Virulence profiles of vancomycin-resistant enterococci isolated from surface and ground water utilized by humans in the North West Province,South Africa: a public health perspective

Environmental Science and Pollution Research - Vancomycin-resistant enterococci (VRE) have been responsible for numerous outbreaks of serious infections in humans worldwide. Enterococcus faecium...     

Role of age and injury mechanism on cervical spine injury tolerance from head contact loading

Objective: The objective of this study was to determine the influence of age and injury mechanism on cervical spine tolerance to injury from head contact loading using survival analysis.

Methods: This study analyzed data from previously conducted experiments using post mortem human subjects (PMHS). Group A tests used the upright intact head–cervical column experimental model. The inferior end of the specimen was fixed, the head was balanced by a mechanical system, and natural lordosis was removed. Specimens were placed on a testing device via a load cell. The piston applied loading at the vertex region. Spinal injuries were identified using medical images. Group B tests used the inverted head–cervical column experimental model. In one study, head–T1 specimens were fixed distally, and C7–T1 joints were oriented anteriorly, preserving lordosis. Torso mass of 16 kg was added to the specimen. In another inverted head–cervical column study, occiput–T2 columns were obtained, an artificial head was attached, T1–T2 was fixed, C4–C5 disc was maintained horizontal in the lordosis posture, and C7–T1 was unconstrained. The specimens were attached to the drop test carriage carrying a torso mass of 15 kg. A load cell at the inferior end measured neck loads in both studies. Axial neck force and age were used as the primary response variable and covariate to derive injury probability curves using survival analysis.

Results: Group A tests showed that age is a significant (P < .05) and negative covariate; that is, increasing age resulted in decreasing force for the same risk. Injuries were mainly vertebral body fractures and concentrated at one level, mid-to-lower cervical spine, and were attributed to compression-related mechanisms. However, age was not a significant covariate for the combined data from group B tests. Both group B tests produced many soft tissue injuries, at all levels, from C1 to T1. The injury mechanism was attributed to mainly extension. Multiple and noncontiguous injuries occurred. Injury probability curves, ±95% confidence intervals, and normalized confidence interval sizes representing the quality of the mean curve are given for different data sets.

Conclusions: For compression-related injuries, specimen age should be used as a covariate or individual specimen data may be prescaled to derive risk curves. For distraction- or extension-related injuries, however, specimen age need not be used as a covariate in the statistical analysis. The findings from these tests and survival analysis indicate that the age factor modulates human cervical spine tolerance to impact injury.     

Alkoxy-silyl Induced Agglomeration: A New Approach for the Sustainable Removal of Microplastic from Aquatic Systems

The substance class of inert organic-chemical stressors (IOCS) describes organic-chemical (macro-) molecules, which demonstrate a high level of persistence upon entry in the ecosystem, and whose degradation is limited. These synthetically produced organic-chemical macromolecules, which are often derived from the polymerization of different monomers, are, in the form of plastics, indispensable in the everyday world. They enter the environmental compartments and cause great damage due to primary (industry, cosmetic, washing of textile), and secondary (degradation) entry. If these particles get into aquatic systems, this has fatal consequences for the ecosystem such as the death of marine animals, or bioaccumulation. Wastewater treatment plants are reaching their limits and require innovative ideas for the sustainable removal of microplastic. This article examines a new approach to the removal of polymers from aquatic systems (lab scale) by using sol–gel induced agglomeration reactions to form larger particle agglomerates. These enlarged agglomerates can be separated much more easily from the wastewater, since they float on the water surface. Separation systems, e.g. sand trap can easily be used. A further advantage is that the agglomeration can be carried out completely independently of the type, size, and amount of the trace substance concentration as well as of the external influences (pH value, temperature, pressure). Thus, this new type of particle separation can not only be used in sewage treatment plants, but can also be transferred to decentralized systems (e.g. implementation in industrial processes).

Graphical Abstract

Open image in new window

     

Geoelectrical methods for monitoring geological CO2 storage: First results from cross-hole and surface–downhole measurements from the CO2SINK test site at Ketzin (Germany)

The feasibility of monitoring CO₂ migration in a saline aquifer at a depth of about 650 m with cross-hole and surface–downhole electrical resistivity tomography (ERT) is investigated at the CO₂SINK test site close to Ketzin (Germany). The permanent vertical electrical resistivity array (VERA) consists of 45 electrodes (15 in the injection well Ktzi201 and 15 in each of the two observation wells Ktzi200 and Ktzi202), successfully placed on the electrically insulated casings, in the depth range of about 590–740 m with a spacing of about 10 m. The three Ketzin wells are arranged as perpendicular triangle with distances of 50 and 100 m.First synthetic modelling studies indicate an increase of the electrical resistivity of about 200% caused by CO₂ injection, corresponding to a bulk CO₂ saturation of 50%, which is in good agreement with laboratory studies. Finite difference inversion of field data delivers three-dimensional resistivity distributions between the wells which are consistent with the reservoir modelling studies.To increase the limited observation area provided by the cross-hole measurements, additional surface–downhole measurements were deployed. A main CO₂ migration in SE–NW direction is deduced from surface to downhole resistivity experiments.The first cross-hole time-lapse results show that the resolution and the coverage of the electrode array in the Ketzin setting are sufficient to resolve the expected resistivity changes on the characteristic length scale of the electrode array. Significant resistivity changes could be measured, however, detailed information on the CO₂ plume could not be resolved yet by VERA under the existing geological circumstances.     

CO2 capture for refineries,a practical approach

This paper evaluates the opportunities and associated costs for post-combustion capture at a world-scale complex refinery. It is concluded that it is technically feasible to apply post-combustion capture at such a refinery. The costs for capture and sequestration from a gasifier are calculated to be lowest at about 30 Euro per ton; this process currently already produces a concentrated CO₂ stream. Next, the CO₂ source most suited for capture appears to be a combined stack, but there are a number of other sources that may be targeted at comparable costs. In total these sources may form about 40% of the overall refinery emissions. Our evaluations show the costs of capture from such sources based on available amine technology will be in the range of 90–120 Euro per ton, which is about 3–4 times higher than the current carbon trading values. The capture of CO₂ from a large amount of smaller CO₂ sources will bring along even much higher costs. A high-level study of the CO₂ emissions profile of a number of Shell refineries shows that, typically, up to 50% of the emitted CO₂ may be captured at similar costs. About 10–20% of concentrated CO₂ associated with hydrogen manufacturing may be captured at lower costs. The remainder of emitted dilute CO₂ will bring along significantly higher costs. Based on this study, it is concluded for the justification of the implementation of post-combustion capture at refineries, either a significant increase in carbon trading values, mandatory regulations, or a major technological break-through is required.     

Renewable Energy

The Energy Committee of the Royal Swedish Academy of Sciences has in a series of projects gathered information and knowledge on renewable energy from various sources, both within and outside the academic world. In this article, we synthesize and summarize some of the main points on renewable energy from the various Energy Committee projects and the Committee’s Energy 2050 symposium, regarding energy from water and wind, bioenergy, and solar energy. We further summarize the Energy Committee’s scenario estimates of future renewable energy contributions to the global energy system, and other presentations given at the Energy 2050 symposium. In general, international coordination and investment in energy research and development is crucial to enable future reliance on renewable energy sources with minimal fossil fuel use.     

Genotoxicity in aquatic systems: causes, effects and future needs 3rd International Symposium, Freiburg im Breisgau, Germany, 22 to 24 September 2010

CONFERENCE ANNOUNCEMENT • FIRST ANNOUNCEMENT

Genotoxicity in aquatic systems: causes, effects and future needs 3rd International Symposium, Freiburg im Breisgau, Germany, 22 to 24 September 2010     

Urban–rural differences in atmospheric mercury speciation

Measurements of gaseous elemental mercury (GEM), particulate mercury (Hg_p), and reactive gaseous mercury (RGM) were concurrently recorded at an urban site in Detroit and a rural site in Dexter, both in Michigan for the calendar year 2004. Their average concentrations (±standard deviation) for the urban area were 2.5 ± 1.4 ng m^?3, 18.1 ± 61.0 pg m^?3, and 15.5 ± 54.9 pg m^?3, respectively, while their rural counterparts were 1.6 ± 0.6 ng m^?3, 6.1 ± 5.5 pg m^?3, and 3.8 ± 6.6 pg m^?3, respectively. The medians of urban-to-rural ratios of Hg concentrations indicate approximately 1-fold, 2-fold, and 3-fold gradients between Detroit and Dexter for GEM, Hg_p, and RGM, respectively. The urban–rural differences in Hg also varied considerably on different temporal scales and with wind flow patterns, which was most evident in RGM. Our results show that while Hg at both sites was impacted by regional sources, meteorological conditions, and photochemical transformations, the extent of variations in the observed urban-to-rural gradients, particularly in RGM, cannot be fully accounted for by these processes. Both analyses of the annual data and case studies indicate that the more variable and episodic nature of Hg, particularly RGM, seen in Detroit compared with Dexter, was the result of direct impact from local anthropogenic sources.     

Hydroxyl radical (OH) yields from the ozonolysis of both double bonds for five monoterpenes

A new method has been applied to determine OH-radical yields from the ozonolysis of both double bonds from five selected, atmospherically relevant monoterpenes, namely terpinolene, α-phellandrene, limonene, α-terpinene and γ-terpinene. While OH-yields for the faster reacting double bond agreed with previous literature values, the yields from the second double bond were determined for the first time and are as follows: limonene 7–10%, terpinolene 39–48%, α-phellandrene 8–11% and α-terpinene 12–14%. Only for γ-terpinene the rate coefficient for the reaction of ozone with the two double bonds was too similar in order to distinguish the OH-yield with this method. In all cases the yield from the second double bond was significantly lower than the first. The reasons for this difference are discussed in terms of the Criegee-intermediate reactions, in particular the number of abstractable H-atoms and the number of possible hydroperoxide products.