Integrated shoreline management and tourism development on the cross-border World Heritage Site: A case study from the Curonian spit (Lithuania/Russia)

The varied and very dynamic landscape with a high biological diversity is a distinctive feature of the Curonian spit at the regional scale. Throughout the 20th century the main morphodynamic trend in the littoral of the Curonian spit was shoreline grading on the lagoon side, whereas on the marine side the increasing erosion at the foot of the spit, and increasing accretion at the head of the spit prevailed. The results of a discriminant analysis (Wilkes’ λ = 0.001626 and F = 29.267 when p < 0.001) show that sites with prevailing erosion, accretion and sediment input from the drifting dunes form regular inter-related spatial structures in the littoral with distinctive resulting discontinuities of the sediment drift along the lagoon coast. Dune littoral cells are characterized by Aeolian sediment input and distribution ‘down-drift’, (usually northwards) from the source. The most likely changes in the current development trends of the lagoon shore zone of the Curonian spit are related to expected climate changes and further slowing down of the dune drift. The probability of storms and ice-drift events, and their impact on coasts is expected to increase as a result of climate change. The dune advance will gradually slow down, and with it, the sand input to the coastal zone will decline. In this paper, we define integrated shoreline management as a system of long-term shoreline management measures, which is based on a littoral cell approach and aimed at harmonizing human activity in the coastal zone with the natural development of the shoreline. We propose an integrated management program for the lagoon shoreline of the Curonian spit, which is site-specific for each littoral cell as a coastal management unit. Drifting dunes and seaside beaches are the natural amenities, which are best known and best appreciated on the Curonian spit by 49% of the respondents representing the total Lithuanian population. A responsible tourism development should be considered as the key means for proper appreciation of the drifting dunes and natural coasts by society, which means to acknowledge and cherish the aesthetic and conservation values of dune and coastal landscapes of the Curonian spit as a World Heritage Site. There are at least two pre-conditions for this: (1) to provide visitors with sufficient information about diverse values and functions of the Curonian dunes and coasts within a broader regional and global heritage conservation context; (2) to enable tourists to enjoy the most impressive dune and coastal landscapes at close range. In this paper we propose to encourage active dune tourism, to reintroduce grazing into the Curonian dune areas, to restore and to preserve the most impressive landscapes of the highest white drifting dunes by bringing the blown out sand from the leeward foot of the dunes back to the crest artificially.     

A GIS-based approach to spatio-temporal analysis of environmental pollution in urban areas: A case study of Prague's environment extended by LIDAR data

Environmental pollution of urban areas is one of key factors that state authorities and local agencies have to consider in the decision-making process. To find a compromise among many criteria, spatial analysis extended by geostatistical methods and dynamic models has to be carried out. In this case, spatial analysis includes processing of a wide range of air, water and soil pollution data and possibly noise assessment and waste management data. Other spatial inputs consist of data from remote sensing and GPS field measurements. Integration and spatial data management are carried out within the framework of a geographic information system (GIS). From a modeling point of view, GIS is used mainly for the preprocessing and postprocessing of data to be displayed in digital map layers and visualized in 3D scenes. Moreover, for preprocessing and postprocessing, deterministic and geostatistical methods (IDW, ordinary kriging) are used for spatial interpolation; geoprocessing and raster algebra are used in multi-criteria evaluation and risk assessment methods. GIS is also used as a platform for spatio-temporal analyses or for building relationships between the GIS database and stand-alone modeling tools. A case study is presented illustrating the application of spatial analysis to the urban areas of Prague. This involved incorporating environmental data from monitoring networks and field measurements into digital map layers. Extra data inputs were used to represent the 3D concentration fields of air pollutants (ozone, NO₂) measured by differential absorption LIDAR. ArcGIS was used to provide spatial data management and analysis, extended by modeling tools developed internally in the ArcObjects environment and external modules developed with MapObjects. Ordinary kriging methods were employed to predict ozone concentrations in selected 3D locations together with estimates of variability. Higher ozone concentrations were found above crossroads with their heavy traffic than above the surrounding areas. Ozone concentrations also varied with height above the digital elevation model. Processed data, spatial analysis and models are integrated within the framework of the GIS project, providing an approach that state and local authorities can use to address environmental protection issues.     

Chlorpyrifos degradation in Turkish soil

Degradation of chlorpyrifos was evaluated in laboratory studies. Surface (0-15 cm) and subsurface (40-60 cm) clay loam soils from a pesticide-untreated field were incubated in biometer flasks for 97 days at 25 degrees C. The treatment was 2 micrograms g-1 [2,6-pyridinyl-14C] chlorpyrifos, with 74 kBq radioactivity per 100 g soil flask. Evolved 14CO2 was monitored in KOH traps throughout the experiment. Periodically, soil subsamples were also methanol-extracted [ambient shaking, then supercritical fluid extraction (SFE)], then analyzed by thin-layer chromatography. Total 14C and unextractable soil-bound 14C residues were determined by combustion. From the surface and subsurface soils, 41 and 43% of the applied radiocarbon was evolved as 14CO2 during 3 months incubation. The time required for 50% loss of the parent insecticide in surface and subsurface soils was about 10 days. By 97 days, chlorpyrifos residues and their relative concentration (in surface/subsurface) as % of applied 14C were: 14CO2 (40.6/42.6), chlorpyrifos (13.1/12.4), soil-bound residues (11.7/11.4), and 3,5,6-trichloropyridinol (TCP) (3.8/4.8). Chlorpyrifos was largely extracted by simple shaking with methanol, whereas TCP was mainly removed only by SFE. The short persistence of chlorpyrifos probably relates to the high soil pH (7.9-8.1).     

The three-year monitoring of 18 elements in five edible mushroom species collected from an old orchard

Abstract

The content of Al, As, Be, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Ni, Rb, Se, Sr, and Zn in fruiting bodies of edible mushrooms Calocybe gambosa, Entoloma clypeatum, Entoloma saepium, Xerocomellus chrysenteron, and Amanita rubescens growing in an orchard planted with fruit trees and situated close to a high-grown forest was studied during years 2016–2018. A. rubescens showed the highest potential of the element accumulation with bioconcentration factors of 48.5, 16.2, 7.80, 6.53, 1.75, and 1.68 obtained for Rb, Cd, Cu, Zn, Sr, and Mg, respectively. Both Entoloma species accumulated the elements similarly with bioconcentration factors >1.0 obtained for Rb, Cu, Cd, and Mg. Bioconcentration factors <0.05 were obtained for Al, Cr, Fe, and Pb in all studied species. The contents of beryllium (<0.1?mg/kg dry matter) were always the lowest among the studied elements. The contents of some elements of studied mushroom species significantly fluctuated over the years. Despite the fact that some studied elements (As, Be, Cd, Pb, Ni) are considerably toxic for humans, the pronounced effect on health is not expected if the studied mushroom species are consumed occasionally and do not represent the main component of the diet.     

Quantifying the efficiency of soil sampling designs: A multivariate approach

The objective of this paper is to quantify and compare the loss functions of the standard two-stage design and its composite sample alternative in the context of multivariate soil sampling. The loss function is defined (conceptually) as the ratio of cost over information and measures design inefficiency. The efficiency of the design is the reciprocal of the loss function. The focus of this paper is twofold: (a) we define a measure of multivariate information using the Kullback–Leibler distance, and (b) we derive the variance-covariance structure for two soil sampling designs: a standard two-stage design and its composite sample counterpart. Randomness in the mass of soil samples is taken into account in both designs. A pilot study in Slovenia is used to demonstrate the calculations of the loss function and to compare the efficiency of the two designs. The results show that the composite sample design is more efficient than the two-stage design. The efficiency ratio is 1.3 for pH, 2.0 for C, 2.1 for N, and 2.5 for CEC. The multivariate efficiency ratio is 2.3. These ratios primarily reflect cost ratios; influence of the information is small.     

On vertical distribution of tintinnines (Ciliata,Oligotrichida, Tintinnina) in the open waters of the South Adriatic

The vertical distribution of tintinnines was studied in the open sea of the South Adriatic at a station near the city of Dubrovnik (Station 12) in the period from 1979–1980 as well as at 11 stations during a cruise in January 1980. Samples were taken with the 53-m Nansen type net equipped with a closing system. The hauls were taken in 7 vertical layers. In the area investigated 72 species of tintinnines were observed. Six dominating species contributed from 30 to 93%, an average of 63% of the total numerical abundance of tintinnines. Based on the occurrence of the majority of the population of individual species going from the surface towards the sea bottom, the tintinnines have been divided into 5 groups. Most of the species (42), presenting more than 90% of the population, were found in the layer between the surface and a depth of 100 m. Other species were found in deeper layers (rarely or almost never at the surface).     

Determination of selected neonicotinoid insecticides by liquid chromatography with thermal lens spectrometric detection

We studied the analysis of trace amounts of neonicotinoid insecticides by liquid chromatography coupled with a thermal lens spectrometric detector (TLS). This multi-residue analysis method is based on the reversed phase separation on C₁₈ column, isocratic elution and collinear dual beam TLS detection. The insecticides thiamethoxam, imidacloprid, acetamiprid and thiacloprid were detected with retention times of 4.4, 5.7, 6.5 and 8.5 min and limits of quantifications of 50, 89, 10, and 25 μg/L, respectively. The retention times agreed well with those obtained by the same chromatographic method but using a diode-array detector (DAD). The limits of quantifications for imidacloprid were identical in both techniques. However, the limits of quantifications for thiamethoxam, acetamiprid and thiacloprid were up to 8.5 times lower using the TLS detector compared to the diode-array detector. The applicability of the developed procedure was tested on spiked river water and potato samples.     

Post-war levels of persistent organic pollutants (POPs) in air from Serbia determined by active and passive sampling methods

For the duration of the war accident in former Yugoslavia, several industrial and military targets were burnt and damaged, resulting in a significant release of persistent organic pollutants. Locations heavily targeted in the attacks were later defined by UNEP as four “hot spots”: Kragujevac, Novi Sad, Pancevo and Bor. We analyzed concentration levels of pollutants collected in 2004 and 2005 in air samples from the city of Kragujevac, Serbia, following the war accident of 1999. Pollutants included polycyclic aromatic hydrocarbons (PAHs), hexachlorocyclohexane (HCH), dichloro-diphenyl-trichloroethane (DDT), dichloro-diphenyl-dichloroethylene (DDE), dichloro-diphenyl-dichloroethane (DDD) and polychlorinated biphenyls (PCBs). We present results obtained during air sampling campaign conducted in July 2004 by the active sampling method; and during September 2004–June 2005 by the passive sampling method. Our findings show the occurrence of residual quantities of DDT, HCH, PCBs and PAHs in air samples. High levels of PCBs are probably due to the destruction of transformers during the war accident.