Recycled and virgin plastic carriers in hybrid reactors for wastewater treatment.

The reduction of organic and nitrogen pollution of wastewater was investigated in two hybrid reactors and compared with the reduction obtained by using a conventional activated sludge reactor (ASR) run as a control. Both HR-1 and HR-2 were activated sludge systems where a low-density carrier, P1 (polyethylene) for HR-1 and P2 (recycled plastics) for HR-2, was added. Firstly, the three reactors were operated at 10 days Suspended Solid Retention Time (SRT(SS)), leading to a complete nitrification. Secondly, the SRT(SS) for each reactor was lowered to 3 days. Nitrification was lost for the ASR but remained complete for HR's. Respirometric techniques were used to measure fixed or suspended biomass activities for heterotrophic and autotrophic biomass. More than 90% of the autotrophic activity was found on the supports whatever the SRT(SS) used. The results may underline the role of the carrier geometry or surface characteristics on the autotrophic/heterotrophic microorganism distribution.     

Test procedure for evaluating the human–machine interface of vehicles with automated driving systems

Abstract

Objective: The human–machine interface (HMI) is a crucial part of every automated driving system (ADS). In the near future, it is likely that—depending on the operational design domain (ODD)—different levels of automation will be available within the same vehicle. The capabilities of a given automation level as well as the operator’s responsibilities must be communicated in an appropriate way. To date, however, there are no agreed-upon evaluation methods that can be used by human factors practitioners as well as researchers to test this.

Methods: We developed an iterative test procedure that can be applied during the product development cycle of ADS. The test procedure is specifically designed to evaluate whether minimum requirements as proposed in NHTSA’s automated vehicle policy are met.

Results: The proposed evaluation protocol includes (a) a method to identify relevant use cases for testing on the basis of all theoretically possible steady states and mode transitions of a given ADS; (b) an expert-based heuristic assessment to evaluate whether the HMI complies with applicable norms, standards, and best practices; and (c) an empirical evaluation of ADS HMIs using a standardized design for user studies and performance metrics.

Conclusions: Each can be used as a stand-alone method or in combination to generate objective, reliable, and valid evaluations of HMIs, focusing on whether they meet minimum requirements. However, we also emphasize that other evaluation aspects such as controllability, misuse, and acceptance are not within the scope of the evaluation protocol.     

Analysis of PM10 Trends in the United States from 1988 through 1995

ABSTRACT

Because the U. S. Environmental Protection Agency (EPA) has changed the National Ambient Air Quality Standards (NAAQS) for ambient particulate matter (PM), there is a great deal of interest in determining recent PM trends. This paper examines trends in PM₁₀ (i.e., particulate matter less than 10 micrometers in diameter) for areas of the United States based on their attainment status—for PM₁₀ and ozone nonattainment and attainment areas. The analysis also focuses on urban, suburban, and rural areas, and eastern and western areas. The time period of evaluation is from 1988 through 1995. To shed further light on the ambient PM₁₀ trends, trends in ambient SO₂, NO₂, and volatile organic compounds (VOCs) are also analyzed. Finally, trends in emission inventories of SO₂, NO_x, VOCs, and PM₁₀ are evaluated. Results of the analysis show that widespread and similar reductions in PM₁₀ levels have occurred over the last seven years. Annual reductions range from 3.0% to 3.8%, with the greatest reductions coming in PM₁₀ nonattainment areas, but with very significant reductions also in PM₁₀ attainment areas, ozone attainment areas, and rural areas. The widespread reductions appear to be due to a set of controls or common factors that are having a fairly uniform effect in all of the areas. The consistency of the reductions in different areas suggests that the reductions may also be primarily in the fine particles (i.e., those less than 2.5 micrometers in diameter, or PM_2.5), which are more readily transported than coarse particles.     

Inactivation of Viruses and Bacteriophages as Models for Swine Hepatitis E Virus in Food Matrices

Hepatitis E virus has been recognised as a food-borne virus hazard in pork products, due to its zoonotic properties. This risk can be reduced by adequate treatment of the food to inactivate food-borne viruses. We used a spectrum of viruses and bacteriophages to evaluate the effect of three food treatments: high pressure processing (HPP), lactic acid (LA) and intense light pulse (ILP) treatments. On swine liver at 400 MPa for 10 min, HPP gave log₁₀ reductions of ≥4.2, ≥5.0 and 3.4 for feline calicivirus (FCV) 2280, FCV wildtype (wt) and murine norovirus 1 (MNV 1), respectively. Escherichia coli coliphage ?X174 displayed a lower reduction of 1.1, while Escherichia coli coliphage MS2 was unaffected. For ham at 600 MPa, the corresponding reductions were 4.1, 4.4, 2.9, 1.7 and 1.3 log₁₀. LA treatment at 2.2 M gave log₁₀ reductions in the viral spectrum of 0.29–2.1 for swine liver and 0.87–3.1 for ham, with ?X174 and MNV 1, respectively, as the most stable microorganisms. The ILP treatment gave log₁₀ reductions of 1.6–2.8 for swine liver, 0.97–2.2 for ham and 1.3–2.3 for sausage, at 15–60 J cm^?2, with MS2 as the most stable microorganism. The HPP treatment gave significantly (p < 0.05) greater virus reduction on swine liver than ham for the viruses at equivalent pressure/time combinations. For ILP treatment, reductions on swine liver were significantly (p < 0.05) greater than on ham for all microorganisms. The results presented here could be used in assessments of different strategies to protect consumers against virus contamination and in advice to food producers. Conservative model indicators for the pathogenic viruses could be suggested.