Patterns of PCDDs and PCDFs in human milk and food and their characterization by artificial neural networks

Artificial neural network (ANN) has been recently introduced as a tool for data analysis. In this study, Kohonen's self-organizing maps (SOMs), a special type of neural network, were applied to a set of PCDD/PCDF concentrations found in 54 human milk and 83 food samples, which were collected in a number of countries all over the world. Data were obtained from the scientific literature. The purpose of the study was to find a potential relationship between PCDD/PCDF congener profiles in human milk and the dietary habits of the different countries in which samples were collected. The comparison of the SOM component planes for human milk and foodstuffs indicates that those countries with a greater fish consumption show also higher PCDD/PCDF concentrations in human milk. SOMs enable both the visualization of sample units and the visualization of congener distribution.     

Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers

This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.     

Indoor particle size distributions in homes with open fires and improved Patsari cook stoves

Particulate pollution has been clearly linked with adverse health impacts from open fire cookstoves, and indoor air concentrations are frequently used as a proxy for exposures in health studies. Implicit are the assumptions that the size distributions for the open fire and improved stove are not significantly different, and that the relationship between indoor concentrations and personal exposures is the same between stoves. To evaluate the impact of these assumptions size distributions of particulate matter in indoor air were measured with the Sioutas cascade impactor in homes using open fires and improved Patsari stoves in a rural Purepecha community in Michoacan, Mexico. On average indoor concentrations of particles less than 0.25 μm were 72% reduced in homes with improved Patsari stoves, reflecting a reduced contribution of this size fraction to PM_2.5 mass concentrations from 68% to 48%. As a result the mass median diameter of indoor PM_2.5 particulate matter was increased by 29% with the Patsari improved stove compared to the open fire (from 0.42 μm to 0.59 μm, respectively). Personal PM_2.5 exposure concentrations for women in homes using open fires were approximately 61% of indoor concentration levels (156 μg m^?3 and 257 μg m^?3 respectively). In contrast personal exposure concentrations were 77% times indoor air concentration levels for women in homes using improved Patsari stoves (78 μg m^?3and 101 μg m^?3 respectively). Thus, if indoor air concentrations are used in health and epidemiologic studies significant bias may result if the shift in size distribution and the change in relationship between indoor air concentrations and personal exposure concentrations are not accounted for between different stove types.     

Modeling the Effect of Summertime Heating on Urban Runoff Temperature1

Abstract: The summertime heating of runoff in urban areas is recognized as a common and consistent urban climatological phenomenon. In this study, a simple thermal urban runoff model (TURM) is presented for the net energy flux at the impervious surfaces of urban areas to account for the heat transferred to runoff. The first step in developing TURM consists of calculating the various factors that control how urban impervious areas absorb heat and transfer it to moving water on the surface. The runoff temperature is determined based on the interactions of the physical characteristics of the impervious areas, the weather, and the heat transfer between the moving film of runoff and the impervious surface common in urban areas. Key surface and weather factors that affect runoff temperature predictions are type of impervious surface, air temperature, humidity, solar radiation before and during rain, rainfall intensity, and rainfall temperature. Runoff from pervious areas is considered separately and estimated using the Green‐Ampt Mein‐Larson rainfall excess method. Pervious runoff temperature is estimated as the rainfall temperature. Field measurements indicate that wet bulb temperature can be used as a surrogate for rainfall temperature and that runoff temperatures from sod average just 2°C higher than rainfall temperatures. Differences between measured and predicted impervious runoff temperature average approximately 2°C, indicating that TURM is a useful tool for determining runoff temperatures for typical urban areas.     

Determination of Cu and Ni incorporation ratios in Portland cement clinker

Cu and Ni are metals found in galvanic sludges; these sludges are considered hazardous due to their heavy metal content. The main objective of this work is to determine the incorporation amount of Cu and Ni in Portland clinker when a galvanic sludge containing these metals is added to the clinker raw-material. The influence of this addition on the clinkering reactions is evaluated as well as the possibility of co-incinerating galvanic sludges containing Cu and Ni in rotary cement kilns. This study also characterizes the galvanic sludge. Samples were prepared by additions from 0.25 to 5 wt.% of a galvanic sludge to an industrial clinker raw-material. The clinkering process was simulated in a laboratory device. The following techniques were applied to characterize the raw materials and the products of the tests: chemical analysis, differential thermal analysis (DTA) and thermogravimetric analysis (TG). Leaching tests were performed in the produced clinker samples in order to verify the incorporation of the studied metals in the clinker structure. The results led to the conclusion that additions of up to 2 wt.% of a galvanic sludge containing 2.4 wt.%Cu and 1.2 wt.% Ni to clinker raw-material do not affect the clinkering reactions and that these metals are totally incorporated into the clinker.     

Recycling of printed circuit boards: ultrasound-assisted comminution and leaching for metals recovery

Journal of Material Cycles and Waste Management - The increase of electronic equipment consumption associated makes the recycling process crucial worldwide. Use of emerging technologies for...     

THE LIMNOLOGY OF LAKE WABUKAYNE,A STORM-WATER IMPOUNDMENT1

ABSTRACT The limnology of a 1.9-ha storm-water detention pond is described. The eutrophic nature of this impoundment is attributed to the nutrients in runoff from the surrounding residential area. During the summer, photosynthetic activity of the phytoplankton caused surface waters to become super-saturated with oxygen, while decomposing organic material greatly reduced dissolved oxygen concentrations in the deeper water. Sediment derived from construction activity within the drainage basin caused the impoundment to be turbid. The use of road deicing salts within the drainage basin produced high chloride concentrations and a temporary meromixis during the winter and early spring. The benthic fauna consisted primarily of oligochaetes, chironomids, and chaoborids. High densities of oligochaetes were present in the settling basin. Chaoborid larvae were abundant in the deep basin where low oxygen concentrations reduced the numbers of other benthic macroinvertebrates.     

DNA microsatellite variability and genetic differentiation among natural populations of the Cuban white shrimp<Emphasis Type="Italic"> Litopenaeus schmitti</Emphasis>

Genetic variability within the Cuban population of the white shrimp Litopenaeus schmitti (Burkenroad, 1936) was assessed using five microsatellite loci and samples collected from four sites (Batabanó, Cienfuegos, Tunas de Zaza, and Manzanillo) from November 1999 to March 2000. All loci were polymorphic, and a total of 80 alleles were found, 13 of them private alleles occurring only in a single population and always in low frequencies. The Cienfuegos sample had the highest observed heterozygosity (H_o=0.653), and the Tunas de Zaza sample had the lowest values (H_o=0.605), but there were no significant differences among samples in heterozygosity or in the mean numbers of alleles per locus (ranging from 11.0 to 11.6). Significant differentiation among populations was detected (F_ST=0.012, P<0.001). Low but significant F_ST values were revealed in pairwise comparisons between populations. Assignation tests correctly assigned high percentages of individuals to their original populations (74.5%) using a Bayesian approach. The significant differentiation among populations could be due to the restriction of gene flow among populations of L. schmitti and is concordant with previous allozyme studies on Cuban populations.Communicated by J.P. Grassle, New Brunswick