural organic matter associated with the sediment. Non-labile rate constants have implications for the long-term fate of compounds adsorbed to repetitively disturbed sediments. This study suggests that the traditionally less popular vial desorption technique may yield more realistic non-labile desorption rate constants.     

‘A powerful alternative to Williams’ test with application to toxicological dose-response relationships of normally distributed data

The comparison of increasing doses of a treatment to a negative control is frequently part of toxicological studies. For normally distributed data Williams (1971, 1972) introduced a maximum likelihood test under total order restriction. But until now there seems to have been no solution for the arbitrary unbalanced case. According to the idea proposed by Robertson et al. (1988) we will apply in this article the basic concept of Williams on the class of multiple contrast tests for the general unbalanced parametric set-up. Simulation results for size and power and two examples for estimating the minimal toxic dose (MTD) are given.     

Ökotoxikologische und humantoxikologische Risikobewertung PAK-belasteter Böden vor und nach biologischer Behandlung

The goal of the present work is to assess the adverse effects of soil bound polycyclic aromatic hydrocarbons (PAH) which remain in soils after biological remediation. We focus on risk assessment for mammalian species with respect to the oral uptake of contaminated soil particles and compare the results of a biomarker test with those of an ecotoxicological assay, the bioluminescence inhibition test withVibrio fischeri. As a biomarker effect in mammals, we determined the liver microsomal cytochrome P450 enzyme CYP1A1 which is induced by PAH in exposed rats. After biological soil treatment, different amounts of PAH remain in the soil depending on the soil properties and initial pollutant composition. Particularly, higher condensated PAH resists biological treatment due to its hydrophobicity. In addition, high amounts of organic carbon in the soils affect remediation efficiency. In the bioluminescence inhibition test, eluates of all biologically treated soils studied do not reveal any or only low inhibitory effects. In contrast, the oral uptake of biologically treated contaminated soils leads to induction levels for CYP1A1 similar to those in the untreated samples. A good correlation is obtained between CYP1A1 levels and the amount of 5 and 6-ring PAH in the soil samples. The main result is that the remediation efficiency determined by the luminescence test is not reflected by the biomarker test, a finding which indicates the high bioavailability of residual PAH in soils. Consequently, new criteria for human risk assessment can be delineated.     

Quality Control for Environmental Policy Appraisal Tools: An Empirical Investigation of Relations Between Quality,Quality Control and Effectiveness

The spectre of regulatory reform carried out in a range of Western countries has generated concern amongst parts of the environmental policy community. Quality and effectiveness are said to be at stake, but empirically there is a dearth of data on the relationship between provisions for quality control and the effects on quality and effectiveness. This research addresses this lacuna by analysing the effects of different quality control provisions in the Netherlands and Denmark for a globally institutionalized environmental appraisal tool—Environmental Assessment (EA). Extensive technical provisions for quality control in the Netherlands have led to it being described as the ‘Rolls Royce’ of EA systems, while in Denmark the polity is expected to take charge of quality control. The effects of quality control are investigated through surveys and in-depth interviews with actors centrally engaged with EA implementation. The results show that quality control provisions are poorly related to the perceived quality and effectiveness of EA. Only the appropriateness of the scope of EA reports is perceived to be strongly related to quality control provisions. The findings are relevant for environmental policy communities concerned with quality control systems and effectiveness of policy appraisal tools and policy-makers contemplating regulatory reforms.     

Evaluation of a population mobility,mortality, and birth surveillance system in South Kivu,Democratic Republic of the Congo

Prospective, community-based surveillance systems for measuring birth, death, and population movement rates may have advantages over the ‘gold-standard’ retrospective household survey in humanitarian contexts. A community-based, monthly surveillance system was established in South Kivu, Democratic Republic of the Congo, in partnership with a local implementing partner and the national ministry of health. Data were collected on the occurrence of births, deaths, arrivals, and departures over the course of one year, and a retrospective survey was conducted at the end of the period to validate the information. Discrepancies between the two approaches were resolved by a third visit to the households with discordant records. The study found that the surveillance system was superior in terms of its specificity and sensitivity in measuring crude mortality and birth rates as compared to the survey, demonstrating the method's potential to measure accurately important population-level health metrics in an insecure setting in a timely, community-acceptable manner.     

A Rapid Method for Assessing the Environmental Performance of Commercial Farms in the Pampas of Argentina

The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.     

Comprehensive analysis of the carbon impacts of vehicle intelligent speed control

In recent years sophisticated technologies have been developed to control vehicle speed based on the type of road the vehicle is driven on using Global Positioning Systems and in-car technology that can alter the speed of the vehicle. While reducing the speed of road vehicles is primarily of interest from a safety perspective, vehicle speed is also an important determinant of vehicle emissions and thus these technologies can be expected to have impacts on a range of exhaust emissions. This work analyses the results from a very large, comprehensive field trial that used 20 instrumented vehicles with and without speed control driven almost 500,000 km measuring vehicle speed at 10 Hz. We develop individual vehicle modal emissions models for CO₂ for 30 Euro III and Euro IV cars at a 1-Hz time resolution. Generalized Additive Models were used to describe how emissions from individual vehicles vary depending on their driving conditions, taking account of variable interactions and time-lag effects. We quantify the impact that vehicle speed control has on-vehicle emissions of CO₂ by road type, fuel type and driver behaviour. Savings in CO₂ of ≈6% were found on average for motorway-type roads when mandatory speed control was used compared with base case conditions. For most other types of road, speed control has very little effect on emissions of CO₂ and in some cases can result in increased emissions for low-speed limit urban roads. We also find that there is on average a 20% difference in CO₂ emission between the lowest and highest emitting driver, which highlights the importance of driver behaviour in general as a means of reducing emissions of CO₂.     

The World Needs a New Energy Paradigm

During 19–20 October 2009, the Royal Swedish Academy of Sciences arranged the international symposium Energy 2050 in Stockholm. The symposium was held in association with the Swedish EU presidency in autumn 2009. Internationally renowned scientists assessed the energy issue in a broad perspective, with particular emphasis on the possibilities of a fossil-free future. The symposium focused on key topics emanating from the in-depth energy studies carried through by the Academy´s Energy Committee since 2005. The world community is facing a challenge of historic proportions to define a new energy paradigm based on fossil-energy substitutes. This article gives an overview of the current global energy situation (2007) and of the technologies which have the major potential for supplying energy up to year 2050 without jeopardizing the CO₂ emission targets.     

Enhancing consultation practices on Air Quality Management in local authorities

Schedule 11 of the Environment Act 1995 underpins the requirement for consultation on air quality issues. The ongoing air quality review and assessment process represents one of the largest locally based science policy and communication initiatives ever undertaken in the UK. This paper outlines the practice of consultation and communication for Air Quality Management (AQM) and reviews the interaction between Environmental Health professionals, as the leading actor in the AQM process and other stakeholders involved in air quality consultation, including the public. Results are presented from a widespread questionnaire survey of English local authorities. Data indicate that the majority of air quality consultation has been carried out with statutory consultees (by sending the review and assessment reports) and the public (via websites and leaflets) in the form of information dissemination.     

Chemical Leasing business models and corporate social responsibility

Chemical Leasing is a service-oriented business model that shifts the focus from increasing sales volume of chemicals towards a value-added approach. Recent pilot projects have shown the economic benefits of introducing Chemical Leasing business models in a broad range of sectors. A decade after its introduction, the promotion of Chemical Leasing is still predominantly done by the public sector and international organizations. We show in this paper that awareness-raising activities to disseminate information on this innovative business model mainly focus on the economic benefits. We argue that selling Chemical Leasing business models solely on the grounds of economic and ecological considerations falls short of branding it as a corporate social responsibility initiative, which, for this paper, is defined as a stakeholder-oriented concept that extends beyond the organization’s boundaries and is driven by an ethical understanding of the organization’s responsibility for the impact of its business activities. For the analysis of Chemical Leasing business models, we introduce two case studies from the water purification and metal degreasing fields, focusing on employees and local communities as two specific stakeholder groups of the company introducing Chemical Leasing. The paper seeks to demonstrate that Chemical Leasing business models can be branded as a corporate social responsibility initiative by outlining the vast potential of Chemical Leasing to improve occupational health and safety and to strengthen the ability of companies to protect the environment from the adverse effects of the chemicals they apply.